PennEngineering
Danboro, PA 18916
Sefl-Clinching Fasteners install in stainless steel sheets.
Designed to install permanently into stainless steel sheets as thin as .030 in., PEM Stainless Self-Clinching Fasteners enable lighter designs by minimizingÃ- hardware parts count. Product line includes fasteners integrating captive screws for tool-only access to stainless assemblies; through-hole threaded and blind threaded standoffs; non-locking and self-locking floating nuts; fasteners for...
Read More »
Self-Clinching Fasteners can replace riveting or spot welding.
PEM-® SpotFast-® self-clinching fasteners can be used to attach 2 metal sheets too thin to weld, fasten sheets of unequal thicknesses, join dissimilar metals, attach ultra-thin metal sections, or join metal sheets to PCB or plastic panels. Sheets are permanently joined in- flush-attachment connection without protrusions on either side, and rotational capability allows fastener to act...
Read More »
Specialized Tooling installs self-clinching nuts in 1 operation.
Integrating modified punch and anvil, PEMSERTER-® Tooling can install PEM-® Type S self-clinching nuts permanently in thin aluminum sheets without need to pre-punch mounting hole in separate operation. Raised ring on anvil allows fastener to pierce its own mounting hole and then assists in final clinching process. PEM Type S nuts with thread sizes -¼-20, 5/16-18, M6, and M8 and with -2 shank...
Read More »
Self-Clinching Micro Pins suit compact electronic assemblies.
Available with dia of 1 mm and in lengths down to 2 mm, PEM Type MPP(TM) micro pins can be installed permanently into stainless steel or other sheet materials as thin as 5 mm with hardness up to HRB 92 on Rockwell B scale or up to HB 195 on Brinell. RoHS-compliant, corrosion resistant pins are made of precipitation-hardened stainless steel. Chamfered end allows for simple mating-hole alignment...
Read More »
Colored Screw Fasteners are offered in 3 mounting styles.
Installed by being pressed into mounting holes, PEMÃ-® C.A.P.S.(TM) products incorporate captive screw and plastic colored cap into spring-loaded assembly. Anticross-threading screw technology corrects off-angle installations and ensures proper alignment. Units are designed to remain attached even when machinery guards are removed. Offered in self-clinching, flaring, and floating mounting...
Read More »
PEM-® Type HFHB Busbar-® Clinch Studs Provide Superior Electrical/Mechanical Attachment
PEM-® Type HFHB BUSBAR-® self-clinching studs provide ideal solutions for applications demanding superior electrical/mechanical attachment points in copper. These phosphor bronze externally threaded fasteners offer twice the conductivity of conventional carbon steel studs. The RoHS-compliant studs install permanently in copper sheets as thin as .050 /1.3mm and have been engineered for...
Read More »Access Hardware with Added Functionality: Pem-® Metal/Plastic Panel Fasteners Offer Color-Coding Capabilities
PEM-® metal/plastic access hardware ordered with custom ABS cap colors allow for color-coding or matching in an assembly to offer specific practical functions. The color caps can serve as visual identifiers to flag components, designate restricted or limited access areas, or correlate with equipment instructions. They can also be specified to match the color of a panel or other component or to...
Read More »
Blind Threaded Inserts offer one-sided installation.
Offered in aluminum, brass, steel, and stainless steel, AtlasÃ-® SpinTiteÃ-® Inserts install from accessible front side of panel with only single mating screw required to complete final component attachment. Units serve as alternatives to tapped holes, weld nuts, rivets, and self-drilling or tapping screws and can promote close-to-edge mounting. Suited for panels of any hardness as thin...
Read More »
Blind Threaded Inserts suit high-load attachment jobs.
Heavy-duty AtlasÃ-® MaxTiteÃ-® inserts provide permanent metal threads in blind attachment applications where only one side of workpiece is accessible for fastener installation and final component assembly. During fastener installation, several thin sheets of dissimilar materials can be assembled and then final components can be attached. Available types include flathead and countersunk,...
Read More »
Self-Clinching Fasteners permanently join 2 metal sheets.
PEMÃ-® SpotFast(TM) fasteners create permanent flush-attachment connection without protrusions on either side. They can attach 2 metal sheets too thin to weld (as thin as .030 in.), fasten sheets of unequal thicknesses, or join dissimilar metals unable to be welded. RoHS-compliant, steel fasteners install smooth with top sheet and flush, sub-flush, or blind with bottom sheet. Rotational...
