STS Instruments, Inc.
Suite 100
Irvine, CA 92614-5897
Battery Element Tester detects latent insulator defects.
Using high voltage AC pulse test stimulus signal combined with all-digital, EMF feedback voltage measurement system, Model 1657 screens out defective insulators in lead acid batteries during manufacturing. Short duration, high voltage but low energy pulsed waveform eliminates risk of heating element under test, allowing for detection of insulator holes, tears, and missing separators without...
Read More »
Hipot Testers feature PLC remote control.
Models 2512 and 2515, rated 250 and 500 VA respectively, feature electronic ramp and dwell timers as well as memory storage for test parameters. Instruments control most functions remotely through switches and analog inputs and outputs. With PLC remote control, test, reset, and interlock inputs are provided. Outputs include test in process, pass, fail, and reset. Both testers offer microprocessor...
Read More »
Hipot Testers offer interconnection capability.
Models 2512 and 2515 are 250 and 500 Va Hipot Testers with max output of 2,500 Vac and 5,000 Vac, respectively. Both offer 100 mA test current and can be interconnected to Model 2630 or 2660, 30 or 60 A ground bond testers to form complete test system that will perform AC Hipot and Ground Bond tests through single DUT connection. Microprocessor-controlled hipot testers can be used as stand-alone...
Read More »Test System performs 4 tests with single connection.
Interconnected Hipot and Ground Bond Testers perform AC Hipot, DC Hipot, Insulation Resistance, and Ground Bond tests with single Device Under Test connection. Any model of Series 2900 Hipot Testers can be interconnected with Model 2630 30 A Ground Bond Tester to form test system. All units are UL and TUV listed and offer LCD display, multiple test memories, electronic ramp and dwell, PLC remote...
Read More »
Ground Bond Tester provides 60 A of test current.
Model 2660 offers enough test current for products with higher input current ratings. Electronic dwell provides consistent timing and testing, while test setup memories allow test parameters to be stored and recalled. Remote control allows operator to configure instrument through PLC relay control. Tester includes milliohm-offset capability, no load setup, adjustable output current and milliohm...
Read More »
Ground Bond Tester simplifies safety agency testing.
The 2630, 30 A ground bond tester has LCD, electronic ramp and dwell, test setup memories and remote control capabilities for safety agency testing requirements from agencies such as UL, CSA, IEC, and European Norms. Operators can view test results and remotely configure instrument with PLC relay control. Interconnection to 2900 Series hipot tester allows 2630 to perform AC and DC dielectric...
Read More »
Hipot Testers are UL and TUV listed.
Series 2900 consists of three models: Model 2925 12 mA, 5 KVac hipot tester; Model 2935 12 mA, 5 KVac hipot and 5 mA, 6 KVdc hipot tester; and Model 2945 which provides 3-in-1 functionality including 12 mA 5 KVac hipot, 5 mA 6 KVdc hipot, and built-in insulation resistance tester with test range of up to 1,000 Megohms. All include microprocessor control, LCD, electronic ramp and dwell, test setup...
Read More »
AC Hipot Tester works remotely, can be automated.
Microprocessor controlled Model 2510 meets most UL, CSA, VDE, and IEC requirements. It provides test voltages up to 5,000 Vac and adjustable trip currents up to 10 mA, displays voltage or leakage current during testing, and has remote control that allows user to send signals for test and reset. Pass, fail, and processing outputs can be monitored remotely. Remote control allows instrument to be...
Read More »
Hipot Tester is fully microprocessor controlled.
Model 2503 DC provides test voltages up to 5,000 Vdc and adjustable trip currents up to 3.00 mA. Utilizing remote inputs, user can send signals for Test and Reset to run test cycle remotely. User is able to monitor instrument remotely for Pass, Fail, and Processing signal outputs. Remote safety interlock must be closed to allow test to start, preventing high voltage from being activated unless...
Read More »
Insulation Resistance Tester measures up to 200 Gigohms.
Microprocessor-controlled, digital Model 2205 provides resistance display of 0.01 Megohm to 200.0 Gigohm at voltage up to 1000 Vdc. PLC remote control provides inputs and outputs for remote testing. Tamper-resistant, front-panel design prevents operators from inadvertently modifying test parameters. Front-panel calibration allows calibration without opening instrument. Model 2205 includes LED...
