Pat Mooney, Inc.
Addison, IL 60101
Fully Automatic Circular Saw combines high speed and precision.
Used in production sawing applications that require straight cuts on bars, tubes, and structural work pieces, OMP K3 hydraulically driven upcut saw is controlled via servo feed system and cuts up to 7 in. dia. ZONE CUT Technology adjusts feed rate during cut, allowing cutting speeds from 20–200 rpm; gear box equipped with hydraulic brake removes all backlash from system; and operation is...
Read More »
Band Saw offers 13 in. capacity on hard-to-cut materials.
Used for cutting such materials such as inconel, stainless steel, and nickel alloys, Danobat DS3A employs 195 x 1.3 x 0.04 in. blade that operates from 46–295 rpm. Dual columns acceptÂ- blade tension, and material is clamped on both sides of blade to reduce burrs. Movable arm automatically adjusts to width of material and maintains optimum position relative to moving vice, and blade...
Read More »
Circular Cold Saw handles high volume sawing of steel tubes.
Equipped with Siemens PLC, automatic bundle loader, and gear-driven pivoting saw head, Matic 315 CM 1B achieves production rates up to 1,000 parts/hr. CM belt loader isÂ- designed to load bundles of tubes automatically up to 20 ft with max weight 8,800 lb. Clamping part on both sides of saw blade, horizontal vises ensure burr-free cut. Clamping pressure is adjustable so pressure can be...
Read More »
An Innovative Approach to Sawing and Material Flow - FMB Scorpio CNC Vertical Band Saw by PAT MOONEY INC.
The Scorpio CNC was developed to provide a unique solution for sawing longer cut lengths with opposing mitre cuts. Scorpio's massive saw head tilts left and right at a full 60 degrees and is controlled via CNC unit. The Scorpio's solution is the material optimization feature as well as a rotary material positioning system. This allows the Scorpio CNC Sawing System to process opposing...
Read More »
Bundling Systems form bundles of tubes up to 7,700 lb.
Controlled by PLC system, OMP Bundling Machines are suitable for every production environment, from hexagonal and square to rectangular bundles up to 7,700 lb. Each line can be configured with waste separation systems, sewage systems and water blow-pipe, weighing systems, and systems for printing labels to put on beam pipe. In addition, integrated transport system through pipe roller ways is...
Read More »
Cutoff System incorporates remnant reduction device.
Along with 15.5 hp induction motor that drives saw blade spindle via reduction gearbox, Nishijimax NHC-100ND Cutoff SystemÂ- comes with remnant reduction device to decrease amount of remnant in auto cycle. Feed rate is set automatically, input chip load is maintained via NC Saw Spindle Feed Axis, and constant torque is maintained throughout RPM range. Other features include...
Read More »
Automatic Cutoff Saws come in upcut and horizontal models.
Suited for aluminum and other non-ferrous metals, PMI-455 Series CE NC Automatic High Production Cutoff Saws have hydraulically driven saw blade feed for maximum saw blade stability. Worktable moves 2 mm forward and backward after cut is complete and saw blade is retracting to ensure smooth finish. To prevent distortion of thin wall profiles, saws feature pneumatic clamping system with adjustable...
Read More »Automatic Band Saw features software-programmable operation.
Danobat iDS 5A comes with Intellicut Software, whichÂ- stores material speed and feed information. Once these are set, operator only needs to select material grade and type of saw blade to automatically achieve proper blade speed and production parameters. This eliminates errors while promoting productivity. Designed for torsion-free travel, saw employs 15.5 hp motor...
Read More »
Precision Gear Drive Saws accurately cutting range of materials.
Intended for iron and steel applications, FMB Mitre Bandsaws combine advantages of circular cold saw, variable blade speeds from 52-396 fpm, and capacity of traditional bandsaw. Swivel saw head cuts 0° to 45° left and 0° to 60° right, while vise slides on linear guide rails facilitate setup of miter cuts. Blade size is 11 ft 3 in. x 1 in. x .035 in., and FMB Saturn+G+V...
Read More »Automatic Band Saw Machine uses twin Prismatic guide columns.
To ensure torsion-free travel through sawing range, Danobat CP520AF is equipped with main prismatic guide column that travels on linear rails and linear bearings, and support guide column that travels on free rollers. Hydraulic gripper vise positions material to proper cut length. With 25 ft, 2 in. x 2 1/8 in. x 0.063 in. band, machine offers cutting capacities of 20Â-½ in. round and 23 5/8...
