Newstripe, Inc.
Unit F
Aurora, CO 80011

Aerosol Can Disposal System mounts on any 30 or 55 gal drum.
Accommodating up to 3 aerosol cans, AEROVENT 3 punctures and drains them in less than 10 sec. It has non-sparking design that includes cobalt piercing tips and anti-static grounding cable. Unit totally encloses cans being punctured, ensuring operator safety, while vent filter eliminates VOC and hydrocarbons from being released into atmosphere and being inhaled by operator. After being processed...
Read More »Oil Filter Crusher is available with automatic timer.
Designed for hands-free crushing where users need only insert oil filter, set timer, and walk away, FilterFlat converts used oil filters from EPA hazardous material into recyclable metal and oil. It connects to shop air and can reduce 9 in. filters to less than 2 in. in 45 sec by applying up to 24,000 lb of force. Drain hose directs removed oil to separate end-user-chosen waste container, and...
Read More »In-Drum Compactor helps dispose of/recycle materials.
Pack-Master in-drum compactor is suited for disposing of or recycling materials such as paper, paint booth filters, aluminum cans, absorbents, and disposable clothes. Manually operated machine generates 4,000 lb of force for compaction ratio of up to 4-to-1. It is manufactured from structural steel and compacts drum of material via operation of ram lever. Accessories include roll-out base, split...
Read More »In-Drum Compactor has lever-operated design.
Pack-Master generates 4,000 lb of force to aid in disposal or recycling of materials such as paper, paint booth filters, aluminum cans, absorbents, and disposable clothes. Manufactured from structural steel, unit is manually operated and has compaction ratio of up to 4:1. Pack-Master is also available in air-powered and air-powered, spark-resistant models with accessories such as Roll-out Base,...
Read More »Striping Machine uses inverted spray aerosol can.
Featuring all metal construction, NewAero produces 2-4 in. wide lines and holds up to 12 extra cans to stripe up to 3,000 ft of line, eliminating repeated trips for refilling. To change colors, user just exchanges aerosol can. Unit includes 8 in. semi-pneumatic tires and can be transported in car's trunk or utility vehicle. Suitable for parking lots, warehouses, and factory floors, NewAero is...
Read More »
Paint Striper can pump paint directly from 5 gal pail.
Featuring 100% transfer efficiency, Rollmaster 5000(TM) does not create any over spray, enabling use within 3 in. of obstacles. Integral peristaltic pump, driven by battery-powered, 12 V gear motor, squeezes paint through delivery hose so that paint does not come into contact with any pump component. This, along with disposable paint roller and hose, results in cleanup times of less than 5 min....
Read More »
Paint Striper sprays lines, curbs, car stops, and stencils.
Equipped with 4 hp Honda engine and 5 gal low-pressure tank, Bantam XL uses adjustable spray gun for 2-6 in. wide lines. Wetted section of spray gun disassemblies for cleanup, and unlike airless spray guns, entire gun can be rebuilt in field. Featuring dry weight of 125 lb, unit includes four, 10 in. pneumatic wheels for maneuverability.
Read More »
Paint Striper uses bulk paint instead of aerosol cans.
Designed for small, occasional jobs, SCOTSMAN Striper features four 8 in. wheels, loop handle with control lever, and pressure gauge. Adjustable spray head paints 2-6 in. lines, while instantaneous shut-off valve located at spray head eliminates dripping. Built from all welded steel with 4 gallon industrial-grade epoxy-coated tank, striper is available as basic unit or can be upgraded with...
Read More »
Disposal System processes aerosol cans.
Eliminating need to dispose of aerosol cans as hazardous waste, AEROVENT 3 enables cans to be recycled as scrap steel or discarded as regular trash. User inserts up to 3 aerosol cans, closes lid, and lowers handle. In less than 10 sec, system punctures and drains cans. Mounting on any 30- or 55-gal drum, system features non-sparking design with cobalt piercing tips and anti-static grounding...
Read More »
Paint Striper delivers 100% transfer efficiency.
When applying mandated low-VOC traffic paints, Rollmaster(TM) produces crisp line edges with no overspray. It incorporates adjustable pump spring tension, which accelerates priming and compensates for any pump hose wear. Product pumps paint directly from 1 gal can to application roller and uses peristaltic (squeeze) pump so that paint does not contact any pump component. Design also includes...
