Rogers Corporation

Materials

Laminate Materials offer rolled copper cladding options.

Combining smooth rolled copper with very low dielectric loss of PTFE-ceramic resin system, RO3003™, RO3035™, and RO3203™ are suitable for loss-critical millimeter wave frequency designs, where consistent circuit performance matters, such as automotive radar sensors and point-to-point microwave backhaul communications systems. RO3003 3.0 dielectric constant laminates are available with...

Read More »
Adhesives & Sealants

Urethane Foam Tape prevents window delamination.

Intended for OEMs that design and manufacture smartphones and tablets, PORON® Foam Tape offers solution for display bonding and impact protection. Product combines bond strength, compression set resistance, and dimensional stability to prevent window floating. In addition, tape delivers optimized water-sealing performance, passing RogersÂ- IPX7 simulation test under zero compression.

Read More »
Adhesives & Sealants

Rogers to Show Its Bisco Silicone Products for Rail Transport Applications at the 2011 Apta Show In New Orleans

Chicago, IL - The High Performance Foams Division of Rogers Corporation (NYSE: ROG) will be exhibiting its BISCO® MF-1(TM) seating materials and BISCO® L3 foams for use in rail transport flooring systems at the American Public Transportation Association (APTA) show to be held in New Orleans, LA, (Booth #5254), on October 3-5, 2011. Visitors to the Rogers booth at the APTA show can...

Read More »
Materials

Rogers Corporation Introduces Two New Members to the Poron ThinStik Family of Self-Adhesive Foams

Rogers, CT - As handheld devices decrease in size and increase in functionality, achieving the proper balance of sealing and protection with the requirements of an ultra thin application can be an extreme design challenge. To help address this growing need, Rogers Corporation has introduced two new members to the PORON® ThinStik(TM) family of foams: PORON ThinStik ShockSeal(TM) Foam:...

Read More »
Optics & Photonics

Rogers Corporation Uses Victrex APTIV® Film to Create Flexible, Adhesive-Less Laminates

WEST CONSHOHOCKEN, PA USA - Delamination caused by deteriorating adhesives that traditionally bond the layers of laminate structures can lead to premature product failure. Adhesives often deteriorate when exposed to high temperatures, moisture or chemicals. To solve this problem, Rogers Corporation, a manufacturer of high-end specialty materials, developed a proprietary technology to heat...

Read More »
Architectural & Civil Engineering Products

Rogers Corporation BISCO Silicone Materials to Be on Display at the Aircraft Interiors Expo in Hamburg, Germany

Carol Stream, IL - Rogers Corporation's High Performance Foams Division will be exhibiting its BISCO® silicone materials at the upcoming Aircraft Interiors Expo at the Hamburg Messe (Booth #6A40), April 5-7, 2011. BISCO® materials on display include the A2 Sound Barrier material, BF-1000 premium carpet padding, and the next generation development aircraft seating foam. Rogers will...

Read More »
Architectural & Civil Engineering Products

Rogers High Performance Foams Division to Highlight New Silicone Acoustic Barrier Product at the 2010 Aircraft Interiors Expo Americas

Wednesday, September 01, 2010 - Carol Stream, Illinois - Rogers Corporation's High Performance Foams Division will be exhibiting its new BISCO® A2 Sound Barrier silicone material at the upcoming Aircraft Interiors Expo Americas, in Long Beach, CA, September 14-16, 2010, Rogers booth # 958. The new BISCO A2 Sound Barrier has been designed to meet challenging aircraft standards for...

Read More »
Impact Protection Material is soft, lightweight, flexible.
Architectural & Civil Engineering Products

Impact Protection Material is soft, lightweight, flexible.

Suited for designers of outdoor apparel and sports equipment, PORON® XRD(TM) creates layer of wearable protection that absorbs more than 90% of energy upon repeated impact and will not constrict freedom of movement or range of motion. Material delivers shock absorption and protective cushioning and can be used in manufacture of helmets, safety boots, knee and elbow pads, chest protectors, and...

Read More »
Materials

Rogers High Performance Foams Division to Highlight Two Key Products at Sampe 2009

Wednesday, May 06, 2009 Rogers , CT - Rogers Corporation's High Performance Foams Division will be highlighting two key BISCO Silicone materials at the upcoming SAMPE (Society for Advancement of Material & Process Engineering) conference and exhibition, May 19-21, 2009, in Baltimore, MD. Rogers (Booth #1035) will be exhibiting its BISCO L3-A and HT-200 silicone materials in addition to its full...

Read More »
Materials

Silicone Foam suits passenger railcar flooring systems.

Featuring specific stiffness values and elasticity properties, BISCO L3-A provides vibration mitigation isolation under all travel conditions. It provides safety protection as mandated by various American and European safety standards, including both British and French fire protection standards. Exhibiting less than 1% compression set, low weight, low flame, and low smoke solution reduces need...

