Permabond Engineering Adhesives
Somerset, NJ 08873
Cyanoacrylate Adhesives are designed for flexible substrates.
Suited for bonding applications that involve impact, peel, and flexing stresses, Permabond 731 and Permabond 735 single component, instant cyanoacrylate adhesives can adhere rapidly to variety of surfaces including aluminum, steel, plastics, and rubbers. Permabond 735 is opaque black in appearance, while Permabond 731 is crystal clear.
Read More »Gasket Material allows repairs without damaging soft metal.
Formulated to remain soft and flexible, GasketmakerÃ-® LH197 is easily removed in applications that require regular disassembly or that involve soft metals. It provides complete surface contact, filling in irregularities in metal and eliminating potential leak paths. Forming instant, leak-free seal, product allows approximately 5 min of adjustment after assembly. After complete room...
Read More »Epoxy Adhesives cure at room temperature.
Resistant to harsh environmental conditions, chemicals, and water, adhesive range includes clear, non-yellowing epoxy as well as flexible grade with peel-strength that allows flexibility of joint design while maintaining performance. Products come in dispensing cartridges with mixing nozzles and have 1:1 mix ratio of resin and hardener. They are suited for bonding, sealing, encapsulating, and...
Read More »Structural Acrylic Adhesives bond to variety of materials.
Formulated for bonding plastics, metal, composites, ceramics, wood, and glass, Structural Acrylic Adhesives cure to handling strength within minutes and achieve working strength within 30 minutes. Products are available as separate adhesive with brush on initiator or as no-mix bead-on-bead acrylic. Non-flammable adhesives are resistant to impact, shear, and peel loads, making them suitable for...
Read More »Adhesives cure in seconds when exposed to UV light.
Able to adhere to various substrates, single-part adhesives allow for accurate alignment of components since adhesive will not cure until exposed to UV light. Non-yellowing products, designed for optical clarity, are available in range of viscosities to suit gap fill requirements of joints. Flexible, shock- and impact-resistant grade is also available, suited for areas where differential thermal...
Read More »Threadlocking Adhesive resists temperatures to 230-
Permabond HH131 anaerobic adhesive offers chemical resistance and provides permanent seal that protects against loosening due to vibration. Single component product works by filling gap between mated parts and curing to plastic. It has viscosity of 10,000 cp and is suited for fasteners as large as 1Ã-½ in. diameter.
Read More »Non-Drip Adhesive cures almost instantly in thin lines.
Able to bond plastics, rubber, ceramics, and metal, Permabond 2011 cyanoacrylate adhesive will not run or sag, even on vertical surfaces. It is suited for applications that require high-viscosity for ease of dispensing or to facilitate gap filling. Used in larger gaps, cure speed will be reduced to allow for proper positioning prior to cure. Product cures by reacting with traces of moisture on...
Read More »Cyanoacrylate Adhesive has consistent cure speed.
PermabondÃ-® 101 low-viscosity, ethyl cyanoacrylate adhesive has consistent cure speed and bond strength. Suited for use on plastics, rubbers, and metals, product has appropriate stabilization, which maximizes performance throughout shelf-life. It can be used to bond closely fitting parts and is suited for wicking or penetrating applications. Other applications include rubber bonding, jewelry...
Read More »Retaining Compound resists temperatures to 350-
PERMABOND HM 160 anaerobic, medium-viscosity compound ensures complete coverage to create 100% contact between metal surfaces. Single-component liquid cures only when in contact with metal parts and oxygen is excluded. By filling gap between mated parts and curing to hard plastic, product prevents corrosion and loosening caused by vibration and thermal expansion. It eliminates need for overly...
Read More »Threadlockers/Sealants are offered in various viscosities.
PERMABOND PURE Anaerobic Adhesive/Sealants are single component liquids that cure when in contact with metal parts and oxygen is excluded. They fill gaps between mated parts by curing to hard plastic and locking assembly in place. PERMABOND PURE Threadlocking Adhesives/Sealants cure to cross linked plastic with environmental and temperature resistance. Examples include medium-strength,...
