Wurth Elektronik
Watertown, SD 57201
New WL-SMTW Series LEDs Emit Light of Wavelengths 450, 660 and 730 nm
Features photosynthetic photon flux of up to 0.94 µmol/s at a current of just 150 mA. Offers high efficiency, luminosity and minimal heat generation. Ideal for applications controlling plant growth through specific light mixtures.
Read More »
New WE-MAPI Power Inductors are Ideal for Use in High-Efficiency Power-Supply Systems
Offer self-screening construction that ensures the best possible EMC performance. Suitable for high-performance DC/DC converters with high efficiency for switching frequencies of up to 20 MHz. Comes with operating temperatures from -55 to +150 °C,.
Read More »
New Wireless Power Developer Kit Comes with 200 W Charger
Features I²C interface for sensors on receiver board, and radio modules can be connected on the transmitter board. Uses inductive energy transfer as communication channel. Offers transfer data from receiver device to charging station, bidirectional data transfer and combined with charging process.
Read More »
New SMT EMI Suppression Ferrites are AEC-Q200 Qualified
Feature Ni-Sn electrodes, very high current carrying capacity up to 6 A, and operating temperatures from -55 to +125ºC. Offer filter characteristics and low RDC that are suitable as data line filters and for decoupling the supply voltage. Applications include control signals, RS232, RS422 and DC/DC converters.
Read More »
New Buttons and Switches are Suitable as Reset Buttons or as Operating Elements in Membrane Keyboards
Available in WS-TASV and WS-TASU buttons, WS-SLSU slide switch and WS-RSTV series device on/off switch variants. WS-SLSU SPDT switch comes in horizontal design that is attached to outer edge of the PCB as SMT mountable component. WS-RSTV black rocker switch offered in 20.2 mm. diameter housing and is Ideal for housing assembly.
Read More »
New WE-RCIS Suppression Choke is AEC-Q200 Grade 1 Qualified
Available in four versions that is characterized by its high current-carrying capacity and very high saturation power. Offers operating temperature range of -40 to +150°C and provides large area solder connection. Suitable for integrated DC/DC converters, for low-consumption use and energy harvesting solutions, embedded systems, portable devices and automotive electronics applications.
Read More »
New OCVCSO SAW Oscillators Provide Noise Floor of 10dB to 15dB
Available in 400MHz, 800MHz and 1.2GHz frequencies that come in 25.4 x 22 x 13.2 mm. SMD package. Operate from 5V supply with power consumption of between 0.8W to 1W, has a 50Ω sine output and voltage control option. Offer stabilities down to ±2ppm over an operating temperature range of 0 to +50°C and are ideal for radars, simulators, communication systems and unmanned aerial vehicles (UAVs).
Read More »
New Signal Transformer Features Maximum Component Height of 2.9 mm
Used up to 1000Base-T applications with at least 350 µH inductance. Enables dimensions to be kept small at only 4.7 × 3.22 × 2.9 mm and offers an insulation voltage of 1,500 V / 1 min. Available in 350 µH, 120 µH, 300 µH and 2,000 µH versions for different applications.
Read More »
New Variable Step Down Micro Module Features Electromagnetic Compatibility
MagI³C-VDMM can be put to sleep using an additional PIN, which extends battery life. Designed for high efficiency in the low load range. Applications include the supply of interfaces, microcontrollers, microprocessors, DSPs and FPGAs.
Read More »
Würth Elektronik Offers Support for Developers of Charging Devices and Charging Stations
Charging e-bike batteries without a cable Waldenburg (Germany), 3 September 2019 – Wireless battery charging is a comfortable and maintenance-free affair. Companies wishing to tap these advantages for the market of e-bikes and other small electrical vehicles can now turn to Würth Elektronik for development and component support. For many years now, the supplier of electronic and...
Read More »
New WL-SMTW Series LEDs Emit Light of Wavelengths 450, 660 and 730 nm
Features photosynthetic photon flux of up to 0.94 µmol/s at a current of just 150 mA. Offers high efficiency, luminosity and minimal heat generation. Ideal for applications controlling plant growth through specific light mixtures.
Read More »Würth Elektronik Awarded by Mouser
Successful sales channel Waldenburg (Germany), 20 October 2020 – Mouser Electronics has awarded Joe Haukos of Würth Elektronik eiSos with the 2020 Best-in-Class Award. The honor was the highlight of a joint quarterly review, which highlighted the great success of Würth Elektronik products in the Mouser range: Würth Elektronik is one of the most prominent rising suppliers at Mouser and has...
Read More »
New WE-MAPI Power Inductors are Ideal for Use in High-Efficiency Power-Supply Systems
Offer self-screening construction that ensures the best possible EMC performance. Suitable for high-performance DC/DC converters with high efficiency for switching frequencies of up to 20 MHz. Comes with operating temperatures from -55 to +150 °C,.
Read More »Find The Right Components in Just a Few Clicks
Waldenburg (Germany), 23 September 2020 – As one of the leading manufacturers of electronic and electromechanical components, Würth Elektronik has been working for years with top semiconductor companies, such as Analog Devices, Infineon Technologies, and Texas Instruments to develop reference designs to help customers accelerate their projects. Würth Elektronik offers access to this online...
Read More »
New Wireless Power Developer Kit Comes with 200 W Charger
Features I²C interface for sensors on receiver board, and radio modules can be connected on the transmitter board. Uses inductive energy transfer as communication channel. Offers transfer data from receiver device to charging station, bidirectional data transfer and combined with charging process.
Read More »
New SMT EMI Suppression Ferrites are AEC-Q200 Qualified
Feature Ni-Sn electrodes, very high current carrying capacity up to 6 A, and operating temperatures from -55 to +125ºC. Offer filter characteristics and low RDC that are suitable as data line filters and for decoupling the supply voltage. Applications include control signals, RS232, RS422 and DC/DC converters.
Read More »
New Buttons and Switches are Suitable as Reset Buttons or as Operating Elements in Membrane Keyboards
Available in WS-TASV and WS-TASU buttons, WS-SLSU slide switch and WS-RSTV series device on/off switch variants. WS-SLSU SPDT switch comes in horizontal design that is attached to outer edge of the PCB as SMT mountable component. WS-RSTV black rocker switch offered in 20.2 mm. diameter housing and is Ideal for housing assembly.
Read More »Task Force for Medical Technology Manufacturers
Waldenburg (Germany), 17 April 2020 – In addition to comprehensive measures for the protection of employees and to ensure the ability to deliver, the Würth Elektronik eiSos Group has set up a task force to guarantee preferential supply to manufacturers of medical devices. As one of the largest European suppliers of electronic components, the Waldenburg based company thus wants to ensure that...
Read More »
New WE-RCIS Suppression Choke is AEC-Q200 Grade 1 Qualified
Available in four versions that is characterized by its high current-carrying capacity and very high saturation power. Offers operating temperature range of -40 to +150°C and provides large area solder connection. Suitable for integrated DC/DC converters, for low-consumption use and energy harvesting solutions, embedded systems, portable devices and automotive electronics applications.
Read More »Würth Elektronik Releases 2020 Custom Capabilities Catalog, Featuring New Bobbin and Toroidal Packages
Waldenburg (Germany), 28 February 2020 – Released to the public in January 2020, Würth Elektronik is proud to announce the publication of the newest Capabilities Catalog. This comprehensive catalog includes capabilities for the design of custom transformers, one of the focuses of the company. This catalog offers customers over 110 packages as the foundation for a custom design. Five new...
Read More »
