Quadro Engineering Corp.
Waterloo, ON N2V1A1 CAN
Come See What's New from the Particle Engineering & Process Specialists at Interphex 2011
Quadro Engineering, The Fitzpatrick Company and Microfluidics are teaming up at Interphex 2011 (March 29 - 31) in New York, in booths 3427, 3433 and 2071 respectively, to exhibit cutting-edge solutions to your particle engineering and processing needs. NEW from Quadro is the Ytron HV0-Emulsifier and Wet Mill, a formulation lab-scale machine that provides all the benefits of high velocity (HV)...
Read More »
Sifter Delumper handles up to 110,000 lb/hr.
Intended for food/pharmaceutical manufacturers, FlexSift S10 handles small batch operations, while FlexSift S30 is designed for larger batch/continuous flow operations. Units security screen, delump, and discharge, all without need for product feeder. Flush ground welds facilitate cleaning, while vibration-free design enables sifters to be coupled with most bulk bag unloaders and mixer...
Read More »
Wet Mill has high-shear design.
Employing rotor-stator suspension milling technology, high shear Ytron HV-Wet Mill is available in 3 different models ranging from 25-125 hp with capacities up to 150 gpm. Energy optimized tooling operates at tip speeds up to 70 m/sec with low power consumption, while sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft, optimizing clean-in-lace results. Options...
Read More »
Dual-Purpose Machine can be used for milling and screening.
QuadroÃ-® ComilSift allows processors to go from milling applications up to 15,000 lb/hr to security screening and delumping applications up to 99,000 lb/hr. Milling mode efficiency is optimized due to infeed diameter size, while positive 360Ã-º discharge of security screening mode segregates and retains impurities and other foreign materials to accelerate sifting times. Construction...
Read More »
Emulsifiers utilize submicron size reduction technology.
QuadroÃ-® HV-Emulsifier Series features 3 different models ranging from 20-125 hp depending on desired capacity, up to maximum of 250 gpm. All models utilize energy optimized tooling that operates at tip speeds up to 60 m/sec with low power consumption. Sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft for optimal CIP results. Various other equipment...
Read More »Full Range of Solids/Liquids Processing Solutions from Lab to Production Featured at Interphex 2009 Show
IDEX Sanitary (Quadro Engineering Corp./Wright Flow Technologies) - Booth No.: 736, will be showcasing their full range of solids/liquids processing solutions at Interphex 2009, in the Jacob K. Javits Convention Center, NYC (March 17- 19, 2009). The Solids Division of Quadro Engineering Corp. will feature key technologies such as the QuadroÃ-® Underdriven Series, the new QuadroÃ-®...
Read More »
Mixing Unit includes high shear homogenizer.
Suited for mixing, dispersion, and homogenizing systems, Quadro Mixing Unit with Serendip HSH features rotor tip speeds up to 197 ft/s under vacuum processing conditions. Unit delivers no cavitation due to processing staging and has gentle pumping discharge using low-shear force. Typical applications include toothpaste, creams/lotions, adhesives, hair gels/mousses, antacids, sauces/syrups, liquid...
Read More »Quadro Enters Partnership with Guelph Food Technology Centre
Quadro is proud to announce a new partnership with the Guelph, Ontario-based Guelph Food Technology Centre (GFTC) to put three new pieces of pilot-scale equipment at the disposal of the Centre. Developing a successful new food product is a risky venture, and carrying out experiments at a pilot-level scale can be a great savings in time, ingredients and frustration , explains Allen Mannen, GFTC's...
Read More »In-Line Powder Disperser offers throughputs to 400 gpm.
Available in 4 sanitary and industrial designed models offering liquid throughputs from 3 gpm, ZC5 is engineered to incorporate and disperse powders into liquid stream in single-pass. Rotor/stator design enables shearing of powders prior to hydration, producing homogeneous dispersions free of lumps and fish-eyes. Vacuum permits concentrations up to 25% by weight to be generated with minimal air...
Read More »In-Line Disperser handles difficult-to-wet gums.
Designed to incorporate and disperse gums into liquid stream in single pass, ZC Powder Disperser comes in 3 sanitary models with 3A, USDA approval and liquid throughputs from 3-120 gpm. Rotor-stator provides intense shearing of gums prior to hydration to produce homogenous dispersions that are free of lumps and fish eyes. Near-perfect vacuum permits concentrations up to 25% by weight to be...
