TEGAM, Inc.
Geneva, OH 44041
Redesigned Function/Arbitrary Waveform Generators Released
ENEVA, OH 1/16/07 - TEGAM, Inc. announces the release of the newly redesigned 2700A Hybrid Series Arbitrary Waveform Generators. Offered in both single and dual channels, the 2700A series has the largest waveforms, widest bandwidth, and fastest rise time in its price class. External reference and synchronization are also included. Using a hybrid waveform generator design, TEGAM combined the best...
Read More »Waveform Generator utilizes hybrid functionality.
Bench-top Model 2732 combines Direct Digital Synthesis and true arbitrary waveform generation. Dual independent channels are capable of sourcing waves up to 50 MHz and storing 4 million points of 14-bit waveform data per channel. While able to simulate non-periodic waves, stand-alone instrument can also reproduce quadrature sensor signals. Users can set internal relative phase between channels...
Read More »High-Voltage Amplifier is suited for MEMS actuators.
Designed for use with Model 9070 MEMS Engine Driver System, Model 2375 features 4 channels, each rated for 20 mA continuous current with 0.2 ohm output impedance and independent voltage monitor output for use in closed loop system. Amplifier can drive capacitive loads up to 200 pF while maintaining full power bandwidth, exceeding 5 kHz. Product is suited for MEMS comb drives, cantilevered beams,...
Read More »Power Amplifier has bandwidth of DC to 2.0 MHz.
Manufactured in compact, rack-mountable chassis, Model 2348 meets requirements for MEMS testing, transducer characterization, and pulse applications. Independent, buffered, voltage monitor output reduces output signal to 20:1 for 50 ohm inputs and 10:1 for inputs exceeding 1 Megohm. Continuous current of 750 mA is available at voltages up to 50 Vp-p, providing 18.75 W of ac or dc output power to...
Read More »MEMS Driver suits rotating MEMS microengines.
High-voltage, multi-channel Model 9070 integrates Super Ã-µDriver(TM) Software, one 2375 MEMS Driver Amplifier providing 4 output channels, and two 2414A-GS arbitrary waveform generators with built-in sequencers and programmable synchronous outputs. System fulfills need for characterization, dynamic performance evaluation, and reliability assessment for orthogonal comb drives, cantilevered...
Read More »LCR Meter suits automated impedance testing.
Model 3550 measures within frequency range of 42 Hz to 5 MHz with measurement speed of 18 mS and accuracy of 0.10%. It offers 16 ac measurement parameters, 4,500 programmable frequency points, and built-in comparator with 10-bin capability. Additional features include 3 LED displays, RS-232C, and I/O connectors. Meter is suited for traditional component testing, materials characterization,...
Read More »LCR Meter measures 8 x 4 x 7 in. and weighs 5-½ lb.
Model 3525 general-purpose programmable LCR Meter suits impedance parameter testing. Flexible design allows testing of capacitors, inductors, coils, resistors, materials, thermoelectric cooling devices, and piezoelectric sensors. Accuracy of 0.08% and measurement speed of 15 mS is provided. It also features 99 storable panel settings, dual 4Ã-½ digit LED display, voltage and current monitors,...
Read More »RF Power Sensor Calibrator has wide frequency range.
With 100 kHz to 18 GHz frequency range, model 1827 Wideband RF Power Sensor Calibrator uses one standard for calibration. It calibrates most power sensors in 30 min or less and has 2 switchable RF inputs. All connectors are located on front panel, and internal Thermistor RF Transfer Standard is temperature controlled. Changes in ambient temperature do not affect power measurements, and DC power...
Read More »Power Meter measures RF using DC substitution technology.
Model 1804 Single Type IV RF Power Meter is designed for use with bolometer elements and external DVM to measure high frequency or microwave power. Substituted DC power levels ranging from 10 mW to 30 mW can be measured to within Ã-
Read More »Heater provides regulated standby power to RF mounts.
Model 1820 2-channel RF Mount Heater provides stable power source for 1 or 2 Precision RF Coaxial Power Standards (mounts) when mount is not being used to take measurements. It maintains mount at operating temperature, reducing warm-up time when mount is transferred to active use. Heater is for use on bench or in rack and includes LEDs and analog meters on front panel. Standard equipment includes...
