Simco-Ion, Industrial Group
Hatfield, PA 19440
Share:
Narrow Web Cleaning System maintains clean print surface.
VACoNoTAC uses static bar, which neutralizes static charge and stops attraction of particulate to web, and low-pressure vacuum system that suctions particulate into dust collector. Two components clean web to 25 microns. Contact Cleaner Roll then breaks boundary layer of air for particle removal to 1 micron. Available in single- and double-sided cleaning, system comes complete with dust collector...
Read More »
AC Power Supply targets static control equipment.
Self-monitoring TrueAC Power Supply operates with Blue Bar to provide consistent static neutralization of materials traveling at speeds up to 2,500 fpm. When system is activated, Bar On indicator is illuminated, and during operation unit displays bar performance range and indicates when static bar needs to be cleaned. System includes local or remote on-off control and arc-detection circuit that...
Read More »
Static Control System features integrated monitoring.
Capable of neutralizing charged materials traveling up to 2,500 fpm, PerforMAX 3 incorporates bar graph display, status indicator lights, and remote display panel with alarm output. Standard System is suited for remote monitoring and control of ionization performance, while Hazardous Location (HL) System is approved for Classes I, II, and III environments. System eliminates static charges...
Read More »
Contact Cleaning Systems provide industrial static control.
Featuring clamshell design, QuadClam and HexClam are 4- and 6-roll contact cleaners that remove particulate from top and bottom web-surface. HexClam is available to 24 in., and QuadClam accommodates 30-60 in. widths. QuadClean and HexClean are 4- and 6-roll assemblies for top and bottom web-surface cleaning. Former is available to 24 in. wide, and latter accepts 30-60 in. widths. Operating at...
Read More »
Static Neutralizers are current limited for safety.
PerforMAXÃ-®II and PerforMAXÃ-®IIci automatically sense and adjust ion output needed to neutralize charged surface. They eliminate static charges even when installed 2-10 in. from webs and up to 20 in. on winders. Units can neutralize charged material traveling up to 2,500 fpm. Control module monitors and controls output at static bar, and displays conditions that may prevent peak...
Read More »
Web Cleaning System accommodates webs 2 to 144 in. wide.
Neutro-Vac System incorporates vacuum system and static control to clean and neutralize static charges from web materials. System is comprised of vacuum hood assembly connected via ducting to dust collector. Hood assembly options include non-contact, contact, intrinsically safe non-contact, contact with compressed air, and Pneumatic Lift option. Pneumatic Lift moves hood up to 4 in.,...
Read More »Static-Neutralizing Bar is suited for hazardous locations.
Blue Bar HL neutralizes static charges on webs at speeds to 2,500 fpm at 1 in., and can be mounted up to 6 in. from web at slower speeds. Static bar is UL/CUL listed for use in Class I (Division 1 and 2, Group D), Class II (Division 1 and 2, Group G), and Class III (Division 1 and 2) hazardous locations. Equipped with arc-detection circuitry, unit offers resistor-coupled, shockless operation,...
Read More »
Static Neutralizing System is current-limited.
PerforMAX automatically senses static neutralizing power needed to remove charges from surface, and adjusts ion output of static bar. System eliminates static charges when installed up to 10 in. from web surface (up to 20 in. on winders), and consists of control module and static bar. Range switch can be set where static bar is located less than or greater than 3 in. away from material. System...
Read More »
Shockless Static Bar displays condition status via lamps.
R50 Blue Bar System provides long range capabilities and open channel structure. System's high output makes it effective on web speeds up to 2,500 feet per minute, and allows bar to be mounted at distances up to 6 in. away from target material. R50 cable is metal shielded to reduce EMI and RFI. M167 power supply includes static bar monitoring circuit that detects arcing and conductive bar...
Read More »
Ionizing Air Blower and Bars eliminate static charge.
Aerostat Phoenix Ionizing Air Blower provides high volumes of ionized air to eliminate static charge from materials or surfaces where high voltages are created. It offers internal power supply, variable fan speed control, built in emitter point cleaner, illuminated ionization indicator, and on/off switch. Phoenix can neutralize static charges from up to 10 ft away. Static neutralizing bars come...
