Snap-on Inc.
Kenosha, WI 53141
Share:
Air Ratchet suits automotive repair applications.
Model AT702 Blue-PointÃ-® 3/8 in. square drive air ratchet utilizes flywheel technology to reach 65 ft-lbs of torque (max). Unit's mounted air motor design offers ball-bearing components and planetary 3-gear system that reaches free speeds of 200 rpm. Heavy-duty, ergonomic drive body design includes cushioned grip and handle to reduce vibration and insulate against low temperatures. Its vinyl...
Read More »
Impact Wrench provides both comfort and high torque.
Square-drive Model AT600 Blue-Point-® -½ in., with ergonomic design, has one-finger forward/reverse lever, adjustable, 4-position air regulator, and weighs only 4.1 lb. Unit provides maximum forward torque of 550 lb-ft and reverse torque of 600 lb-ft. Twin-hammer mechanism, surrounded in oil bath, operates at forward speed of 7,000 rpm and reverse speed of 8,000 rpm. Both aluminum front and...
Read More »
Impact Wrench has muffler for quiet operation.
Lightweight Snap-on IMC500 1/2 in. square-drive wrench fastens and removes lug nuts, bolts, and screws in quiet and open modes. In quiet mode, exhaust runs through handle, providing quieter operation. When job requires more power, technicians can bypass muffler and add more torque. At full power, wrench achieves 525 lb-ft of forward torque and 620 lb-ft of reverse torque. It weighs 4.4 lb and has...
Read More »Mobile Battery Charger improves battery life.
Model CTC328 Versa Volt Smart Charger plugs into any 12 Vdc vehicle outlet. Microprocessor monitors state of battery pack every 10 seconds to ensure battery is fully charged. Smart technology inhibits unit from charging hot battery pack and stops charging based on state of charge, not battery pack temperature. Fast charging takes only 45 minutes. Red light indicates unit is charging, while green...
Read More »
Air Ratchet offers 2 power modes.
FAR7200 3/8 in. Drive Air Ratchet features Power Boost Muffler Bypass System that maximizes air performance. In Quiet Mode, unit achieves 5-50 lbs-ft of torque at 200 rpm. In Open Mode, ratchet bypasses muffler and produces 5-70 lbs-ft of torque at 260 rpm. Motor features ball-bearing components and planetary 3-gear system. Stop Lock Pins help prevent pawl lock-up. Cushioned grip and contoured...
Read More »Tool Storage Unit provides 66,628 cu in. of storage.
KRL1004 is 108 7/16 in. x 29 1/32 in. x 45 7/8 in. (w x d x h) with 12,000 lb capacity. It has 28 drawers in variety of widths and heights. Stainless steel work surface offers more than 1,500 sq in. of workspace. Eight spring-loaded, heavy-duty casters provide mobility and lock when unit is stationary. End casters are equipped with swivel locks, which allow unit to pivot into optimal working...
Read More »
Storage System protects tool investments.
Maximum Security tool storage system comes with Remote Patrol electronic security system, which provides keyless entry and motion detector. System features Lock n' Roll drawers with non-slip liners, tubular locking system, and non-directional rubber mat. Top chest has 16,101 cubic in. capacity and measures 21 x 54 1/4 x 24 in. Roll cab has 2 sliding parts trays and one tote tray. It can handle up...
Read More »
Rotor/Brake Lathe operates at one spindle speed and feed rate.
EEBR308A combination rotor and drum brake lathe handles drums or rotors up to 100 lbs using 1 in. arbor. Separate feed motors power twin cutter tool and boring bar independently. Dovetail tool slides with adjustable gibs are protected with felt wipers. Twin cutter tool reconditions both brake rotor surfaces simultaneously and is adjustable with aluminum micrometer dial. Complete packages include...
Read More »
Top Chest adds dimensions to roll cabs.
Made of high-strength steel, KRAH5330 Bulk Storage Top Chest is 20 in. deep, 53 in. wide and 15 in. tall. Garage style front door is equipped with 3-point locking device that secures chest and keeps door closed when unit is moved. Top Chest firmly stacks as third unit above 53 in. roll cab and top chest combination. It can be used as charging station or to stow shop-related accessories.
Read More »
Cabinet Lockers house roll carts.
Docker Lockers can be mounted on either side of roll cabs. Roll carts fit inside for safe storage and then can be pulled out to use during job. Lockers have electrical knockouts and vented back panels to allow secure use of chargers and mini-refrigerators. KRL7018 fits company's KRL7000 cabs and has 29,139 cu in. of space. It measures 24.06 x 29.03 x 57.01 in. KRL1018 fits KRL1000 series and has...
Read More »