Absopulse Electronics Ltd
Clayton, ON K0A1L0 CAN
2kVA, Frequency Converter Delivers Clean Sine-wave Voltage for Generator Powered Control Circuitry and Instrumentation
The FC 2KP-EW/A modular ac-ac frequency converter system was designed to deliver a clean sine-wave output from dirty generator voltage under extreme environmental conditions. This 2kVA system converts a wide range varying generator voltage of 180V - 270Vac with a frequency range of 35 -70Hz, to a stable 120Vac at 60Hz, which is required to run control circuitry and instrumentation in earthmoving...
Read More »
AC/AC Frequency Converter delivers stable voltage in equipment.
Providing sine-wave output from generator voltage, 2 kVA, FC 2KP-EW/A Series modular AC/AC frequency converter changes 180-270 Vac voltage at 35-70 Hz to 120 Vac at 60 Hz for earthmoving equipment. Product includes AC-DC and DC-AC sub-systems, each housed in separate enclosure, mounted on 508 x 69 x 914 mm base-plate attached to heat sink. Protection includes 2,250 Vdc input to chassis/output...
Read More »
DC-DC Converters suit solar power applications.
With universal input range of 90–350 Vdc, PFD 120 Series employs dual conversion topology to deliver up to 120 W output power. Converters provide tightly regulated, isolated outputs of 12, 24, 48, 110, or 125 Vdc. Built-in redundancy diode allows for parallel and N+1 operations, or connection to back-up battery. Housed in 114 x 51 x 201 mm chassis-mount enclosure, converters feature 4,300 Vdc...
Read More »
DC/DC Industrial Converters deliver 1,000 W continuous output.
Available with 48, 72, 110, or 125 Vdc inputs, BAP 65TF/65F Series delivers output voltages of 24 V/40 A, 48 V/20 A, or 125 V/8 A. Built-in redundancy diode can be added for paralleling and N+1 operation, or back-up battery connection. Output ripple/noise is less than 1% of output voltage peak-to-peak and combined line/load regulation is less than -
Read More »
AC/DC Power Supplies provide wide output adjustability.
Available in 3U x 15 x 12 in. benchtop model and 3U x 19 x 12 in. rackmount version, fan-cooled LPS 3K Series accepts universal AC input voltage of 95–264 Vac and uses internal modules for output ranges of 14–37 V at 80 A, 28–74 V at 40 A, or 60–160 V at 18 A. Output voltage adjustments are made via potentiometer knob, and power factor is corrected to minimum of 0.97 at full load for...
Read More »
DC/DC Converters mount to uneven and non-conductive surfaces.
Supplied in 113 x 115 x 261 mm, chassis-mount enclosures, BAP 236TH Series generate up to 250 W and are cooled by heat-sink fins on top of units; no fans- or attachment to- heat-sinking surface are required. Converters operate from 24 V (21–30 V), 48 V (42–60 V), or 125 V (105–145 V) input and provide tightly regulated outputs of 24, 48, or 125 Vdc. Efficiency is 85% at full load,...
Read More »
Rack-Mount Power System supports 3 hot-pluggable 1.5 kW modules.
Able to deliver 4.5 or 3 kW with N+1 redundancy, PFC 4K5-3U19 Series comprises modular, rack-mount AC/DC power supply systems with PFC input. Each 4.5 kW system is built with 3 heavy-duty, hot-pluggable, 1.5 W (PFC 1K5) power supply modules on 3U x 19 in., rack-mount, stainless steel cradle. Accepting universal input from 95-264 Vac, 1.5 kW modules are available in output configurations that...
Read More »
AC/DC Switch Mode Power Supplies suit railway environments.
Operating from 115 or 230 Vac input, POL 400R Series delivers 12, 24, 36, 48, or 110 Vdc with efficiency from 80-90%, depending on configuration. Units include 3,000 Vdc input/output isolation, overload protection, and current limiting. Housed in 131 x 66 x 232 mm enclosures, 400 W power supplies are conduction cooled and operate in -40 to +70-
Read More »
DC/DC Converters suit railway and other extreme environments.
Housed in 113 x 60 x 200 mm enclosure, RWY 252H Series has 2 fully independent, regulated isolated output stages, each providing any single voltage between 5-110 Vdc. Output V1 has 140 W power capacity, while output V2 offers 110 W capacity. Nominal input voltages are 24, 36, 48, 72, 96, or 110 Vdc with EN50155 input ranges. Depending on input/output configuration, efficiency is typically 85% at...
Read More »
Convection Cooled DC/DC Converter delivers up to 1 kW power.
Supplied 7 x 7 x 12 in., chassis-mount enclosure, BAP 1K-U7712 Series does not require any fans or forced air cooling. Each model contains 2 internal modules, each capable of generating 500 W min for inherent redundancy. Products may be connected in parallel, and version with 2 independent, fully regulated outputs of 500 W each is also possible. Inputs range from 48-250 Vdc, regulated outputs...
Read More »