Read More »
Narrow Web Cleaning System maintains clean print surface.
VACoNoTAC uses static bar, which neutralizes static charge and stops attraction of particulate to web, and low-pressure vacuum system that suctions particulate into dust collector. Two components clean web to 25 microns. Contact Cleaner Roll then breaks boundary layer of air for particle removal to 1 micron. Available in single- and double-sided cleaning, system comes complete with dust collector...
Read More »
AC Power Supply targets static control equipment.
Self-monitoring TrueAC Power Supply operates with Blue Bar to provide consistent static neutralization of materials traveling at speeds up to 2,500 fpm. When system is activated, Bar On indicator is illuminated, and during operation unit displays bar performance range and indicates when static bar needs to be cleaned. System includes local or remote on-off control and arc-detection circuit that...
Read More »
Static Control System features integrated monitoring.
Capable of neutralizing charged materials traveling up to 2,500 fpm, PerforMAX 3 incorporates bar graph display, status indicator lights, and remote display panel with alarm output. Standard System is suited for remote monitoring and control of ionization performance, while Hazardous Location (HL) System is approved for Classes I, II, and III environments. System eliminates static charges...
Read More »
Contact Cleaning Systems provide industrial static control.
Featuring clamshell design, QuadClam and HexClam are 4- and 6-roll contact cleaners that remove particulate from top and bottom web-surface. HexClam is available to 24 in., and QuadClam accommodates 30-60 in. widths. QuadClean and HexClean are 4- and 6-roll assemblies for top and bottom web-surface cleaning. Former is available to 24 in. wide, and latter accepts 30-60 in. widths. Operating at...
Read More »
Static Neutralizers are current limited for safety.
PerforMAXÃ-®II and PerforMAXÃ-®IIci automatically sense and adjust ion output needed to neutralize charged surface. They eliminate static charges even when installed 2-10 in. from webs and up to 20 in. on winders. Units can neutralize charged material traveling up to 2,500 fpm. Control module monitors and controls output at static bar, and displays conditions that may prevent peak...
Read More »
Web Cleaning System accommodates webs 2 to 144 in. wide.
Neutro-Vac System incorporates vacuum system and static control to clean and neutralize static charges from web materials. System is comprised of vacuum hood assembly connected via ducting to dust collector. Hood assembly options include non-contact, contact, intrinsically safe non-contact, contact with compressed air, and Pneumatic Lift option. Pneumatic Lift moves hood up to 4 in.,...
Read More »Static-Neutralizing Bar is suited for hazardous locations.
Blue Bar HL neutralizes static charges on webs at speeds to 2,500 fpm at 1 in., and can be mounted up to 6 in. from web at slower speeds. Static bar is UL/CUL listed for use in Class I (Division 1 and 2, Group D), Class II (Division 1 and 2, Group G), and Class III (Division 1 and 2) hazardous locations. Equipped with arc-detection circuitry, unit offers resistor-coupled, shockless operation,...
Read More »
Static Neutralizing System is current-limited.
PerforMAX automatically senses static neutralizing power needed to remove charges from surface, and adjusts ion output of static bar. System eliminates static charges when installed up to 10 in. from web surface (up to 20 in. on winders), and consists of control module and static bar. Range switch can be set where static bar is located less than or greater than 3 in. away from material. System...
Read More »
Shockless Static Bar displays condition status via lamps.
R50 Blue Bar System provides long range capabilities and open channel structure. System's high output makes it effective on web speeds up to 2,500 feet per minute, and allows bar to be mounted at distances up to 6 in. away from target material. R50 cable is metal shielded to reduce EMI and RFI. M167 power supply includes static bar monitoring circuit that detects arcing and conductive bar...
Read More »
Ionizing Air Blower and Bars eliminate static charge.
Aerostat Phoenix Ionizing Air Blower provides high volumes of ionized air to eliminate static charge from materials or surfaces where high voltages are created. It offers internal power supply, variable fan speed control, built in emitter point cleaner, illuminated ionization indicator, and on/off switch. Phoenix can neutralize static charges from up to 10 ft away. Static neutralizing bars come...
Read More »