PCB Piezotronics, Inc.
Depew, NY 14043
Triaxial Force Sensors measure vehicle chassis dynamics.
Series 260A triaxial force sensors measure dynamic and quasi-static forces in 3 orthogonal directions. They feature measuring ranges of 500-4,000 lb in X and Y directions and 1,000-10,000 lb in Z direction. Single axis models are also available. These sensors are used to study vehicle chassis dynamics at interfaces between shock absorbers, struts, or other chassis components.
Read More »Force Sensors suit biomedical tissue product testing.
High sensitivity, Miniature Series 209C Quartz Piezoelectric Force Sensors measure dynamic compression and tensile forces. Built-in microelectronics convert high impedance charge to low impedance voltage, eliminating noise associated with charge amplifiers and allowing broadband resolution 20 Ã-µlb rms from sensor. Featuring ICPÃ-® voltage output, products offer sensitivity of 2,200 mV/lb...
Read More »Torque Transducers suit aerospace hydraulic pumps/motors.
Rotating torque transducers utilize non-contact, rotary transformers for sending excitation voltage to, and receiving measurement signals from, strain gage instrumented rotating sensor element. Flange and splined shaft design conforms to AND 10262 and 20002. In addition to torque output signal, optional pickup provides output proportional to speed and optional K type thermal couple to monitor...
Read More »Accelerometers work in high-temperature environments.
Hermetically sealed in titanium housing, stud-mounted Models 357B53 and 357B54 operate in temperatures from -95 to +500Ã-
Read More »Externally Polarized Microphone has 50 mV/Pa sensitivity.
Model 377B41 is -½ in. Free Field type microphone that features dynamic range of 15-146 dB (A) re 20 -µPa and frequency range from 3.15-20,000 Hz -±2 dB. Condenser microphone has +302-°F operating temperature range, and, when combined with PCB-® Model 426A30 preamplifier, operates from 200 V power supply for externally polarized microphones.
Read More »Accelerometers measure vibration in 3 orthogonal directions.
Triaxial ICPÃ-® Ceramic Shear Accelerometers, Series 354B, includes 3 models, each with 3 hermetically sealed, titanium-cased, single-axis sensors mounted on hard anodized mounting block. Each sensor features three 10-32 coaxial connectors. Offering sensitivity of 2.5, 10, and 100 mV/g with measurement range of 2,000, 500, and 50 g, respectively, accelerometers include microelectronic signal...
Read More »
Triaxial Accelerometer suits limited-space applications.
Hermetically sealed in titanium housing, 356A13 Miniature Ceramic Shear ICPÃ-® accelerometer measures 0.25 x 0.25 x 0.25 in. and weighs 0.04 oz. Integral twisted quad cable and conductor shielded cable offer total running length of 10 ft for routing around components in tight spaces. With sensitivity of 5 mV/g and measurement range of Ã-
Read More »
In-Line Rotary Torque Sensors offer 16-bit resolution.
Suited for automotive powertrain dynamometers, TORKDISCÃ-® Series 5300 features on-board electronic module that converts torque signals into high-speed digital representation. Digital data is transmitted to non-contacting pick-up loop with no risk of noise or data corruption. Remote receiver converts digital data to analog output voltage, frequency output, and serial digital output. Units...
Read More »
Accelerometers provide modal analysis of large rigid bodies.
Miniature Models 356A30, A31, A34, and A35 are 0.45 in. cube-shaped accelerometers that simultaneously measure vibration in 3 orthogonal directions. They cover range of 5-100 mV/g with corresponding measurement range of 1,000-50 g peak. Models 356A30 and A31 use 8-32 4-pin mini electrical connector, while Models 356A34 and A35 use 1/4-28 4-pin connector with positive keyway. Adhesive-mounted,...
Read More »
Preamplifier features built-in, 20 Hz high-pass filter.
Featuring pre-polarized design, Model 426A10 is a Ã-½ in. preamplifier that operates from ICPÃ-® sensor power. Built-in filter minimizes unwanted low frequency sounds that may saturate analyzer. Unit terminates in BNC connector and uses standard coaxial cable. Operating temperature is -40 to +80Ã-
Read More »