Read More »Enhanced Permabond Adhesives and Sealants Brochure
SOMERSET, NJ - Permabond Engineering Adhesives launched an enhanced version of their product brochure. This newest edition of the brochure contains new products and increased temperature limits for existing products. Easier to read charts and graphs of a vast array of data related to product selection and usage recommendations are included. Adhesion, strength, flexibility, thermal expansion,...
Read More »New Literature - Permabond Adhesives for Medical Devices
SOMERSET, NJ -PermabondÃ-® Engineering Adhesives announces the availability of its latest bulletin on its Medical Device Product Line. This bulletin contains information regarding products for Disposable Device Assembly, Diagnostic & Surgical Equipment, and Assistive Devices & Technology. Detailed information on new biocompatible products such as Permabond 820, a high temperature...
Read More »Cyanoacrylate Adhesives are designed for flexible substrates.
Suited for bonding applications that involve impact, peel, and flexing stresses, Permabond 731 and Permabond 735 single component, instant cyanoacrylate adhesives can adhere rapidly to variety of surfaces including aluminum, steel, plastics, and rubbers. Permabond 735 is opaque black in appearance, while Permabond 731 is crystal clear.
Read More »Dave Czaplewaki Joins Permabond as National Sales and Marketing Manager
SOMERSET, NJ - PermabondÃ-® Engineering Adhesives is delighted to announce that Dave Czaplewski joined Permabond as National Sales and Marketing Manager. Reporting directly to General Manager, Paolo Grossi, Mr. Czaplewski will have complete responsibility for US sales and marketing. We are extremely pleased to have Dave leading the sales and marketing team. His 28 years of sales and...
Read More »Gasket Material allows repairs without damaging soft metal.
Formulated to remain soft and flexible, GasketmakerÃ-® LH197 is easily removed in applications that require regular disassembly or that involve soft metals. It provides complete surface contact, filling in irregularities in metal and eliminating potential leak paths. Forming instant, leak-free seal, product allows approximately 5 min of adjustment after assembly. After complete room...
Read More »Epoxy Adhesives cure at room temperature.
Resistant to harsh environmental conditions, chemicals, and water, adhesive range includes clear, non-yellowing epoxy as well as flexible grade with peel-strength that allows flexibility of joint design while maintaining performance. Products come in dispensing cartridges with mixing nozzles and have 1:1 mix ratio of resin and hardener. They are suited for bonding, sealing, encapsulating, and...
Read More »Structural Acrylic Adhesives bond to variety of materials.
Formulated for bonding plastics, metal, composites, ceramics, wood, and glass, Structural Acrylic Adhesives cure to handling strength within minutes and achieve working strength within 30 minutes. Products are available as separate adhesive with brush on initiator or as no-mix bead-on-bead acrylic. Non-flammable adhesives are resistant to impact, shear, and peel loads, making them suitable for...
Read More »Adhesives cure in seconds when exposed to UV light.
Able to adhere to various substrates, single-part adhesives allow for accurate alignment of components since adhesive will not cure until exposed to UV light. Non-yellowing products, designed for optical clarity, are available in range of viscosities to suit gap fill requirements of joints. Flexible, shock- and impact-resistant grade is also available, suited for areas where differential thermal...
Read More »Threadlocking Adhesive resists temperatures to 230-
Permabond HH131 anaerobic adhesive offers chemical resistance and provides permanent seal that protects against loosening due to vibration. Single component product works by filling gap between mated parts and curing to plastic. It has viscosity of 10,000 cp and is suited for fasteners as large as 1Ã-½ in. diameter.
Read More »Non-Drip Adhesive cures almost instantly in thin lines.
Able to bond plastics, rubber, ceramics, and metal, Permabond 2011 cyanoacrylate adhesive will not run or sag, even on vertical surfaces. It is suited for applications that require high-viscosity for ease of dispensing or to facilitate gap filling. Used in larger gaps, cure speed will be reduced to allow for proper positioning prior to cure. Product cures by reacting with traces of moisture on...
Read More »