Valcor Engineering Corporation

Fluid & Gas Flow Equipment

Valcor's High Flow, High Pressure V80000 Solenoid Valve

Valcor Series 80000 valves are designed for high flow, medium to high pressure systems. In their standard configuration, they are suitable for noncorrosive oil, fuel, water service and gases. In other configurations, with the incorporation of appropriate materials, they can also be adapted to corrosive service, and to high or low temperature applications. As with other Valcor solenoid valves, the...

Read More »
Fluid & Gas Flow Equipment

Flow Control Valve targets liquid CO2 applications.

Designed to handle liquid carbon dioxide, SV91 Series features all-welded, leak-tight stainless steel construction with straight-thru flow path. Direct-acting shear seal design ensures positive shifting and sealing. Available in 2 versions rated at 350 and 1,000 psi, solenoid valve is suited for use in fog producing systems, food processing, chillers, and other temperature control devices.

Read More »
Fluid & Gas Flow Equipment

Valves resist corrosion, contamination, and clogging.

Diaphragm Isolated Solenoid Valves Series SV 51 and SV 73 use flexible diaphragms to isolate operating parts from fluid being handled, eliminating metal-to-fluid contact. Available in 2-way NC and NO as well as 3-way configurations, seal materials include Viton, EPDM and Teflon®. Standard voltages are 24 Vdc and 115 Vac/60 Hz, while pressures range from vacuum to 100 psi and flow rates up...

Read More »
Stepper/Servo Brake is front-end mounted.
Mechanical Power Transmission

Stepper/Servo Brake is front-end mounted.

FEB failsafe, power-off brake is specifically designed to be mounted on front end of stepper or servo motors as added safety feature for holding load in place. Brake holds load like parking brake or can be designed to stop load when power is shut off. Available in NEMA 23 and NEMA 34 sizes, FEB features maximum speed of 8,000 rpm. Attached to stepper or servo motor by bolting on or plugging in,...

Read More »
Brake plugs into servo and stepper motors.
Mechanical Power Transmission

Brake plugs into servo and stepper motors.

Fail-safe Series SSB incorporates zero-backlash, permanent-magnet brake and torsionally rigid coupling to accept misalignment. Dual bearings allow greater overhung loads created by drive-belt pulleys, chain sprockets, and gearheads. Brake is available in 6 models, for NEMA 23, 34, and 42 sizes. Applications include robotics, linear, and rotary actuators, multi-axis positioning tables, material...

Read More »
Solenoid Pumps meter and dispense liquids.
Fluid & Gas Flow Equipment

Solenoid Pumps meter and dispense liquids.

SV500 Series is self-priming, can start from dry condition, and can lift up to 6 ft of water. Model SV500 has output range of 100 to 1500 microliters per dispense; SV515 outputs 3 to 15 microliters; SV525 outputs 10 to 40 microliters; and SV560 outputs 50 to 350 microliters per dispense. Pumps can operate up to 1,000,000 cycles without maintenance, and handle most semi- and non-corrosive fluids.

Read More »
Dispensing Pumps handle aggressive media applications.
Fluid & Gas Flow Equipment

Dispensing Pumps handle aggressive media applications.

SV600 Series dispensing pumps, utilizing Dri-Solenoid concept, isolate fluids from all metal parts making them suitable for dispensing corrosive and high purity fluids. Repeatability is within 2%. Users can mechanically set volume-per-stroke output, and control flow rate by rate of cycling. Pumps are available with choice of elastomeric seal materials, mounting configurations, inlet/outlet...

Read More »
Front End Brakes offer IP65 protection.
Mechanical Power Transmission

Front End Brakes offer IP65 protection.

Available for NEMA 23 and 34 sizes and designed specifically to plug in to Stepper or Servo Motors, SSB Series incorporates zero backlash permanent magnet brake and torsionally rigid coupling to accept misalignment. Brakes are also available in NEMA 42 size offering IP65 splashproof and dustproof protection. All 6 models include dual preloaded sealed bearings and black anodized aluminum housing.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers