Interpower Corp.

Inlets and Outlets offer dust and moisture resistance.

Inlets and Outlets offer dust and moisture resistance.

High Power Pin and Sleeve Connection Devices are suited for equipment rated from 16-32 A with service at 120-250 Vac. In 3-pin configuration, units offer 16/20 A or 30/32 A rating, with 4 and 6 hr ground pin position. Devices featuring 4 pins are rated 20-125 A and come with 6, 7, 9, and 12 hr ground pin position. Five-pin units are rated 20-125 A with 6 and 9 hr ground pin position. All offer IP...

Read More »
Molded Power Cords are offered in 45-

Molded Power Cords are offered in 45-

Angled NEMA 5-15 power cords are suited for equipment rated up to 15 A with service at 125 Vac. UL- and CSA-approved products are available with 3 x 18, 3 x 16, and 3 x 14 AWG cable in stock lengths of 6, 8, and 10 ft. Cords are configured with one of 8 different angles of NEMA 5-15 plug and terminated with bare conductor wires. Custom lengths, special packaging, and color options are available.

Read More »
Molded Cordsets suit equipment used in Argentina.
Electrical Equipment & Systems

Molded Cordsets suit equipment used in Argentina.

Argentina cordsets are for equipment rated up to 10 A with service at 250 Vac. IRAM/SCI&M-approved cordsets are available with 1.00 mmÂ-² cable in stock lengths of 2.5 m. Cordsets are configured with Argentina plug and terminated with choice of 5 IEC 60320 C13 connectors, including left, right, up, down, and straight, enabling designers to reduce clearance space required behind or under...

Read More »
Molded Power Cords feature BS1363 style plug.

Molded Power Cords feature BS1363 style plug.

United Kingdom/Ireland Power Cords are intended for equipment rated from 3-13 A with service at 250 Vac. They are ASTA approved and available with 3, 5, 10, or 13 Amp BS 1362 fuse. Cords come with 0.75, 1.00, or 1.50 mmÂ-² HAR cable in stock lengths of 2.5 meters. Applications include equipment designed for use in United Kingdom, Ireland, Singapore, and other international areas using BS1363...

Read More »
Accessory Power Strip has inlet and connector locks.

Accessory Power Strip has inlet and connector locks.

Interpower 5-position Accessory Power Strip, model 852J2E28, enables equipment manufacturers to supply power to system accessories and peripherals while conforming to worldwide electrical standards. With service to 15 A @ 250 Vac, mountable power strip is constructed with 5 IEC 60320 standard Sheet F outlets, one IEC 60320 C20 inlet, and SPST circuit breaker. Six connector locks secure...

Read More »
Australian Power Cords feature added insulation.

Australian Power Cords feature added insulation.

Interpower(TM) Australian power cords and cordsets include partially insulated pins to minimize safety hazards and to comply with AS/NZS 3112:2000 fifth edition standard. They are rated up to 10 A with service at 230 Vac. Custom lengths and packaging options available.

Read More »
Hospital-Grade Plug has DEMKO approval.

Hospital-Grade Plug has DEMKO approval.

Interpower(TM) Danish Hospital-Grade Plug, Part No. 88010940, is rated 13 A at 250 Vac. It mates with hospital-grade socket, which is designed with slightly different shaped openings allowing only hospital plug, not standard Danish plug, to protect main circuit in specific medical settings.

Read More »
Power Strip offers service to 10 A at 250 Vac.

Power Strip offers service to 10 A at 250 Vac.

Four-position Model 852J2D27 Accessory Power Strip consists of four IEC 60320 standard Sheet F outlets, one IEC 60320 C14 inlet, and SPST circuit breaker. Connector locks secure connections, preventing accidental power interruption. Power strip carries UL listing, CSA certification, VDE approval, and CE marking.

Read More »
Molded Cordsets are NEMA rated.
Electrical Equipment & Systems

Molded Cordsets are NEMA rated.

Interpower(TM) Molded Cordsets are for equipment rated up to 20 A with service at 250 Vac. They are configured with NEMA 6-20 plug, and are terminated with straight, left, or right angled IEC 60320 C19 connectors. Cordsets are available with 2.5 m of 3 x 12 AWG, SJT cable. They are UL listed and CSA certified.

Read More »
Power Distribution Unit provides 12 outlets in slim design.
Communication Systems & Equipment

Power Distribution Unit provides 12 outlets in slim design.

With 1U size, 19 in. rack-mount Interpower(TM) Model 852Q2L18 provides domestic and international single-phase power to equipment racks. Unit is equipped with IEC 60320 Sheet F outlets with C20 inlet and is rated at 16 A for service at 250 Vac. It comes with lighted rocker circuit breaker and is UL recognized, CSA certified, and TUV approved with CE mark. Interpower IEC 60320 Universal Jumper...

Read More »

All Topics