TRAK Microwave Corporation

25W Ku-Band High Power Transceiver offers complete airborne Satcom solution.
Communication Systems & Equipment

25W Ku-Band High Power Transceiver offers complete airborne Satcom solution.

Integrating GaN SSPA, upconverters, downconverters and digital control technology, 25W Ku-Band High Power Transceiver features optional vibration insensitive OCXO. With built-in SSPA protection against high VSWR loads, 25W HPT transmits from 13.75 to 14.5GHz from 950 to 1700MHz IF frequency with < 1.0 dB gain variation over 36MHz band. Providing frequency block down conversion from 10.7 to...

Read More »
8835 GPS Clock offers less than 1x10-12 frequency accuracy.
Timers & Clocks

8835 GPS Clock offers less than 1x10-12 frequency accuracy.

Operating at -30°C to +60°C temperature range with TNC GPS receiver port, 8835 GPS Clock provides 1 PPS accuracy with less than 50 nanoseconds RMS. Featuring 10/100 base-T Ethernet interface, unit leverages NTP, SNMP, Telnet, SSH, and FTP network protocols for status and control. Operated with 24 VDC, 48 VDC, or 100-240 VAC power source, unit is suitable for defense, SatCom, and wireless...

Read More »
C-Band Circulator allows output tuning to desired voltage/power levels.
Communication Systems & Equipment

C-Band Circulator allows output tuning to desired voltage/power levels.

Integrating 75watts CW forward and reverse power detectors, 4-ported and ferrite-based C-band Circulator offers radar and communications system designers unique solution to enhance signal clarity. Including low insertion loss of 0.4 dB, circulator comes with minimum isolation of 20dB. Featuring VSWR of 1.25:1, unit is housed in aluminum body weighing 5-ounces. Device includes detection...

Read More »
8461 NTP Server offers 10/100 Base-T Ethernet interfacing.
Computer Hardware & Peripherals

8461 NTP Server offers 10/100 Base-T Ethernet interfacing.

Using optical IRIG-B DC-level shift or Wireline Modulated IRIG-B link with on-board OCXO holdover oscillator, 8461 NTP Server helps to provide critical time synchronization bridge to Isolated Network Domains. Operating with IRIG-B122 or IRIG-B126 time code, unit uses 50 Ohm single-ended BNC RF cable and offers 2:1 to 6:1 modulation ratio. Suitable for defense, SatCom, and wireless applications,...

Read More »
X-band Direct Synthesizer/Upconverter SYN152 features LVTTL switching of 50 ns.
Electronic Components & Devices

X-band Direct Synthesizer/Upconverter SYN152 features LVTTL switching of 50 ns.

Suitable for airborne environments, SSMP- and SMP-connected lightweight SYN152 operates from -40o C to +85o C. Featuring four x2, x3, x4, and x17 multiplied output ports with various powers in either the L-, S-, or X-bands as well as a X-band BIT detector, unit comes with UHF input power at -6 dBm. Synthesizer can output 0 dBm in the S-band, 2 dBm in the X3 L-band, 4 dBm in the X2 L-band, and 10...

Read More »
TRUE Surface Mount Circulators for Radar Highlight TRAK's Latest Microwave Innovations on Display at EDI-Con 2016
Communication Systems & Equipment

TRUE Surface Mount Circulators for Radar Highlight TRAK's Latest Microwave Innovations on Display at EDI-Con 2016

September 16, 2016Â- - Smiths Microwave Subsystems is pleased to announce that advanced surface mount technology has led TRAK to deliver the first-ever circulator that can be used in automated assembly of phased array radar assemblies. You’ll find this product and several other microwave component and assembly innovations on display at the Smiths Microwave Subsystems Booth #721 at EDI-Con...

Read More »
Time and Frequency System features internal GPS receiver.
Electronic Components & Devices

Time and Frequency System features internal GPS receiver.

Housed in ruggedized enclosure, tactical 8836 Series integrates ground-based GPS receiver module, rubidium oscillator, time and frequency signal generation, and control/status circuitry. Standard outputs include 1 PPS, low noise 10 MHz Network Time Protocol, and two IRIG B outputs over multi-mode fiber. When tracking GPS with TFOM of 3 or better, discipline algorithm steers internal oscillator...

Read More »
Latching Circulator-Isolator offers 1 µs switching speed.
Electrical Equipment & Systems

Latching Circulator-Isolator offers 1 µs switching speed.

CoveringÂ- bandwidths across 16–35 GHz range, Ka-Band Dual-Junction Latching Circulator-Isolator is suitable for satellite communications links, commercial aviation systems, missile systems, and other high-rel aerospace applications. Unit offers low insertion loss of 0.2 dB in transmit mode and 0.4 dB in receive mode. Device will handle +39 dBm transmit power with 25 dB isolation to...

Read More »
Next-Gen TX, RX, and Timing Modules by TRAK at IMS 2015
Controls & Controllers

Next-Gen TX, RX, and Timing Modules by TRAK at IMS 2015

TRAK Microwave has chosen IMS 2015 in Phoenix to announce the availability of several new aerospace and SATCOM communication system subassemblies and precision network timing products. These new products demonstrate the latest size, weight, and performance (SWaP) requirements for integrated multi-function assemblies and synchronization in both civilian and military communications. Ku-Band Block...

