Nordson Corporation
Duluth, GA 30097

View the Highest Quality X-ray Imaging from Nordson DAGE at SMTAI
Aylesbury, Buckinghamshire, UK -- Nordson DAGE, a division of Nordson Corporation (NASDAQ: NDSN), today announced that it will exhibit in Booth #606 at SMTA International, scheduled to take place Sep. 30 - Oct. 1, 2014 at the Donald Stephens Convention Center in Rosemont, IL. The company’s technical experts will be available to demonstrate the XD7600NT Diamond FP X-ray system. The Nordson DAGE...
Read More »
Slot Applicator maximizes edge banding production efficiency.
Integrating with variety of OEM systems and software, EB 60 Flex features volume compensation, which eliminates introduction of air or adhesive squeeze-out during coating width changes so accurate, consistent adhesive coating is applied. Adhesive volume is equalized inside applicator so no purging is needed between width changes. Motorized version automatically adjusts coating width using input...
Read More »
Adhesive Tank Melters simplify use of reactive PUR adhesives.
Aiding and enabling polyurethane (PUR) adhesive use in manufacturing and assembly, VersaPUR™ systems- have smooth, non-stick release-coated surfaces and- tiltable tank. Graphic controls simplify programming and provide visibility of system status.- Along with integrated or external inert gas supply, additional features include optional sensor and warning for tank level, various...
Read More »
Wafer X-Ray Metrology System offers high-throughput automation.
Able to be used as integral part of fabrication and packaging of integrated circuits or as part of QC and product acceptance, XM8000 provides automated, high-throughput X-ray metrology and defect review system for both optically hidden and visible features of TSVs, 2.5D and 3D IC packages, MEMS, and wafer bumps. Non-destructive, in-line wafer measurement covers voiding and fill levels, overlay,...
Read More »
Single-Screw Single-Barrel Retrofit supports co-injection.
Available as option on new injection molding machines and as retrofit, Twinshot™ System replaces standard screw and barrel with counterparts designed to produce 2-component part in single molding cycle with single screw, single shot, and single recovery. System is limited to A-B-A sandwich structures and cannot be used for hot-runner molding or on equipment with L/D ratios less than 20:1....
Read More »
Gear Pump/Screen Changer Support Cart aids deployment, maintenance.
Single movable cart, combining screen changer and gear pump, simplifies deployment of- said components in extrusion line while- minimizing floor space occupancy and facilitating access for replacement of filter media. While fixed casters permit transverse-direction movement into and out of extrusion line, precisely aligned movement in extrusion direction is provided by rails installed on floor....
Read More »
Filter Cartridge increases throughput in melt filtration.
Suited for screen changers and melt filters, filter cartridge- has stable structure that prevents pressure loss and deformation of steel filter fabric (screen medium) caused by mechanical stresses encountered during production startup. Rheological optimization of cartridge design eliminates stagnation zones and makes possible 100% utilization of open filter area. Symmetrical structure of filter...
Read More »At K 2013: Bimetallic Barrel Alloy Provides Greater Corrosion Resistance than Iron-Based Alloy Now Standard in Europe
40% Greater Chromium Content Is Key to Enhanced Corrosion Resistance of Nordson XALOY’s X220™ Inlay for Extrusion and Injection Components NEW CASTLE, PA, U.S.A., -- A new bimetallic barrel alloy developed by Nordson XALOY exhibits greater corrosion resistance than comparable general-purpose iron-based inlays currently standard in Europe, providing a longer working life, increased...
Read More »
Cast Film Die incorporates internal deckle.
With internal deckle, Contour™ Cast Film Die enables extrusion processors to achieve speed and precision without incurring downtime for changing product width. Unit has sculpted configuration that is smaller and tapered at ends, offsetting differences in die-body deflection across width of die that are caused by pressure of molten polymer that extruder continuously charges into...
Read More »
Hydraulic Power Unit activates slide plates or valve pistons.
Utilizing- 2 pumps that are capable of operating simultaneously, Hydraulic System overcomes resistance during slide plate or diverter valve operation without need for pressurized hydraulic oil accumulator. Pumps are supplied from single oil reservoir and are driven by single motor. Volume flow pump draws on larger volume of oil to provide fast movement when level of resistance is low,...
