Fisnar Inc.
Pine Brook, NJ 07058
Share:
Fisnar-® Inc. will be Demonstrating Latest Precision Fluid Dispensing Systems and Consumables at Booth 2959 - MD&M Expo - February 2014
WAYNE, NJ – FisnarÃ-® Inc., Booth 2959 – MD&M Expo – FisnarÃ-® Inc. can be located at Booth 2959 and will be demonstrating its latest precision fluid dispensing systems and consumables. Several examples of industrial robots are on show and include gantry, cantilever and desktop models. Metering & mixing systems for dual part fluids will be presented including the latest advances in...
Read More »
I&J Fisnar Inc. JB1113-LF Liquid Dispenser RoHS Approved
I&J Fisnar Inc. claim that the JB1113-LF is the number one dispenser used throughout the world. The USA made JB1113-LF now conforms to RoHS requirements. High volume manufacturing passes on significant cost savings to I&J Fisnar Inc. clients placing the JB1113-LF liquid dispenser in a cost and performance class of its own. Features include timed pulse shot and continuous mode operation. Regulated...
Read More »
Cartridge Valve dispenses adhesives and silicones.
Weighing 4.8 oz, Model CV629 can be comfortably held in hand without stress and is suited for manual operations where operator needs to apply frequent dispensing deposits. Stroke is adjustable and maximum fluid pressure is 300 dpi. Recommended for micro shots or fine beads, valve can be integrated into automated system, where one-piece cartridge seal ensures minimal maintenance.
Read More »
Needle Valve is designed for dispensing anaerobic resin.
Model MV-0180-PNM is designed with plastic wetted chamber so that anaerobic resin does not come into contact with metal body of valve. Under pressure, material is fed to valve directly from its packaged container. Air pulse is delivered from valve controller, actuating solenoid attached to needle seal and allowing fluid to flow. When air pulse is removed, forward action spring returns needle and...
Read More »
Diaphragm Action Valve works with UV resins and adhesives.
Suited for dispensing applications, Model DV509-UV-LF features wetted chamber compatible with low- to medium-viscosity UV materials. Diaphragm seal is attached to solenoid that opens upon receiving air signal from valve controller. Diaphragm flexes to allow fluid to exit for duration that seal is opened, and return spring snaps diaphragm shut after air signal is removed. Valve is rated at 200...
Read More »
I&J7400C Dispensing Robot - Selective Coating Avoids Contamination
A proven method of automatically applying conformal coating to PCB areas surrounding contacts that may be sensitive to possible spray contamination, is to use an I&J Fisnar Inc. Dispensing Robot complete with a brush applicator and suitable valve system. I&J Fisnar Inc. state that trials for an in-flight PCB Conformal Coating application proved that applying the coating material by a robot...
Read More »
Air-Controlled Dispensers handle wide range of liquids.
Offering manual, timed, and cycle modes of operation, air-controlled dispenser Model SL101 provides 10 memory positions for optimal control over dispensing process. CE certified, RoHS compliant unit is available in 110 and 220 V versions and can be used with watery liquids such as cyanoacrylates as well as with heavy greases. Equipped with suck-back control to help prevent drips, unit also comes...
Read More »
Mini Spool Valve is designed for low-high viscosity fluids.
Model VMS400 dispenses RTV/Silicones, Solder Pastes and Masks, Sealants, and UV Adhesive with up to 700 lb fluid pressure. Suck-back helps adjust fluid cut-off at end of cycle, while UHMW-PE seals separate wetted materials from pneumatic movement. With minimum shot size of 0.1 cc, valve can cycle up to 400/min using 4-way controller. Device suits applications requiring precision and repeatability...
Read More »
Mini Spool Valve dispenses low- to high-viscosity fuids.
Able to handle up to 700 lb of fluid pressure, Model VMS400 has adjustable Suck-Back so that fluid cutoff at end of cycle can be finely adjusted. Unit features minimum shot size of 0.1 cc and can cycle up to 400/min using 4-way valve controller. Wetted materials are separated from pneumatic movement by UHMW-PE seals. Valve is suitable for use with RTV/silicones, solder pastes and masks, sealants,...
Read More »
Air Free Barrel Loaders
March 15, 2006 Filling syringes and barrels from bulk containers is a messy and often wasteful process, but it is a necessity if the material is to be used in smaller volumes or distributed among multiple users. I&J Fisnar Inc. can assist in making this job easier by providing a selection of Barrel Loaders which efficiently transfer the material to a syringe. Barrel Loaders are available for...
