Techcon Systems
Cypress, CA 90630
New Jet Valve Dispensing System Increases Speed and Reduces Scrap During Dispensing Process
TS9800 Series increases productivity, improve product quality and reduce manufacturing cost. Fast dispensing speeds and capability to dispense dots and lines as small as 0.5nL at up to 1500 Hz continuous and 2000 Hz max bursts for high throughput on wide range of fluid types and viscosities. TS980 Smart Controller offers friendly user-interface and touch screen for faster setup and is industry...
Read More »
Techcon Announces New Products at productronica Following New Brand Launch
Cypress, CA - November 2017 - Techcon, a leader in precision fluid dispensing technologies, today announced plans to exhibit in Hall A2, Stand 135 at productronica 2017, scheduled to take place Nov. 14 – 17, 2017 at the Messe München in Germany. Following the company’s new brand launch, company representatives will demonstrate several new products, including the TSM50BP Meter Mix, TS8100...
Read More »
Techcon Systems' DPM Diaphragm Valve Wins the NPI Award for Dispensing Equipment
Garden Grove, CA- – Techcon Systems, a product group of OK International, announces that it has been awarded a 2016 NPI Award in the category of Dispensing Equipment for its TS5624 Disposable Path Material Diaphragm Valve. The award was presented to the company during a Tuesday, March 15, 2016 ceremony that took place at the Las Vegas Convention Center during the IPC APEX EXPO. Can La, Product...
Read More »Hot Melt Jet Valve and Controller offer high-temp operation.
Based on single replaceable diaphragm, TS9300HM Series PUR Hot Melt Jet Valve eliminates dynamic fluid seals common in all other jets. Jetting mechanism is isolated from fluid to ensure contamination-free operation.- To minimize cleaning, syringe heater features disposable feed tube. Companion TS930 Controller offers- precise fluid management and standalone or remote control operation. PID...
Read More »Manual Syringe Assembly (1 cc) does not require compressed air.
As 1 ml dispensing solution- that eliminates compressed air requirements, MSA401L-1 consists of- barrel,- plunger, and- piston. Fully assembled solution also does not require any lubrication. While barrel and plunger are made from polypropylene resin, piston is made from thermoplastic rubber.
Read More »
Techcon Systems to Display Full Line of Valves at Productronica 2015
Garden Grove, CA — Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, today announced they will exhibit a full line of valves and robots in Hall A4, Booth 221 at the upcoming Productronica International Trade Fair, scheduled to take place November 10-13, 2015 at the Messe in Munich, Germany. On display will be Techcon's newly...
Read More »
Manual Syringe Gun delivers optimal usability and control.
Hand-held, manually operated TS755SG- promotes user control over dispensing fluid from pre-filled syringes. Design facilitates setup and use, while full-hand trigger minimizes operator fatigue. Available in sizes design for compatibility with 10, 30, and 55 cc syringes, dispenser does not require any pneumatics or- battery/electrical power and comes with gun handle and- push rod as well as...
Read More »
Diaphragm Valve features disposable material path.
With disposable material path, Model TS5624DMP enables difficult fluids and pre-mixed 2-part epoxies to be dispensed without need for frequent cleaning. Seal-less valve dispenses low to medium viscosity fluids over wide range of shot and bead sizes, down to fraction of a micro liter. Wetted parts are manufactured from black Polyethylene to prevent moisture and UV light from coming into contact...
Read More »
Learn about Techcon Systems' Fluid Dispensing Systems at AUTOMATION 2015 in India
Garden Grove, CA- — Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, will exhibit in Booth I-41, Hall 1 at AUTOMATION 2015, scheduled to take place August 24-27, 2015 at the Bombay Convention and Exhibition Center in Mumbai, India. Company representatives will showcase the new TSR2000 Bench Top Robot and the full Techcon...
Read More »
Learn About Techcon Systems' Free Application Testing Services at APEX
Garden Grove, CA- – Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, will exhibit in Booth #627 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. Company representatives will discuss the company’s application testing service and showcase the new TSR2000 Bench...
