Warner Electric
Columbia City, IN 46725
Clutch/Brake Modules feature electromagnetic operation.
With internal component mounting and external housing fin design, Gen 2 Clutch/Brake Modules feature optimal heat dissipation and stop/start frequencies, particularly in enclosed configurations. Input-to-output axis alignment minimizes vibration, noise, and wear, while integrated mounting bolts facilitate installation and allow conduit box to be located directly on top of unit. Modules are suited...
Read More »Brake Module features improved C-face technology.
Gen 2 Packaged Electromagnetic Clutch/Brake module features improved internal component mounting and external housing fin design for heat dissipation that optimzes stop/start frequencies. Input-to-output axis alignment reduces vibration, noise, and wear. With custom mounted bolts, conduit box is located on top of unit for consistent orientation. Available in sizes 50, 100, and 180, modules also...
Read More »Linear Guideways incorporate recirculation system.
Combining lube-retaining end caps and sealed bearing blocks, Linear Guideways feature minimized friction for quiet operation. End seals, available with optional double seals and scrapers, offer added protection from contamination. Series ATH is designed for heaviest loads, while Series ATE offers interchangeable block and is suited for precision measuring equipment. Series ATM combines miniature...
Read More »Linear Actuators carry loads up to 1,330 lb.
Comprised of 4 models, A-Track Series incorporates round, ground ball nut as well as motor shaft supported by bearings that are designed to increase transition consistency and life characteristics of ball bearings. Series also offers limit switch and potentiometer options. Weatherproofed products can be located in confined areas and are capable of moving loads from 25-1,330 lb.
Read More »Clutch/Brake Modules require no maintenance.
Electromagnetic Smooth-Start UniModules provide consistent, smooth starting and stopping throughout entire torque range. Units are NEMA C-face compatible and automatically adjust for wear. They can be paired with CBC-300 clutch/brake control, which allows clutch and brake torque levels to be set independently. Once torque levels are set, control's circuitry supplies constant current to...
Read More »Clutch/Brakes withstand washdown applications.
BISSC certified Washdown Electro Pack Clutch/Brakes are enclosed in compact, sealed, washdown-ready package. Protected with USDA-approved coating, they feature smooth exterior that prevents food particles and bacteria from lodging and propagating. Constructed with shielded, sealed bearings and stainless steel shafting, clutch/brakes are suited for use in sanitary, food, and any other washdown...
Read More »Electric Safety Hinge Switch meets IP67 specifications.
Available in 250 Vac/dc or 60 Vdc versions, Warner Safety Hinge Switch offers internally mounted, tamper-resistant safety contact. Hinge-operating angle is 0 to 180Ã-
Read More »Electromagnetic Coils provide precise control.
Alcoils freestanding/bobbin coils are precision/random-wound with bondable magnet wire to achieve required electrical characteristics in optimal space. Available in standard or custom sizes in various plastic materials, coils can be finished with pin or insulation displacement terminals. They can also be encapsulated with thermoplastics for moisture-, corrosion-, chemical-, and...
Read More »Clutch/Brakes start/stop loads to 1/2 deg per revolution.
CB Series Wrap Spring clutch/brakes, in 5 sizes, have rated static torque ranging from 25 to 2500 lb.in. and 1800 to 300 RPM maximum operating speed. Super CB Series, in 3 standard sizes, has rated static torque from 250 to 2500 lb.in. and 750 to 300 RPM maximum operating speed. Three models of WSC Series clutches are available in 5 sizes with rated static torque from 25 to 2500 lb.in. and 1800...
Read More »Spring Set Brakes hold loads when power fails.
ERD Series electrically-released, spring set brakes perform dynamic stopping and fail-safe, power-off braking to hold loads in event of electrical outage. Brakes are available in 8 sizes, from 3.3 to 9.9 in. dia with torque capacities from 4 to 220 lb ft. Brakes permit stopping and holding in both directions, and can stop loads from motor speeds up to 3600 rpm. Applications include hoists,...