Read More »
Fully Automatic Circular Saw combines high speed and precision.
Used in production sawing applications that require straight cuts on bars, tubes, and structural work pieces, OMP K3 hydraulically driven upcut saw is controlled via servo feed system and cuts up to 7 in. dia. ZONE CUT Technology adjusts feed rate during cut, allowing cutting speeds from 20–200 rpm; gear box equipped with hydraulic brake removes all backlash from system; and operation is...
Read More »
Band Saw offers 13 in. capacity on hard-to-cut materials.
Used for cutting such materials such as inconel, stainless steel, and nickel alloys, Danobat DS3A employs 195 x 1.3 x 0.04 in. blade that operates from 46–295 rpm. Dual columns acceptÂ- blade tension, and material is clamped on both sides of blade to reduce burrs. Movable arm automatically adjusts to width of material and maintains optimum position relative to moving vice, and blade...
Read More »
Circular Cold Saw handles high volume sawing of steel tubes.
Equipped with Siemens PLC, automatic bundle loader, and gear-driven pivoting saw head, Matic 315 CM 1B achieves production rates up to 1,000 parts/hr. CM belt loader isÂ- designed to load bundles of tubes automatically up to 20 ft with max weight 8,800 lb. Clamping part on both sides of saw blade, horizontal vises ensure burr-free cut. Clamping pressure is adjustable so pressure can be...
Read More »
An Innovative Approach to Sawing and Material Flow - FMB Scorpio CNC Vertical Band Saw by PAT MOONEY INC.
The Scorpio CNC was developed to provide a unique solution for sawing longer cut lengths with opposing mitre cuts. Scorpio's massive saw head tilts left and right at a full 60 degrees and is controlled via CNC unit. The Scorpio's solution is the material optimization feature as well as a rotary material positioning system. This allows the Scorpio CNC Sawing System to process opposing...
Read More »
Bundling Systems form bundles of tubes up to 7,700 lb.
Controlled by PLC system, OMP Bundling Machines are suitable for every production environment, from hexagonal and square to rectangular bundles up to 7,700 lb. Each line can be configured with waste separation systems, sewage systems and water blow-pipe, weighing systems, and systems for printing labels to put on beam pipe. In addition, integrated transport system through pipe roller ways is...
Read More »
Cutoff System incorporates remnant reduction device.
Along with 15.5 hp induction motor that drives saw blade spindle via reduction gearbox, Nishijimax NHC-100ND Cutoff SystemÂ- comes with remnant reduction device to decrease amount of remnant in auto cycle. Feed rate is set automatically, input chip load is maintained via NC Saw Spindle Feed Axis, and constant torque is maintained throughout RPM range. Other features include...
Read More »
Automatic Cutoff Saws come in upcut and horizontal models.
Suited for aluminum and other non-ferrous metals, PMI-455 Series CE NC Automatic High Production Cutoff Saws have hydraulically driven saw blade feed for maximum saw blade stability. Worktable moves 2 mm forward and backward after cut is complete and saw blade is retracting to ensure smooth finish. To prevent distortion of thin wall profiles, saws feature pneumatic clamping system with adjustable...
Read More »Automatic Band Saw features software-programmable operation.
Danobat iDS 5A comes with Intellicut Software, whichÂ- stores material speed and feed information. Once these are set, operator only needs to select material grade and type of saw blade to automatically achieve proper blade speed and production parameters. This eliminates errors while promoting productivity. Designed for torsion-free travel, saw employs 15.5 hp motor...
Read More »
Precision Gear Drive Saws accurately cutting range of materials.
Intended for iron and steel applications, FMB Mitre Bandsaws combine advantages of circular cold saw, variable blade speeds from 52-396 fpm, and capacity of traditional bandsaw. Swivel saw head cuts 0° to 45° left and 0° to 60° right, while vise slides on linear guide rails facilitate setup of miter cuts. Blade size is 11 ft 3 in. x 1 in. x .035 in., and FMB Saturn+G+V...
Read More »Automatic Band Saw Machine uses twin Prismatic guide columns.
To ensure torsion-free travel through sawing range, Danobat CP520AF is equipped with main prismatic guide column that travels on linear rails and linear bearings, and support guide column that travels on free rollers. Hydraulic gripper vise positions material to proper cut length. With 25 ft, 2 in. x 2 1/8 in. x 0.063 in. band, machine offers cutting capacities of 20Â-½ in. round and 23 5/8...
Read More »