Mi-T-M

Gas Heater adds heat to cold water pressure washers.
HVAC

Gas Heater adds heat to cold water pressure washers.

Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes Â-½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as...

Read More »
Washwater Recycle System offers closed loop solution.

Washwater Recycle System offers closed loop solution.

Suited for rental facilities without access to sanitary sewer, WLP series Wash-Water Recycle System features 304 stainless steel 3-chamber tank with oil coalescing grids, sloped bottom for handling solids, and Â-¾ hp sump pump. Entire system is mounted on no-rust poly skids and provides max flow of up to 40 gpm. Other features include ORP/pH controller, NEMA 4 rated control panel, and corona...

Read More »
Metal Cutting Saw provides burr-free cutting.
Machinery & Machining Tools

Metal Cutting Saw provides burr-free cutting.

Featuring 7 in. blade diameter, Cool Cut® Saw cuts mild steel up to 5/16 in. thick, aluminum up to 3/8 in. thick, and stainless steel up to Â-¼ in. thick. Saw is powered by 3,500 rpm, 6.0 A/120 V motor, and offers high-strength zinc-plated steel base, guide handle with integrated guide edge, 45° bevel angle adjustment capacity, and soft comfort grip handle. Cover design collects...

Read More »
Electric Air Compressor features 2.0 hp, 120 V motor.
Fluid & Gas Flow Equipment

Electric Air Compressor features 2.0 hp, 120 V motor.

Portable, single-stage Model AC1-HE02-05M1 is constructed with aluminum oil-lubricated crankcase and aluminum head with cast iron cylinder. It features 5.0 gal twin tank design, powder-coated steel frame, rubber isolators, and protective pump-motor housing. With rubber handle for cushioned grip, hand-carry compressor includes quick connect fittings, stainless steel braided discharge hose, and...

Read More »
Cold Water Pressure Washers tackle indoor applications.

Cold Water Pressure Washers tackle indoor applications.

Job Pro Electric Series features 1.5-8.0 hp TEFC electric motors, direct-drive triplex piston pumps with ceramic plungers, and forged brass manifold. Units include 1 in. powder-coated steel handles and 36 in. lance with rubber grip. Professional-grade insulated trigger gun features safety lock-off, and non-marking hose with quick connects, swivel, and bend restrictors. Additional features include...

Read More »
Pressure Washer has lightweight aluminum frame.
Cleaning Products & Equipment

Pressure Washer has lightweight aluminum frame.

Gas powered CBA Series cold water belt drive pressure washers feature 9.0-13.0 hp Honda or Subaru engine, piston pump with ceramic plungers, and dual-cogged belt drive system. Designed for commercial applications in coastal areas where salt water may cause rust and corrosion, unit also includes 50 ft. non-marking pressure hose with quick connects, trigger gun with safety lock-off, as well as...

Read More »
Portable Air Compressors come in electric and gas models.
Fluid & Gas Flow Equipment

Portable Air Compressors come in electric and gas models.

Two-stage Air Compressors feature aluminum head and splash lubricated cast iron crankcase and cast iron cylinder. Electric model is equipped with 5.0 hp UL-listed electric motor, while gasoline model includes 8.0-9.0 hp Honda, Vanguard, or Subaru engine, pneumatic idle control, and pilot valve unloader. Both types feature 2 pneumatic tires with tubes and steel hubs, powder-coated 8 gal twin tank...

Read More »
Electric/Gasoline Air Compressors have portable design.
Fluid & Gas Flow Equipment

Electric/Gasoline Air Compressors have portable design.

Single-stage compressors have aluminum head, cast iron crankcase, 10 in. fly wheel, stainless steel braided discharge hose, and pneumatic tire. Dual gauges are provided for tank and outlet pressure, and manual drain valves facilitate maintenance. Integrated belt tightening system pulls engine straight to ensure constant belt alignment. Gasoline compressors include 5.5-7.0 hp motors, while...

Read More »
Pressure Washers target commercial industrial market.
Cleaning Products & Equipment

Pressure Washers target commercial industrial market.

Cold water Premium Series CW includes washers powered by 11.0, 13.0, and 16.0 hp Honda, Vanguard, and Subaru engines. They feature triplex ceramic plunger pump with brass manifold, thermal relief valve, stainless steel and brass unloader, water filter with clear sleeve, and dual cogged belt drive system to prevent slippage. Units include 50 ft of non-marking hose, trigger gun with safety...

Read More »
Cold Water Pressure Washers feature aluminum frame.

Cold Water Pressure Washers feature aluminum frame.

Available with 5.5-13.0 hp Honda or Subaru engine, Series CA includes direct-drive triplex piston pump with ceramic plungers, forged brass manifold, thermal relief valve, and stainless steel and brass unloader. Units are also equipped with 1 in. aluminum tube handles, 3/16 in. aluminum base plates, pneumatic tires, plus 50 ft non-marking pressure hose. Trigger gun features safety lock-off, 36 in....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers