NORMA Group
Auburn Hills, MI 48326
Clamp ensures fluid connections withstand demanding environments.
Used for fluid connections in high-pressure applications using rubber or silicone hoses, Breeze Super-Seal clamp featuresÂ- high-pressure, dual-seal profile and provides adjustability via worm-drive closure mechanism. Recessed hardware attachments promote continuous 360° lines of sealing, while convex-shaped band promotes spring force. Offered with or without Belleville washers, this...
Read More »Quick Connector adds security for fuel and urea systems.
Available in 0° and 90° versions, NORMAQUICK SSL Quick Connector is intended for use on fuel and NOX-reducing diesel urea systems in passenger, commercial, and off-highway vehicles. Secondary latch ensures service personnel can make secure connection while also allowing for quick disconnection. Made of recyclable materials, connectorÂ- features low fluid permeability and...
Read More »
NORMA® Exhaust Clamp Adds Pre-positioner
WIXOM, MICH APRIL 25, 2006... The NORMACONNECT® SEC (Spherical Exhaust Clamp) compensates for misalignments, is guaranteed against leakage, and is now available with a pre-positioner that simplifies exhaust pipe assembly. The NORMACONNECT® SEC provides superior angular compliance, compensating for misalignment of up to 5°. On one leading North American sport utility vehicle, it...
Read More »
Connectors and Tubing keep crankcase lines from freezing.
Heated NORMAQUICK® V2 quick-connector and NORMAFLEX® plastic tubing prevent condensation in crankcase ventilation lines from freezing. Tubing can be heated throughout or concentrated in problem areas. Connector is available in various sizes in straight and 90° configurations, while smooth or corrugated tubing is offered with single- and multi-layer construction.
Read More »
Exhaust Clamps compensate for misalignments.
NORMACONNECT® SEC Swivel Exhaust Clamps are available in diameters from 50-75 mm in 5 mm increments. Spherical design holds pipes without slippage or damage, even under high axial loads. Corrosion-resistant, stainless steel units feature carbon steel screw and trunnions. They compensate for misalignments up to 8°, and are guaranteed not to leak more than 2 liters per minute when...
Read More »
Low-Emission Tube reduces vapor permeation.
Able to reduce permeation in automotive vapor lines by up to 80%, NORMAFLEX® LET 10 features 3-layer, polyester-based design. All materials are flourine-free. Product is thermoformed to customer's desired length and diameter. NORMAQUICK® 2K (2-shot) spigot can be incorporated into assembly instead of HDPE spigot when low permeation is important. Corrugated tubing is available for...
Read More »
Low-Profile Clamps fit in tight spaces.
Stainless steel NORMACLAMP® Cobra hose clamps have one-piece design that can be closed around hose using manual or pneumatic pliers. Available in 7, 8, and 9 mm bandwidths with various diameters, units are color coded for identification. Maintenance-free, reusable products are suited for automotive air and fuel systems, washing machines, food processing, and irrigation systems.
Read More »
Worm-Drive Clamps reduce friction with smooth band.
TORRO® hose clamps eliminate sharp edges and welds and are available with built-in spring, which improves clamping force and destruction torque while compensating for compression set. Band widths include 9 mm in aluminum-zinc and 12 mm in stainless steel. Aluminum-zinc offers corrosion resistance and withstands exposure to salt spray for 144 hours without red rust. Combination head screw...
Read More »
Pipe Clamps suit light-duty applications.
RLGU pipe clamps are made of lightweight aluminum-zinc with 12 mm band width in loop configuration. They are suitable for securing ducts, hoses, cables, and wiring harnesses, as well as pipes. For applications requiring dampening of noise and vibration, such as automotive and heavy truck, clamps can be ordered with rubber sleeve.
Read More »
Hose Clamp triples band tension.
Mechanically interlocked NORMACLAMP® GBS M, made of lightweight aluminum-zinc, has rounded edges to minimize hose abrasion. It is offered in 4 bandwidths, with diameters ranging from 1 to 6 in. in increments of 1/4 in. Diameters up to 10 in. are also available. No Chromium VI is used in manufacturing of clamp or hex bolt. Clamp is used to contain high pressure or suction in municipal...
Read More »
Clamp ensures fluid connections withstand demanding environments.
Used for fluid connections in high-pressure applications using rubber or silicone hoses, Breeze Super-Seal clamp featuresÂ- high-pressure, dual-seal profile and provides adjustability via worm-drive closure mechanism. Recessed hardware attachments promote continuous 360° lines of sealing, while convex-shaped band promotes spring force. Offered with or without Belleville washers, this...
Read More »Quick Connector adds security for fuel and urea systems.
Available in 0° and 90° versions, NORMAQUICK SSL Quick Connector is intended for use on fuel and NOX-reducing diesel urea systems in passenger, commercial, and off-highway vehicles. Secondary latch ensures service personnel can make secure connection while also allowing for quick disconnection. Made of recyclable materials, connectorÂ- features low fluid permeability and...
Read More »
NORMA® Exhaust Clamp Adds Pre-positioner
WIXOM, MICH APRIL 25, 2006... The NORMACONNECT® SEC (Spherical Exhaust Clamp) compensates for misalignments, is guaranteed against leakage, and is now available with a pre-positioner that simplifies exhaust pipe assembly. The NORMACONNECT® SEC provides superior angular compliance, compensating for misalignment of up to 5°. On one leading North American sport utility vehicle, it...
Read More »
Connectors and Tubing keep crankcase lines from freezing.
Heated NORMAQUICK® V2 quick-connector and NORMAFLEX® plastic tubing prevent condensation in crankcase ventilation lines from freezing. Tubing can be heated throughout or concentrated in problem areas. Connector is available in various sizes in straight and 90° configurations, while smooth or corrugated tubing is offered with single- and multi-layer construction.
Read More »
Exhaust Clamps compensate for misalignments.
NORMACONNECT® SEC Swivel Exhaust Clamps are available in diameters from 50-75 mm in 5 mm increments. Spherical design holds pipes without slippage or damage, even under high axial loads. Corrosion-resistant, stainless steel units feature carbon steel screw and trunnions. They compensate for misalignments up to 8°, and are guaranteed not to leak more than 2 liters per minute when...
Read More »
Low-Emission Tube reduces vapor permeation.
Able to reduce permeation in automotive vapor lines by up to 80%, NORMAFLEX® LET 10 features 3-layer, polyester-based design. All materials are flourine-free. Product is thermoformed to customer's desired length and diameter. NORMAQUICK® 2K (2-shot) spigot can be incorporated into assembly instead of HDPE spigot when low permeation is important. Corrugated tubing is available for...
Read More »
Low-Profile Clamps fit in tight spaces.
Stainless steel NORMACLAMP® Cobra hose clamps have one-piece design that can be closed around hose using manual or pneumatic pliers. Available in 7, 8, and 9 mm bandwidths with various diameters, units are color coded for identification. Maintenance-free, reusable products are suited for automotive air and fuel systems, washing machines, food processing, and irrigation systems.
Read More »
Worm-Drive Clamps reduce friction with smooth band.
TORRO® hose clamps eliminate sharp edges and welds and are available with built-in spring, which improves clamping force and destruction torque while compensating for compression set. Band widths include 9 mm in aluminum-zinc and 12 mm in stainless steel. Aluminum-zinc offers corrosion resistance and withstands exposure to salt spray for 144 hours without red rust. Combination head screw...
Read More »
Pipe Clamps suit light-duty applications.
RLGU pipe clamps are made of lightweight aluminum-zinc with 12 mm band width in loop configuration. They are suitable for securing ducts, hoses, cables, and wiring harnesses, as well as pipes. For applications requiring dampening of noise and vibration, such as automotive and heavy truck, clamps can be ordered with rubber sleeve.
Read More »
Hose Clamp triples band tension.
Mechanically interlocked NORMACLAMP® GBS M, made of lightweight aluminum-zinc, has rounded edges to minimize hose abrasion. It is offered in 4 bandwidths, with diameters ranging from 1 to 6 in. in increments of 1/4 in. Diameters up to 10 in. are also available. No Chromium VI is used in manufacturing of clamp or hex bolt. Clamp is used to contain high pressure or suction in municipal...
Read More »