Read More »
New Jet Valve Dispensing System Increases Speed and Reduces Scrap During Dispensing Process
TS9800 Series increases productivity, improve product quality and reduce manufacturing cost. Fast dispensing speeds and capability to dispense dots and lines as small as 0.5nL at up to 1500 Hz continuous and 2000 Hz max bursts for high throughput on wide range of fluid types and viscosities. TS980 Smart Controller offers friendly user-interface and touch screen for faster setup and is industry...
Read More »Techcon to Show New Smart Dispensing Robot at the ASSEMBLY Show
CYPRESS, Calif., Oct. 22, 2018 /PRNewswire/ -- Techcon, part of OK International and Dover (NYSE: DOV) and a leader in precision fluid dispensing technologies, will exhibit at The ASSEMBLY Show on October 23-25, 2018, in Rosemont, IL. The company will display the TSR2000 Smart Dispensing Robot, along with their latest PC Pump, Smart Valve Controllers, and Dispensing Guns. The TSR2000 Smart...
Read More »
Techcon Announces New Products at productronica Following New Brand Launch
Cypress, CA - November 2017 - Techcon, a leader in precision fluid dispensing technologies, today announced plans to exhibit in Hall A2, Stand 135 at productronica 2017, scheduled to take place Nov. 14 – 17, 2017 at the Messe München in Germany. Following the company’s new brand launch, company representatives will demonstrate several new products, including the TSM50BP Meter Mix, TS8100...
Read More »
Techcon Systems' DPM Diaphragm Valve Wins the NPI Award for Dispensing Equipment
Garden Grove, CA- – Techcon Systems, a product group of OK International, announces that it has been awarded a 2016 NPI Award in the category of Dispensing Equipment for its TS5624 Disposable Path Material Diaphragm Valve. The award was presented to the company during a Tuesday, March 15, 2016 ceremony that took place at the Las Vegas Convention Center during the IPC APEX EXPO. Can La, Product...
Read More »Hot Melt Jet Valve and Controller offer high-temp operation.
Based on single replaceable diaphragm, TS9300HM Series PUR Hot Melt Jet Valve eliminates dynamic fluid seals common in all other jets. Jetting mechanism is isolated from fluid to ensure contamination-free operation.- To minimize cleaning, syringe heater features disposable feed tube. Companion TS930 Controller offers- precise fluid management and standalone or remote control operation. PID...
Read More »Techcon Announces 55 Years of Growth
Garden Grove, CA- – Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, is pleased to announce that 2016 marks the company’s 55-year anniversary. “This year marks a double anniversary for Techcon Systems, 55 years since the company was founded and 20 years since we became part of OK International,” said Bryan Gass, Vice...
Read More »Manual Syringe Assembly (1 cc) does not require compressed air.
As 1 ml dispensing solution- that eliminates compressed air requirements, MSA401L-1 consists of- barrel,- plunger, and- piston. Fully assembled solution also does not require any lubrication. While barrel and plunger are made from polypropylene resin, piston is made from thermoplastic rubber.
Read More »
Techcon Systems to Display Full Line of Valves at Productronica 2015
Garden Grove, CA — Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, today announced they will exhibit a full line of valves and robots in Hall A4, Booth 221 at the upcoming Productronica International Trade Fair, scheduled to take place November 10-13, 2015 at the Messe in Munich, Germany. On display will be Techcon's newly...
Read More »
Manual Syringe Gun delivers optimal usability and control.
Hand-held, manually operated TS755SG- promotes user control over dispensing fluid from pre-filled syringes. Design facilitates setup and use, while full-hand trigger minimizes operator fatigue. Available in sizes design for compatibility with 10, 30, and 55 cc syringes, dispenser does not require any pneumatics or- battery/electrical power and comes with gun handle and- push rod as well as...
Read More »
Diaphragm Valve features disposable material path.
With disposable material path, Model TS5624DMP enables difficult fluids and pre-mixed 2-part epoxies to be dispensed without need for frequent cleaning. Seal-less valve dispenses low to medium viscosity fluids over wide range of shot and bead sizes, down to fraction of a micro liter. Wetted parts are manufactured from black Polyethylene to prevent moisture and UV light from coming into contact...
Read More »