Read More »New PEM-® VariMount-® Video - âProviding Solutions for Compositesâ
Since its introduction to the market, the VariMount® Bonding Fastener has revolutionized fastening applications for composite materials in the Automotive, Electronics, Aerospace and several other industries. Click here (http://www.pemnet.com/fastening-products/pem-varimount-fastening-system/) to watch our new video on how the VariMount fastener has helped many of our customers bring their...
Read More »PennEngineering-® to Exhibit at Fabtech 2017 in Chicago - Booth#A5002
PennEngineering® is excited about exhibiting at Fabtech International at McCormick Place, November 6 – 9, 2017 in Chicago, Illinois. Our exhibit, booth #A5002, will feature our new manual air-over-oil PEMSERTER® Series 2000® base fastener-insertion press. The air-over-oil actuating system provides short cycle time for increased productivity. We are also demonstrating our PEMSERTER® Series...
Read More »PennEngineering-® Initiates Patent and Trademark Infringement Action Against Dongguan Fenggang Pinconn Hardware Factory and Enforces Preliminary Injunction Against Pinconn
LAS VEGAS, NV – PennEngineering® (Danboro, PA) has initiated a federal infringement action against Dongguan Fenggang Pinconn Hardware Factory (trading as “Pinconn”). The complaint alleges patent infringement, trademark infringement, false designation of origin, and counterfeiting under United States law, as well as common law trademark infringement and unfair competition. PennEngineering...
Read More »PennEngineering-® Expands Operations in Ireland with New 80,000-Square-Foot Facility
PennEngineering®, a global leader in fastening technologies, has expanded operations in Galway, Ireland, with a new 80,000-square-foot manufacturing and research facility. The new facility becomes the primary manufacturing site for all PEM® self-clinching fastener products sold throughout Europe. In addition, the site houses a newly created Research and Development Center and an Application...
Read More »Rocky Pinheiro Joins PennEngineering-® as Global Vice President of Quality
DANBORO, PA, USA, July 20, 2017 – Rocky Pinheiro has joined PennEngineering® as Global Vice President of Quality, it was announced today by the Company. Pinheiro will be responsible for driving enterprise-wide quality systems improvement, excellence, and evolution and will function as a corporate source matter expert with PennEngineering’s established quality teams in each plant and selling...
Read More »PennEngineering-® Acquires Whitesell-® Formed Components and Whitesell-® Canada
DANBORO, PA, June 28, 2017 - PennEngineering® is pleased to announce the acquisition of Whitesell® Formed Components, with operations in Waterford, Romulus and Novi, MI, and Whitesell® Canada in Vaughan, Ontario, Canada. Whitesell Formed Components, also known as FabriSteel®, is a leading manufacturer of piercing, clinching, and riveting fasteners for the automotive market. “We are excited...
Read More »PennEngineering-® Marks 75 Years as Innovative Leader in Fastening Technologies
PennEngineering® (Danboro, PA, USA) is celebrating 75 years in 2017 as a global leader in innovative fastening technologies and solutions. Founded in 1942, the Company pioneered the first-ever self-clinching fastener for thin metal assemblies and has since realized dramatic growth from an increasingly diverse portfolio of fastening products and relentless focus on customers and world-class...
Read More »ATLAS-® Products Division of PennEngineering-® Wins a First-Place Supplier Award for 2016 from Fastenal-®
The ATLAS® Products division of PennEngineering® has won a first-place Supplier Award for 2016 from Fastenal®, the largest distributor of threaded fasteners in North America. The award in the “Direct Ship” class of Fastenal’s annual “Supplier Scorecard” program recognizes outstanding performance according to a variety of critical operational procedures. ATLAS ultimately was ranked...
Read More »Upcoming Tradeshow & Conference Session
PennEngineering will be exhibiting at the upcoming FABTECH show. Come visit us at Booth #C14043. Fasteners will be on display and presses will be operating in the booth. Go to register. We will also participate in a conference session: Where: FABTECH, Las Vegas, Nevada When: Wednesday, November 16, 2016: 1:30 PM - 3:30 PM, Room: N223-N224 What: S31: In-Die Technologies Exploring the Benefits of...
Read More »Pennengineering-® Enters Into Agreement to Acquire Heyco-® Products Inc.
PennEngineeringÃ-® (Danboro, PA, USA) has entered into an agreement to acquire HeycoÃ-® Products Inc. (Toms River, NJ, USA), it was announced by both companies. Terms of the agreement were undisclosed and no changes are anticipated regarding Heyco’s operations, facilities, and employees. The acquisition is expected to expand sales growth opportunities for both companies. Heyco Products...
Read More »