Read More »
View the Highest Quality X-ray Imaging from Nordson DAGE at SMTAI
Aylesbury, Buckinghamshire, UK -- Nordson DAGE, a division of Nordson Corporation (NASDAQ: NDSN), today announced that it will exhibit in Booth #606 at SMTA International, scheduled to take place Sep. 30 - Oct. 1, 2014 at the Donald Stephens Convention Center in Rosemont, IL. The company’s technical experts will be available to demonstrate the XD7600NT Diamond FP X-ray system. The Nordson DAGE...
Read More »
Slot Applicator maximizes edge banding production efficiency.
Integrating with variety of OEM systems and software, EB 60 Flex features volume compensation, which eliminates introduction of air or adhesive squeeze-out during coating width changes so accurate, consistent adhesive coating is applied. Adhesive volume is equalized inside applicator so no purging is needed between width changes. Motorized version automatically adjusts coating width using input...
Read More »
Adhesive Tank Melters simplify use of reactive PUR adhesives.
Aiding and enabling polyurethane (PUR) adhesive use in manufacturing and assembly, VersaPUR™ systems- have smooth, non-stick release-coated surfaces and- tiltable tank. Graphic controls simplify programming and provide visibility of system status.- Along with integrated or external inert gas supply, additional features include optional sensor and warning for tank level, various...
Read More »
Wafer X-Ray Metrology System offers high-throughput automation.
Able to be used as integral part of fabrication and packaging of integrated circuits or as part of QC and product acceptance, XM8000 provides automated, high-throughput X-ray metrology and defect review system for both optically hidden and visible features of TSVs, 2.5D and 3D IC packages, MEMS, and wafer bumps. Non-destructive, in-line wafer measurement covers voiding and fill levels, overlay,...
Read More »
Single-Screw Single-Barrel Retrofit supports co-injection.
Available as option on new injection molding machines and as retrofit, Twinshot™ System replaces standard screw and barrel with counterparts designed to produce 2-component part in single molding cycle with single screw, single shot, and single recovery. System is limited to A-B-A sandwich structures and cannot be used for hot-runner molding or on equipment with L/D ratios less than 20:1....
Read More »
Gear Pump/Screen Changer Support Cart aids deployment, maintenance.
Single movable cart, combining screen changer and gear pump, simplifies deployment of- said components in extrusion line while- minimizing floor space occupancy and facilitating access for replacement of filter media. While fixed casters permit transverse-direction movement into and out of extrusion line, precisely aligned movement in extrusion direction is provided by rails installed on floor....
Read More »
Filter Cartridge increases throughput in melt filtration.
Suited for screen changers and melt filters, filter cartridge- has stable structure that prevents pressure loss and deformation of steel filter fabric (screen medium) caused by mechanical stresses encountered during production startup. Rheological optimization of cartridge design eliminates stagnation zones and makes possible 100% utilization of open filter area. Symmetrical structure of filter...
Read More »At K 2013: Bimetallic Barrel Alloy Provides Greater Corrosion Resistance than Iron-Based Alloy Now Standard in Europe
40% Greater Chromium Content Is Key to Enhanced Corrosion Resistance of Nordson XALOY’s X220™ Inlay for Extrusion and Injection Components NEW CASTLE, PA, U.S.A., -- A new bimetallic barrel alloy developed by Nordson XALOY exhibits greater corrosion resistance than comparable general-purpose iron-based inlays currently standard in Europe, providing a longer working life, increased...
Read More »
Cast Film Die incorporates internal deckle.
With internal deckle, Contour™ Cast Film Die enables extrusion processors to achieve speed and precision without incurring downtime for changing product width. Unit has sculpted configuration that is smaller and tapered at ends, offsetting differences in die-body deflection across width of die that are caused by pressure of molten polymer that extruder continuously charges into...
Read More »
Hydraulic Power Unit activates slide plates or valve pistons.
Utilizing- 2 pumps that are capable of operating simultaneously, Hydraulic System overcomes resistance during slide plate or diverter valve operation without need for pressurized hydraulic oil accumulator. Pumps are supplied from single oil reservoir and are driven by single motor. Volume flow pump draws on larger volume of oil to provide fast movement when level of resistance is low,...
Read More »