Read More »Come See What's New from the Particle Engineering & Process Specialists at Interphex 2011
Quadro Engineering, The Fitzpatrick Company and Microfluidics are teaming up at Interphex 2011 (March 29 - 31) in New York, in booths 3427, 3433 and 2071 respectively, to exhibit cutting-edge solutions to your particle engineering and processing needs. NEW from Quadro is the Ytron HV0-Emulsifier and Wet Mill, a formulation lab-scale machine that provides all the benefits of high velocity (HV)...
Read More »
Sifter Delumper handles up to 110,000 lb/hr.
Intended for food/pharmaceutical manufacturers, FlexSift S10 handles small batch operations, while FlexSift S30 is designed for larger batch/continuous flow operations. Units security screen, delump, and discharge, all without need for product feeder. Flush ground welds facilitate cleaning, while vibration-free design enables sifters to be coupled with most bulk bag unloaders and mixer...
Read More »
Wet Mill has high-shear design.
Employing rotor-stator suspension milling technology, high shear Ytron HV-Wet Mill is available in 3 different models ranging from 25-125 hp with capacities up to 150 gpm. Energy optimized tooling operates at tip speeds up to 70 m/sec with low power consumption, while sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft, optimizing clean-in-lace results. Options...
Read More »Quadro Engineering Corp. Releases New Enhanced Website
Quadro is proud to introduce our new, enhanced website to the marketplace. The new site features: 1. Easier to use navigation tools requiring fewer clicks to get to the information you need by Industry, Product Line and Application. 2. Dedicated websites featuring Quadro's key product areas, i.e. Solids Processing, Liquids Processing and Material Handling that offer topics most relevant to the...
Read More »
Dual-Purpose Machine can be used for milling and screening.
QuadroÃ-® ComilSift allows processors to go from milling applications up to 15,000 lb/hr to security screening and delumping applications up to 99,000 lb/hr. Milling mode efficiency is optimized due to infeed diameter size, while positive 360Ã-º discharge of security screening mode segregates and retains impurities and other foreign materials to accelerate sifting times. Construction...
Read More »
Emulsifiers utilize submicron size reduction technology.
QuadroÃ-® HV-Emulsifier Series features 3 different models ranging from 20-125 hp depending on desired capacity, up to maximum of 250 gpm. All models utilize energy optimized tooling that operates at tip speeds up to 60 m/sec with low power consumption. Sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft for optimal CIP results. Various other equipment...
Read More »Full Range of Solids/Liquids Processing Solutions from Lab to Production Featured at Interphex 2009 Show
IDEX Sanitary (Quadro Engineering Corp./Wright Flow Technologies) - Booth No.: 736, will be showcasing their full range of solids/liquids processing solutions at Interphex 2009, in the Jacob K. Javits Convention Center, NYC (March 17- 19, 2009). The Solids Division of Quadro Engineering Corp. will feature key technologies such as the QuadroÃ-® Underdriven Series, the new QuadroÃ-®...
Read More »Quadro Engineering Partners with Micro-Macinazione to Offer Jet Mill Product Line
DECEMBER, 2008 Micro-Macinazione SA, a global leader in jet milling technology, barrier containment feeding and ancillary systems has appointed Quadro Engineering Corp. as the exclusive distributor of their Jet-Mill equipment line across North/South America. Beginning January 1st, 2009, Quadro will handle all inquiries/sales and also, provide services to both new and existing Jet Mill customers....
Read More »Emulsion Days Comes to North America
For the fourth consecutive year, AC Serendip is proud to present Emulsion Days. This year's venue is in New York City, November 13 - 14th, 2008. Emulsion Days is the International platform for the decision-makers of cosmetic and pharmaceutical product manufacturers, particularly those who produce semi-solid forms (e.g. cosmetic/pharmaceutical creams). These manufacturers are faced with...
Read More »
Mixing Unit includes high shear homogenizer.
Suited for mixing, dispersion, and homogenizing systems, Quadro Mixing Unit with Serendip HSH features rotor tip speeds up to 197 ft/s under vacuum processing conditions. Unit delivers no cavitation due to processing staging and has gentle pumping discharge using low-shear force. Typical applications include toothpaste, creams/lotions, adhesives, hair gels/mousses, antacids, sauces/syrups, liquid...
Read More »