Wabash MPI Carver
PO Box 298
Wabash, IN 46992
Wabash and Carver at JEC Europe 2013
Wabash MPI and Carver, Inc. are exhibiting at JEC Europe 2013 in Booth No. Z73 in Paris, France from March 12-14. Wabash and Carver are leading manufacturers of presses for the composites industry with press capacities ranging from .5 to 1200 tons and platen sizes from 6 X 6 to 6' X 12'. The booth for Wabash and Carver is located beside The Demo Zone where a Wabash G100 press will be part of a...
Read More »Compression Presses offer continuous operation.
Suited for clean room and laboratory applications, E-Series features microprocessor-based programmable control of all press functions, as well as programmable heating and cooling. Integral load cell delivers force feedback to PLC, providing programmable pressure ramping capability. All electric power/drive system provides accurate ramping of clamp force from 1,000 lb to 30 tons. Standard...
Read More »
Hydraulic Compression Press has 1,000 ton max clamp force.
Model 1000-36X features programmable control of clamp position, closed loop control of clamp force from 10-1,000 tons, and fully programmable compression and decompression rates throughout force range. PLC control provides for recipe storage as well as remote communication capabilities. Machine's 36 x 36 in. work area can be equipped with heated platens, and 4 tie rod design assures minimal...
Read More »
Compression Press suits Class 5 ASTM test sample molding.
Meeting requirements for molding test plaques in Class 5 polyethylene materials, Model G30H-12-ASTM Genesis hydraulic compression press has electrically heated 12 x 12 in. platens designed for automatic cooling with closed-loop water or air-cooled chiller systems. Integral hydraulic system provides adjustable clamp force up to 30 tons, while programmable controls direct press functions and...
Read More »
Compression Molding Press is suited for cleanroom use.
Bench-top Model PS3H-8-CLX features precision control of clamp force via proportional pneumatic pressure control system. Integral vacuum chamber has 8 x 8 in., electrically heated (up to 650Ã-
Read More »
Molding Press compresses composite materials.
This 400 ton, down acting hydraulic compression molding press has 120 x 60 in. platens that are electrically heated with additional zones to assure temperature uniformity. It has integral hydraulic system, programmable control system, adjustable pressing speed, automatic bump cycle and audible alarm for cure cycle end. Press has reinforced moving bolster for rigidity and stability, fast close...
Read More »Press Release for Our Client Wabash MPI Receives IMA Hall of Fame Award
Wabash MPI Carver receives IMA Hall of Fame Award The Indiana Manufacturers Association (IMA) held its 2018 Indiana Manufacturers Hall of Fame Luncheon on October 24, 2018, at the Biltwell Event Center in Indianapolis. The goal of the Indiana Manufacturers Hall of Fame is to celebrate and recognize the positive achievements made by Indiana manufacturing companies, and to honor their...
Read More »New Vantage Series Vacuum Presses Literature
Wabash MPI offers new literature featuring its Vantage Series Vacuum chamber molding and laminating presses. The literature provides standard Vantage press specifications, as well as available optional features and control system options. A chart details the complete line of Vantage Series presses and includes specifications for each model including clamp force, cylinder and stroke; platen size,...
Read More »Literature Features Wabash Genesis and Vantage Series Transfer Molding Press
New literature featuring the Genesis and Vantage Series Transfer Molding Presses is available from Wabash MPI. The literature provides the standard and optional features available for these presses, which range from 30 to 350-ton capacities. A chart details the complete line of Genesis and Vantage Series transfer molding presses and includes specifications for each model including clamp force,...
Read More »New Literature Features Vantage Series Presses
New literature is available from Wabash MPI, featuring its Vantage Series presses. The literature provides the standard Vantage press features, available optional features and control system features. A chart details the complete line of Vantage Series presses and includes specifications for each model including clamp force, cylinder and stroke; platen size, dimensions and current draw. Several...
Read More »Facility Expansion for Wabash and Carver
Wabash MPI and Carver, Inc. are proud to announce the completion of a recent expansion to their Wabash, IN facility in response to continued growth. This 5,000 square foot expansion includes new warehouse and service areas which allow for re-organization of the companies’ current space for new offices, increased manufacturing capacities and improved efficiency for Wabash and Carver’s...
Read More »
Wabash and Carver at JEC Europe 2013
Wabash MPI and Carver, Inc. are exhibiting at JEC Europe 2013 in Booth No. Z73 in Paris, France from March 12-14. Wabash and Carver are leading manufacturers of presses for the composites industry with press capacities ranging from .5 to 1200 tons and platen sizes from 6 X 6 to 6' X 12'. The booth for Wabash and Carver is located beside The Demo Zone where a Wabash G100 press will be part of a...
Read More »ACS Group Open House and Press Day
Wabash MPI and Carver, Inc. will be participating in the ACS Group Open House and Press Day on April 27, 2011 at the group's manufacturing facility in New Berlin, WI. Presentations will be made during the day offering information on ACS's plans for 2011 and new products. Dave Singer, Marketing Manger for Wabash and Carver, will also be presenting information on Carver's AUTO Series Press...
Read More »Singer Appointed Marketing Manager at Wabash and Carver
Wabash MPI and Carver, Inc. announce the appointment of Dave Singer as Marketing Manager for both companies. Singer has served in many roles within the two companies from 1983 to April of 2009. Wabash is a leading manufacturer and supplier of standard and custom laboratory presses for composite applications, including composite molding, compression molding, transfer molding, vacuum molding,...
Read More »Wabash Attending Rubber Mini Expo
Wabash MPI will be exhibiting at the Rubber Mini Expo at Kentucky International Convention Center from October 14-16, 2008 in Booth No. 433. Wabash is a leading international manufacturer and supplier of standard and custom presses. The full line of Wabash presses will be highlighted including hydraulic transfer presses. The transfer presses are ideal for medical gum stock silicone applications...
Read More »New Website For Wabash MPI
Wabash, IN - Wabash MPI announces their updated website, www.wabashmpi.com. This new site features an updated look and design, updated product information on Wabash standard and custom hydraulic presses and the latest company news. Information is also available about the all electric E-Series Compression Press, which is designed for around-the-clock performance in a lab, clean room or on the...
Read More »