Read More »Clutch/Brake Modules feature electromagnetic operation.
With internal component mounting and external housing fin design, Gen 2 Clutch/Brake Modules feature optimal heat dissipation and stop/start frequencies, particularly in enclosed configurations. Input-to-output axis alignment minimizes vibration, noise, and wear, while integrated mounting bolts facilitate installation and allow conduit box to be located directly on top of unit. Modules are suited...
Read More »Warner Electric Publishes Gen 2 Clutch/Brake Catalog
March 3, 2008 - South Beloit, IL - Warner Electric, an Altra Industrial Motion company, has published a 66-page catalog for its new line of Packaged Electromagnetic Clutches/Brakes, including the new Gen 2 modules. The catalog includes complete ordering information for the following Gen 2 models, each of which directly replace original C-Face models in sizes 50, 100, and 180: UniModules (UM...
Read More »Brake Module features improved C-face technology.
Gen 2 Packaged Electromagnetic Clutch/Brake module features improved internal component mounting and external housing fin design for heat dissipation that optimzes stop/start frequencies. Input-to-output axis alignment reduces vibration, noise, and wear. With custom mounted bolts, conduit box is located on top of unit for consistent orientation. Available in sizes 50, 100, and 180, modules also...
Read More »Warner Electric Publishes Updated Guide to Precision Tork(TM) Products
February 9, 2007 - South Beloit, IL - Warner Electric has published a comprehensive update to its 24-page catalog of Precision Tork(TM) products. A complete line of magnetic capping headsets that directly interchange with many major capping OEM machines has been added to the Precision Tork(TM) line of permanent magnet and magnetic particle clutches and brakes. Also new are stainless steel...
Read More »Linear Guideways incorporate recirculation system.
Combining lube-retaining end caps and sealed bearing blocks, Linear Guideways feature minimized friction for quiet operation. End seals, available with optional double seals and scrapers, offer added protection from contamination. Series ATH is designed for heaviest loads, while Series ATE offers interchangeable block and is suited for precision measuring equipment. Series ATM combines miniature...
Read More »New Brochure on A-Track Series Linear Actuators from Warner Electric
June 2, 2006 - South Beloit, IL - Warner Electric has published a new eight-page, full-color brochure to introduce new A-Track Series Linear Actuators - a four-model series of lightweight, economical actuators that are easy install and provide quiet, maintenance-free operation. The A-Track Series incorporates many new design features that add strength and reliability. Ball bearing screws, instead...
Read More »Linear Actuators carry loads up to 1,330 lb.
Comprised of 4 models, A-Track Series incorporates round, ground ball nut as well as motor shaft supported by bearings that are designed to increase transition consistency and life characteristics of ball bearings. Series also offers limit switch and potentiometer options. Weatherproofed products can be located in confined areas and are capable of moving loads from 25-1,330 lb.
Read More »Clutch/Brake Modules require no maintenance.
Electromagnetic Smooth-Start UniModules provide consistent, smooth starting and stopping throughout entire torque range. Units are NEMA C-face compatible and automatically adjust for wear. They can be paired with CBC-300 clutch/brake control, which allows clutch and brake torque levels to be set independently. Once torque levels are set, control's circuitry supplies constant current to...
Read More »Clutch/Brakes withstand washdown applications.
BISSC certified Washdown Electro Pack Clutch/Brakes are enclosed in compact, sealed, washdown-ready package. Protected with USDA-approved coating, they feature smooth exterior that prevents food particles and bacteria from lodging and propagating. Constructed with shielded, sealed bearings and stainless steel shafting, clutch/brakes are suited for use in sanitary, food, and any other washdown...
Read More »Electric Safety Hinge Switch meets IP67 specifications.
Available in 250 Vac/dc or 60 Vdc versions, Warner Safety Hinge Switch offers internally mounted, tamper-resistant safety contact. Hinge-operating angle is 0 to 180Ã-
Read More »