Read More »
Materials

Laminate Materials offer rolled copper cladding options.

Combining smooth rolled copper with very low dielectric loss of PTFE-ceramic resin system, RO3003™, RO3035™, and RO3203™ are suitable for loss-critical millimeter wave frequency designs, where consistent circuit performance matters, such as automotive radar sensors and point-to-point microwave backhaul communications systems. RO3003 3.0 dielectric constant laminates are available with...

Read More »
Adhesives & Sealants

Urethane Foam Tape prevents window delamination.

Intended for OEMs that design and manufacture smartphones and tablets, PORON® Foam Tape offers solution for display bonding and impact protection. Product combines bond strength, compression set resistance, and dimensional stability to prevent window floating. In addition, tape delivers optimized water-sealing performance, passing RogersÂ- IPX7 simulation test under zero compression.

Read More »
Adhesives & Sealants

Rogers to Show Its Bisco Silicone Products for Rail Transport Applications at the 2011 Apta Show In New Orleans

Chicago, IL - The High Performance Foams Division of Rogers Corporation (NYSE: ROG) will be exhibiting its BISCO® MF-1(TM) seating materials and BISCO® L3 foams for use in rail transport flooring systems at the American Public Transportation Association (APTA) show to be held in New Orleans, LA, (Booth #5254), on October 3-5, 2011. Visitors to the Rogers booth at the APTA show can...

Read More »
Materials

Rogers Corporation Introduces Two New Members to the Poron ThinStik Family of Self-Adhesive Foams

Rogers, CT - As handheld devices decrease in size and increase in functionality, achieving the proper balance of sealing and protection with the requirements of an ultra thin application can be an extreme design challenge. To help address this growing need, Rogers Corporation has introduced two new members to the PORON® ThinStik(TM) family of foams: PORON ThinStik ShockSeal(TM) Foam:...

Read More »
Optics & Photonics

Rogers Corporation Uses Victrex APTIV® Film to Create Flexible, Adhesive-Less Laminates

WEST CONSHOHOCKEN, PA USA - Delamination caused by deteriorating adhesives that traditionally bond the layers of laminate structures can lead to premature product failure. Adhesives often deteriorate when exposed to high temperatures, moisture or chemicals. To solve this problem, Rogers Corporation, a manufacturer of high-end specialty materials, developed a proprietary technology to heat...

Read More »
Architectural & Civil Engineering Products

Rogers Corporation BISCO Silicone Materials to Be on Display at the Aircraft Interiors Expo in Hamburg, Germany

Carol Stream, IL - Rogers Corporation's High Performance Foams Division will be exhibiting its BISCO® silicone materials at the upcoming Aircraft Interiors Expo at the Hamburg Messe (Booth #6A40), April 5-7, 2011. BISCO® materials on display include the A2 Sound Barrier material, BF-1000 premium carpet padding, and the next generation development aircraft seating foam. Rogers will...

Read More »
Company News

Rogers Corporation Launches New Career Center Outreach Via Social Media

Rogers, CT (January 28, 2011) - In a move to employ social media to assist career development for business and engineering professionals, Rogers Corporation has launched online communities on social media sites such as such as Facebook, Twitter, LinkedIn and YouTube. On these sites professionals can participate in conversations about career opportunities in the manufacturing and technology...

Read More »
Company News

Rogers Corporation's Power Distribution Systems Facility in China Awarded the European Railway Industry's IRIS Certification

Gent, Belgium - The Power Distribution Systems (PDS) Division of Rogers Corporation has been awarded IRIS (International Railway Industry Standard) certification for its laminated busbar manufacturing facility located in the Suzhou Industrial Park in Jiangsu Province, China. The Rogers PDS-China manufacturing facility is the first laminated busbar manufacturer in China to obtain IRIS...

Read More »
Architectural & Civil Engineering Products

Rogers High Performance Foams Division to Highlight New Silicone Acoustic Barrier Product at the 2010 Aircraft Interiors Expo Americas

Wednesday, September 01, 2010 - Carol Stream, Illinois - Rogers Corporation's High Performance Foams Division will be exhibiting its new BISCO® A2 Sound Barrier silicone material at the upcoming Aircraft Interiors Expo Americas, in Long Beach, CA, September 14-16, 2010, Rogers booth # 958. The new BISCO A2 Sound Barrier has been designed to meet challenging aircraft standards for...

Read More »
Company News

Rogers Issues New Brochure on Poron Urethane & Handheld Devices

Rogers, CT - Rogers Corporation along with Rogers INOAC Corporation has issued a new brochure on its PORON® Urethane solutions for use in handheld devices such as cell phones, PDAs, computers, digital cameras and gaming devices. Microcellular PORON Urethanes are used in gaskets and seals to protect sensitive components in handheld devices. They provide gap filling, shock absorption, dust...

Read More »

All Topics