Read More »
Aerosol Can Disposal System mounts on any 30 or 55 gal drum.
Accommodating up to 3 aerosol cans, AEROVENT 3 punctures and drains them in less than 10 sec. It has non-sparking design that includes cobalt piercing tips and anti-static grounding cable. Unit totally encloses cans being punctured, ensuring operator safety, while vent filter eliminates VOC and hydrocarbons from being released into atmosphere and being inhaled by operator. After being processed...
Read More »Oil Filter Crusher is available with automatic timer.
Designed for hands-free crushing where users need only insert oil filter, set timer, and walk away, FilterFlat converts used oil filters from EPA hazardous material into recyclable metal and oil. It connects to shop air and can reduce 9 in. filters to less than 2 in. in 45 sec by applying up to 24,000 lb of force. Drain hose directs removed oil to separate end-user-chosen waste container, and...
Read More »In-Drum Compactor helps dispose of/recycle materials.
Pack-Master in-drum compactor is suited for disposing of or recycling materials such as paper, paint booth filters, aluminum cans, absorbents, and disposable clothes. Manually operated machine generates 4,000 lb of force for compaction ratio of up to 4-to-1. It is manufactured from structural steel and compacts drum of material via operation of ram lever. Accessories include roll-out base, split...
Read More »In-Drum Compactor has lever-operated design.
Pack-Master generates 4,000 lb of force to aid in disposal or recycling of materials such as paper, paint booth filters, aluminum cans, absorbents, and disposable clothes. Manufactured from structural steel, unit is manually operated and has compaction ratio of up to 4:1. Pack-Master is also available in air-powered and air-powered, spark-resistant models with accessories such as Roll-out Base,...
Read More »Striping Machine uses inverted spray aerosol can.
Featuring all metal construction, NewAero produces 2-4 in. wide lines and holds up to 12 extra cans to stripe up to 3,000 ft of line, eliminating repeated trips for refilling. To change colors, user just exchanges aerosol can. Unit includes 8 in. semi-pneumatic tires and can be transported in car's trunk or utility vehicle. Suitable for parking lots, warehouses, and factory floors, NewAero is...
Read More »
Paint Striper can pump paint directly from 5 gal pail.
Featuring 100% transfer efficiency, Rollmaster 5000(TM) does not create any over spray, enabling use within 3 in. of obstacles. Integral peristaltic pump, driven by battery-powered, 12 V gear motor, squeezes paint through delivery hose so that paint does not come into contact with any pump component. This, along with disposable paint roller and hose, results in cleanup times of less than 5 min....
Read More »
Paint Striper sprays lines, curbs, car stops, and stencils.
Equipped with 4 hp Honda engine and 5 gal low-pressure tank, Bantam XL uses adjustable spray gun for 2-6 in. wide lines. Wetted section of spray gun disassemblies for cleanup, and unlike airless spray guns, entire gun can be rebuilt in field. Featuring dry weight of 125 lb, unit includes four, 10 in. pneumatic wheels for maneuverability.
Read More »
Paint Striper uses bulk paint instead of aerosol cans.
Designed for small, occasional jobs, SCOTSMAN Striper features four 8 in. wheels, loop handle with control lever, and pressure gauge. Adjustable spray head paints 2-6 in. lines, while instantaneous shut-off valve located at spray head eliminates dripping. Built from all welded steel with 4 gallon industrial-grade epoxy-coated tank, striper is available as basic unit or can be upgraded with...
Read More »
Disposal System processes aerosol cans.
Eliminating need to dispose of aerosol cans as hazardous waste, AEROVENT 3 enables cans to be recycled as scrap steel or discarded as regular trash. User inserts up to 3 aerosol cans, closes lid, and lowers handle. In less than 10 sec, system punctures and drains cans. Mounting on any 30- or 55-gal drum, system features non-sparking design with cobalt piercing tips and anti-static grounding...
Read More »
Paint Striper delivers 100% transfer efficiency.
When applying mandated low-VOC traffic paints, Rollmaster(TM) produces crisp line edges with no overspray. It incorporates adjustable pump spring tension, which accelerates priming and compensates for any pump hose wear. Product pumps paint directly from 1 gal can to application roller and uses peristaltic (squeeze) pump so that paint does not contact any pump component. Design also includes...
Read More »