Read More »U.S. Air Force Modernizes Laboratories with New TEGAM RF Power Standards
USAF increases cal lab capabilities and productivity while reducing support costs by implementing a simple calibrator upgrade GENEVA, OH – TEGAM, Inc., a leading supplier of innovative RF power measurement technology, was recently awarded a contract with the U.S Air Force to provide 48 TEGAM Model 2505A 6 kHz – 18 GHz RF Power Standards to modernize RF power sensor calibrators used in the...
Read More »Redesigned Function/Arbitrary Waveform Generators Released
ENEVA, OH 1/16/07 - TEGAM, Inc. announces the release of the newly redesigned 2700A Hybrid Series Arbitrary Waveform Generators. Offered in both single and dual channels, the 2700A series has the largest waveforms, widest bandwidth, and fastest rise time in its price class. External reference and synchronization are also included. Using a hybrid waveform generator design, TEGAM combined the best...
Read More »Waveform Generator utilizes hybrid functionality.
Bench-top Model 2732 combines Direct Digital Synthesis and true arbitrary waveform generation. Dual independent channels are capable of sourcing waves up to 50 MHz and storing 4 million points of 14-bit waveform data per channel. While able to simulate non-periodic waves, stand-alone instrument can also reproduce quadrature sensor signals. Users can set internal relative phase between channels...
Read More »High-Voltage Amplifier is suited for MEMS actuators.
Designed for use with Model 9070 MEMS Engine Driver System, Model 2375 features 4 channels, each rated for 20 mA continuous current with 0.2 ohm output impedance and independent voltage monitor output for use in closed loop system. Amplifier can drive capacitive loads up to 200 pF while maintaining full power bandwidth, exceeding 5 kHz. Product is suited for MEMS comb drives, cantilevered beams,...
Read More »Power Amplifier has bandwidth of DC to 2.0 MHz.
Manufactured in compact, rack-mountable chassis, Model 2348 meets requirements for MEMS testing, transducer characterization, and pulse applications. Independent, buffered, voltage monitor output reduces output signal to 20:1 for 50 ohm inputs and 10:1 for inputs exceeding 1 Megohm. Continuous current of 750 mA is available at voltages up to 50 Vp-p, providing 18.75 W of ac or dc output power to...
Read More »MEMS Driver suits rotating MEMS microengines.
High-voltage, multi-channel Model 9070 integrates Super Ã-µDriver(TM) Software, one 2375 MEMS Driver Amplifier providing 4 output channels, and two 2414A-GS arbitrary waveform generators with built-in sequencers and programmable synchronous outputs. System fulfills need for characterization, dynamic performance evaluation, and reliability assessment for orthogonal comb drives, cantilevered...
Read More »LCR Meter suits automated impedance testing.
Model 3550 measures within frequency range of 42 Hz to 5 MHz with measurement speed of 18 mS and accuracy of 0.10%. It offers 16 ac measurement parameters, 4,500 programmable frequency points, and built-in comparator with 10-bin capability. Additional features include 3 LED displays, RS-232C, and I/O connectors. Meter is suited for traditional component testing, materials characterization,...
Read More »LCR Meter measures 8 x 4 x 7 in. and weighs 5-½ lb.
Model 3525 general-purpose programmable LCR Meter suits impedance parameter testing. Flexible design allows testing of capacitors, inductors, coils, resistors, materials, thermoelectric cooling devices, and piezoelectric sensors. Accuracy of 0.08% and measurement speed of 15 mS is provided. It also features 99 storable panel settings, dual 4Ã-½ digit LED display, voltage and current monitors,...
Read More »RF Power Sensor Calibrator has wide frequency range.
With 100 kHz to 18 GHz frequency range, model 1827 Wideband RF Power Sensor Calibrator uses one standard for calibration. It calibrates most power sensors in 30 min or less and has 2 switchable RF inputs. All connectors are located on front panel, and internal Thermistor RF Transfer Standard is temperature controlled. Changes in ambient temperature do not affect power measurements, and DC power...
Read More »Power Meter measures RF using DC substitution technology.
Model 1804 Single Type IV RF Power Meter is designed for use with bolometer elements and external DVM to measure high frequency or microwave power. Substituted DC power levels ranging from 10 mW to 30 mW can be measured to within Ã-
Read More »