Read More »Battery Element Tester detects latent insulator defects.
Using high voltage AC pulse test stimulus signal combined with all-digital, EMF feedback voltage measurement system, Model 1657 screens out defective insulators in lead acid batteries during manufacturing. Short duration, high voltage but low energy pulsed waveform eliminates risk of heating element under test, allowing for detection of insulator holes, tears, and missing separators without...
Read More »
Hipot Testers feature PLC remote control.
Models 2512 and 2515, rated 250 and 500 VA respectively, feature electronic ramp and dwell timers as well as memory storage for test parameters. Instruments control most functions remotely through switches and analog inputs and outputs. With PLC remote control, test, reset, and interlock inputs are provided. Outputs include test in process, pass, fail, and reset. Both testers offer microprocessor...
Read More »
Hipot Testers offer interconnection capability.
Models 2512 and 2515 are 250 and 500 Va Hipot Testers with max output of 2,500 Vac and 5,000 Vac, respectively. Both offer 100 mA test current and can be interconnected to Model 2630 or 2660, 30 or 60 A ground bond testers to form complete test system that will perform AC Hipot and Ground Bond tests through single DUT connection. Microprocessor-controlled hipot testers can be used as stand-alone...
Read More »Test System performs 4 tests with single connection.
Interconnected Hipot and Ground Bond Testers perform AC Hipot, DC Hipot, Insulation Resistance, and Ground Bond tests with single Device Under Test connection. Any model of Series 2900 Hipot Testers can be interconnected with Model 2630 30 A Ground Bond Tester to form test system. All units are UL and TUV listed and offer LCD display, multiple test memories, electronic ramp and dwell, PLC remote...
Read More »
Ground Bond Tester provides 60 A of test current.
Model 2660 offers enough test current for products with higher input current ratings. Electronic dwell provides consistent timing and testing, while test setup memories allow test parameters to be stored and recalled. Remote control allows operator to configure instrument through PLC relay control. Tester includes milliohm-offset capability, no load setup, adjustable output current and milliohm...
Read More »
Ground Bond Tester simplifies safety agency testing.
The 2630, 30 A ground bond tester has LCD, electronic ramp and dwell, test setup memories and remote control capabilities for safety agency testing requirements from agencies such as UL, CSA, IEC, and European Norms. Operators can view test results and remotely configure instrument with PLC relay control. Interconnection to 2900 Series hipot tester allows 2630 to perform AC and DC dielectric...
Read More »
Hipot Testers are UL and TUV listed.
Series 2900 consists of three models: Model 2925 12 mA, 5 KVac hipot tester; Model 2935 12 mA, 5 KVac hipot and 5 mA, 6 KVdc hipot tester; and Model 2945 which provides 3-in-1 functionality including 12 mA 5 KVac hipot, 5 mA 6 KVdc hipot, and built-in insulation resistance tester with test range of up to 1,000 Megohms. All include microprocessor control, LCD, electronic ramp and dwell, test setup...
Read More »
AC Hipot Tester works remotely, can be automated.
Microprocessor controlled Model 2510 meets most UL, CSA, VDE, and IEC requirements. It provides test voltages up to 5,000 Vac and adjustable trip currents up to 10 mA, displays voltage or leakage current during testing, and has remote control that allows user to send signals for test and reset. Pass, fail, and processing outputs can be monitored remotely. Remote control allows instrument to be...
Read More »
Hipot Tester is fully microprocessor controlled.
Model 2503 DC provides test voltages up to 5,000 Vdc and adjustable trip currents up to 3.00 mA. Utilizing remote inputs, user can send signals for Test and Reset to run test cycle remotely. User is able to monitor instrument remotely for Pass, Fail, and Processing signal outputs. Remote safety interlock must be closed to allow test to start, preventing high voltage from being activated unless...
Read More »
Insulation Resistance Tester measures up to 200 Gigohms.
Microprocessor-controlled, digital Model 2205 provides resistance display of 0.01 Megohm to 200.0 Gigohm at voltage up to 1000 Vdc. PLC remote control provides inputs and outputs for remote testing. Tamper-resistant, front-panel design prevents operators from inadvertently modifying test parameters. Front-panel calibration allows calibration without opening instrument. Model 2205 includes LED...
Read More »