Read More »
Fisnar-® Inc. will be Demonstrating Latest Precision Fluid Dispensing Systems and Consumables at Booth 2959 - MD&M Expo - February 2014
WAYNE, NJ – FisnarÃ-® Inc., Booth 2959 – MD&M Expo – FisnarÃ-® Inc. can be located at Booth 2959 and will be demonstrating its latest precision fluid dispensing systems and consumables. Several examples of industrial robots are on show and include gantry, cantilever and desktop models. Metering & mixing systems for dual part fluids will be presented including the latest advances in...
Read More »Fisnar Inc. Announces New Hot Melt Equipment Brochure
WAYNE, NJ – Fisnar Inc., THERMADOSEÃ-® Hot Melt dispensing systems provide the ultimate in pulse-free temperature controlled thermoplastic dispensing for industrial applications using pressure sensitive adhesives, contact adhesives, waxes and sealants. THERMADOSEÃ-® tanks are TeflonÃ-® coated reducing char buildup for easy maintenance and reliable operation. Tank controllers can be...
Read More »Visit Fisnar Inc. at Booth 2807 - IPC APEX Expo - February 2013
Fisnar Inc. will be showcasing at the IPC APEX Expo, the premier electronics industry conference and exhibition, in San Diego this February. Fisnar can be located at Booth 2807 and will be presenting a broad range of their cutting edge dispensing products and systems. Several examples of industrial robots will be demonstrated on site, including gantry and desktop models. Metering & mixing systems...
Read More »Fisnar Introduces FreeTrial Service
WAYNE, NJ - FisnarÃ-® Inc., is pleased to announce their newest business development, Free Video Trials. FisnarÃ-® Inc. is a leader in fluid dispensing and dispensing automation systems, offering application solutions for adhesives, glue, cyanoacrylates, silicone, RTV, anaerobic resin, epoxy, UV cure formulations and more. FisnarÃ-®'s new service provides an opportunity for customers...
Read More »Renewable Energy Brochure Launches SOLARPREP(TM) Program from Fisnar Inc.
WAYNE, NJ - June, 2011 - Fisnar is pleased to announce a new brochure launching a Renewable Energy Equipment Program with a trademark of SOLARPREP(TM). The brochure introduces current renewable energy technologies and Fisnar's manufacturing solutions, from simple modular automation to full-factory systems. The brochure can also be helpful as an introduction to renewable energy technology...
Read More »Fisnar Announces New Managing Director, Fisnar Asia
WAYNE, NJ - March, 2011 - FisnarÃ-®, is pleased to announce the addition of Eric Choi to Ellsworth Corporation as Managing Director, Fisnar Asia. In his new role, Eric will concentrate on consolidating and growing Fisnar business in Asia and to establish Fisnar Asia as the supply hub for Fisnar globally. According to James Dornan, Managing Director responsible for Fisnar global operations,...
Read More »Fisnar Celebrates 25 Years
WAYNE, NJ - February, 2011 - FisnarÃ-®, is proud to announce its silver jubilee - culminating in 25 years of supplying dispensing solutions to a global community. Fisnar commenced operations in 1986. Headquartered in Fair Lawn NJ USA, the company quickly expanded and opened offices in Europe and Asia, designing and supplying dispensing automation and consumables to a wide variety of...
Read More »Three Changes for I&J Fisnar Inc.
They say good things come in three's and I&J Fisnar Inc has certainly followed the rule with three major changes this autumn. The first is a new logo launching a new direction in dispensing automation. The memorable logo has been designed to strongly enforce motion and fluid, both representing salient features for the logo's second line - The Art of Dispensing. October 1st saw the company change...
Read More »
New Rental Service from I&J Fisnar Inc
I&J Fisnar Inc is pleased to announce its next positive and progressive move to strengthen its business by introducing a new rental service for all I&J Fisnar Robot systems. This new service will allow companies that have an urgent need for automation, but no short term capital expenditure plans, the ability to acquire a much needed production tool that they may not have been able to afford...
Read More »
I&J Fisnar Inc. JB1113-LF Liquid Dispenser RoHS Approved
I&J Fisnar Inc. claim that the JB1113-LF is the number one dispenser used throughout the world. The USA made JB1113-LF now conforms to RoHS requirements. High volume manufacturing passes on significant cost savings to I&J Fisnar Inc. clients placing the JB1113-LF liquid dispenser in a cost and performance class of its own. Features include timed pulse shot and continuous mode operation. Regulated...
Read More »