Read More »
25W Ku-Band High Power Transceiver offers complete airborne Satcom solution.
Communication Systems & Equipment

25W Ku-Band High Power Transceiver offers complete airborne Satcom solution.

Integrating GaN SSPA, upconverters, downconverters and digital control technology, 25W Ku-Band High Power Transceiver features optional vibration insensitive OCXO. With built-in SSPA protection against high VSWR loads, 25W HPT transmits from 13.75 to 14.5GHz from 950 to 1700MHz IF frequency with < 1.0 dB gain variation over 36MHz band. Providing frequency block down conversion from 10.7 to...

Read More »
8835 GPS Clock offers less than 1x10-12 frequency accuracy.
Timers & Clocks

8835 GPS Clock offers less than 1x10-12 frequency accuracy.

Operating at -30°C to +60°C temperature range with TNC GPS receiver port, 8835 GPS Clock provides 1 PPS accuracy with less than 50 nanoseconds RMS. Featuring 10/100 base-T Ethernet interface, unit leverages NTP, SNMP, Telnet, SSH, and FTP network protocols for status and control. Operated with 24 VDC, 48 VDC, or 100-240 VAC power source, unit is suitable for defense, SatCom, and wireless...

Read More »
C-Band Circulator allows output tuning to desired voltage/power levels.
Communication Systems & Equipment

C-Band Circulator allows output tuning to desired voltage/power levels.

Integrating 75watts CW forward and reverse power detectors, 4-ported and ferrite-based C-band Circulator offers radar and communications system designers unique solution to enhance signal clarity. Including low insertion loss of 0.4 dB, circulator comes with minimum isolation of 20dB. Featuring VSWR of 1.25:1, unit is housed in aluminum body weighing 5-ounces. Device includes detection...

Read More »
8461 NTP Server offers 10/100 Base-T Ethernet interfacing.
Computer Hardware & Peripherals

8461 NTP Server offers 10/100 Base-T Ethernet interfacing.

Using optical IRIG-B DC-level shift or Wireline Modulated IRIG-B link with on-board OCXO holdover oscillator, 8461 NTP Server helps to provide critical time synchronization bridge to Isolated Network Domains. Operating with IRIG-B122 or IRIG-B126 time code, unit uses 50 Ohm single-ended BNC RF cable and offers 2:1 to 6:1 modulation ratio. Suitable for defense, SatCom, and wireless applications,...

Read More »
X-band Direct Synthesizer/Upconverter SYN152 features LVTTL switching of 50 ns.
Electronic Components & Devices

X-band Direct Synthesizer/Upconverter SYN152 features LVTTL switching of 50 ns.

Suitable for airborne environments, SSMP- and SMP-connected lightweight SYN152 operates from -40o C to +85o C. Featuring four x2, x3, x4, and x17 multiplied output ports with various powers in either the L-, S-, or X-bands as well as a X-band BIT detector, unit comes with UHF input power at -6 dBm. Synthesizer can output 0 dBm in the S-band, 2 dBm in the X3 L-band, 4 dBm in the X2 L-band, and 10...

Read More »
TRUE Surface Mount Circulators for Radar Highlight TRAK's Latest Microwave Innovations on Display at EDI-Con 2016
Communication Systems & Equipment

TRUE Surface Mount Circulators for Radar Highlight TRAK's Latest Microwave Innovations on Display at EDI-Con 2016

September 16, 2016Â- - Smiths Microwave Subsystems is pleased to announce that advanced surface mount technology has led TRAK to deliver the first-ever circulator that can be used in automated assembly of phased array radar assemblies. You’ll find this product and several other microwave component and assembly innovations on display at the Smiths Microwave Subsystems Booth #721 at EDI-Con...

Read More »
Time and Frequency System features internal GPS receiver.
Electronic Components & Devices

Time and Frequency System features internal GPS receiver.

Housed in ruggedized enclosure, tactical 8836 Series integrates ground-based GPS receiver module, rubidium oscillator, time and frequency signal generation, and control/status circuitry. Standard outputs include 1 PPS, low noise 10 MHz Network Time Protocol, and two IRIG B outputs over multi-mode fiber. When tracking GPS with TFOM of 3 or better, discipline algorithm steers internal oscillator...

Read More »
Latching Circulator-Isolator offers 1 µs switching speed.
Electrical Equipment & Systems

Latching Circulator-Isolator offers 1 µs switching speed.

CoveringÂ- bandwidths across 16–35 GHz range, Ka-Band Dual-Junction Latching Circulator-Isolator is suitable for satellite communications links, commercial aviation systems, missile systems, and other high-rel aerospace applications. Unit offers low insertion loss of 0.2 dB in transmit mode and 0.4 dB in receive mode. Device will handle +39 dBm transmit power with 25 dB isolation to...

Read More »
Next-Gen TX, RX, and Timing Modules by TRAK at IMS 2015
Controls & Controllers

Next-Gen TX, RX, and Timing Modules by TRAK at IMS 2015

TRAK Microwave has chosen IMS 2015 in Phoenix to announce the availability of several new aerospace and SATCOM communication system subassemblies and precision network timing products. These new products demonstrate the latest size, weight, and performance (SWaP) requirements for integrated multi-function assemblies and synchronization in both civilian and military communications. Ku-Band Block...

Read More »

All Topics