Flextronics International

New PKJ7200 and PKJ7300 Power Modules Provide Output Voltages of 12V, 13.8V, 15V, 24V, 48V and 54V
Controls & Controllers

New PKJ7200 and PKJ7300 Power Modules Provide Output Voltages of 12V, 13.8V, 15V, 24V, 48V and 54V

Designed for demands of EN 50155 standard for railway applications including surge protection, power interruption/backup, wide operating temperature range and resistance to shock and vibration. Achieves high efficiency of up to 92% at full load reducing power dissipation. Handles harsh input voltage conditions to cope with brownouts and transients that can occur in railway rolling stock.

Read More »
New PMU8000 Series PoL Regulators Meet IEC/EN/UL62368-1 Standard
Controls & Controllers

New PMU8000 Series PoL Regulators Meet IEC/EN/UL62368-1 Standard

Features configurable soft start and loop optimization that enables design engineers to optimize load transient response for different capacitive loads. Comes in 7.5 x 7.5 x 5.4 mm package and offer high efficiency of typically 95.3 % which can be used in harsh conditions. Applications include FPGAs, ASICs, network processors, CPUs, GPUs, ICT, industrial, Internet of Things (IoT), railway and...

Read More »
Flex Power Modules Releases PKU4611A and PKU4617A DC-DC Converters which are Ideal for Low-Power Radio Frequency Power Amplifier
Electrical Equipment & Systems

Flex Power Modules Releases PKU4611A and PKU4617A DC-DC Converters which are Ideal for Low-Power Radio Frequency Power Amplifier

Design provides a relatively flat component landscape, which facilitates easy cooling within sealed box environments using thermal pads. Offers a wide output trim range, which is optimized for the needs of low-power radio designs. Well suited to small cell applications for in-building wireless access, and outdoor microwave equipment.

Read More »
New Flex Power Designer 3.0 from Flex Power Modules Features Thermal Modeling
Software

New Flex Power Designer 3.0 from Flex Power Modules Features Thermal Modeling

Flex Power Modules’ new Flex Power Designer software offers thermal behavior simulation in power system designs, with specified board properties including ambient temperature, copper thickness, and wind speed. The software provides graphs to show dependencies between multiple quantities as well as letting users see overviews of the system configuration and the power system’s efficiency. Other...

Read More »
New DC-DC Power Modules from Flex Power are Offered in Sealed and Encapsulated Packages
Controls & Controllers

New DC-DC Power Modules from Flex Power are Offered in Sealed and Encapsulated Packages

The DC-DC Power Modules are available with input voltage ranges of 9 to 36V, 18 to 36V, 9 to 75V, 18 to 75V, 43 to 160V and 66 to 160V and are suitable for applications such as process control, factory automation, robotics, alternative energy and smart grid. The encapsulated packaging of the modules ensure reliable operation when subjected to dust, moisture and severe vibration. They are offered...

Read More »
New PKJ7200 and PKJ7300 Power Modules Provide Output Voltages of 12V, 13.8V, 15V, 24V, 48V and 54V
Controls & Controllers

New PKJ7200 and PKJ7300 Power Modules Provide Output Voltages of 12V, 13.8V, 15V, 24V, 48V and 54V

Designed for demands of EN 50155 standard for railway applications including surge protection, power interruption/backup, wide operating temperature range and resistance to shock and vibration. Achieves high efficiency of up to 92% at full load reducing power dissipation. Handles harsh input voltage conditions to cope with brownouts and transients that can occur in railway rolling stock.

Read More »
New PMU8000 Series PoL Regulators Meet IEC/EN/UL62368-1 Standard
Controls & Controllers

New PMU8000 Series PoL Regulators Meet IEC/EN/UL62368-1 Standard

Features configurable soft start and loop optimization that enables design engineers to optimize load transient response for different capacitive loads. Comes in 7.5 x 7.5 x 5.4 mm package and offer high efficiency of typically 95.3 % which can be used in harsh conditions. Applications include FPGAs, ASICs, network processors, CPUs, GPUs, ICT, industrial, Internet of Things (IoT), railway and...

Read More »
Flex Power Modules Releases PKU4611A and PKU4617A DC-DC Converters which are Ideal for Low-Power Radio Frequency Power Amplifier
Electrical Equipment & Systems

Flex Power Modules Releases PKU4611A and PKU4617A DC-DC Converters which are Ideal for Low-Power Radio Frequency Power Amplifier

Design provides a relatively flat component landscape, which facilitates easy cooling within sealed box environments using thermal pads. Offers a wide output trim range, which is optimized for the needs of low-power radio designs. Well suited to small cell applications for in-building wireless access, and outdoor microwave equipment.

Read More »
New Flex Power Designer 3.0 from Flex Power Modules Features Thermal Modeling
Software

New Flex Power Designer 3.0 from Flex Power Modules Features Thermal Modeling

Flex Power Modules’ new Flex Power Designer software offers thermal behavior simulation in power system designs, with specified board properties including ambient temperature, copper thickness, and wind speed. The software provides graphs to show dependencies between multiple quantities as well as letting users see overviews of the system configuration and the power system’s efficiency. Other...

Read More »
New DC-DC Power Modules from Flex Power are Offered in Sealed and Encapsulated Packages
Controls & Controllers

New DC-DC Power Modules from Flex Power are Offered in Sealed and Encapsulated Packages

The DC-DC Power Modules are available with input voltage ranges of 9 to 36V, 18 to 36V, 9 to 75V, 18 to 75V, 43 to 160V and 66 to 160V and are suitable for applications such as process control, factory automation, robotics, alternative energy and smart grid. The encapsulated packaging of the modules ensure reliable operation when subjected to dust, moisture and severe vibration. They are offered...

Read More »

All Topics