Manchester Tool & Die, Inc.

Manchester Tool & Die Exhibiting at Fabtech
Food Processing & Preparation

Manchester Tool & Die Exhibiting at Fabtech

Manchester Tool Die, Inc. is exhibiting at Fabtech 2016 in Booth No. N7108 from November 16-18 at the Las Vegas Convention Center in Las Vegas, NV. On display will be MTD’s Model M71-E-6 Electric Tube End Forming Systems for tubes up to 1 Â-½” in diameter. This machine offers up to a 40% faster cycle rate than our comparable hydraulic machines. A servo flag stop system is standard for...

Read More »
End Forming Systems handle tubes up to 1 ½ in. in diameter.
Food Processing & Preparation

End Forming Systems handle tubes up to 1 ½ in. in diameter.

Programmable through human machine interface, Model M71-E-6 featuresÂ- servo driven, 6-position rotary shuttle, while Model M71-E-3 has pneumatically driven, 3-position shuttle. Servo flag stop system is available for tool-free flag adjustments, which helps achieve quick, accurate setups. In addition to reduced noise, electric tube end forming systems also feature independent stroke...

Read More »
Servo Roll Former handles tube ODs up to 3/4 in. .
Food Processing & Preparation

Servo Roll Former handles tube ODs up to 3/4 in. .

Featuring servo driven ball screw unit, Servo Roll Former has max jaw opening of 1.25 in. and is driven by 5 hp variable speed Hause Head. Machine operates by advancing and closing spinning head containing either rolling or cutting tools over clamped tube. Through machine's HMI, depth of rolled or cut grooves can be adjusted. Measuring 48 x 72 x 72 in., ISO 9001:2008 Certified roll forming...

Read More »
Food Processing & Preparation

Manchester Tool & Die Exhibiting at Fabtech

Manchester Tool Die, Inc. is exhibiting at Fabtech 2013 in Booth No. S4045 from November 18-21 at McCormick Place in Chicago. Fabtech is North America's largest metal forming, fabricating, welding and finishing event. On display will be one of MTD’s M71End Forming Machines which is equipped with the new servo flag stop system. The new servo positioning flag stop system is designed to aid setup...

Read More »
New M11-E-6 Tube End Forming System
Food Processing & Preparation

New M11-E-6 Tube End Forming System

The new Model M11-E-6 Tube End Forming System is now available from Manchester Tool & Die, Inc. Several cost savings are available by going green" with the Model M11-E-6, including power, setup, production and maintenance savings. The M11-E-6 Tube End Forming System offers lower sound levels, an average power savings of 83% and setup savings of 67% with numerous end forms available for...

Read More »
Hydraulic Machine combines end forming and roll forming.
Food Processing & Preparation

Hydraulic Machine combines end forming and roll forming.

Featuring 72 x 96 in. footprint, Model M10-H3-R includes programmable control system and diagnostics for machine maintenance. Tube end forms that require both end forming and roll forming processes can be completed without staging of materials between processes. Model M10-H3-R can also be designed with 6-position end form station for tube end forms that require components to be assembled onto...

Read More »
New Tube & Rod End-Finishing Machine from Manchester Tool & Die
Machinery & Machining Tools

New Tube & Rod End-Finishing Machine from Manchester Tool & Die

Manchester Tool & Die, Inc. now offers Pines Technology Model 660 Tube & Rod End-Finishing Machines for fast and simultaneous deburring, ID / OD chamfering, and facing. Model 660 includes two models, a manually operated and an air operated machine for finishing up to 1,500 ends per hour and 1,875 ends per hour, respectively. These end-finishing machines offer cost savings by freeing lathes and...

Read More »
Agricultural & Farming Products

High-Thrust Groover suits rolling or cutting operations.

With capacity of Â-¾ in. dia x .120 in. wall, 24014 High Pressure/High Thrust Groover operates by advancing and closing spinning head containing rolling or cutting tools over clamped tube. Depth of rolled or machine cut grooves can be changed, and design facilitates access to tooling as well as tool changes. In addition to 5 sec cycle time, machine features jaw opening of 1¼ in. and...

Read More »
Manchester Tool & Die Exhibiting at Fabtech
Food Processing & Preparation

Manchester Tool & Die Exhibiting at Fabtech

Manchester Tool Die, Inc. is exhibiting at Fabtech 2016 in Booth No. N7108 from November 16-18 at the Las Vegas Convention Center in Las Vegas, NV. On display will be MTD’s Model M71-E-6 Electric Tube End Forming Systems for tubes up to 1 Â-½” in diameter. This machine offers up to a 40% faster cycle rate than our comparable hydraulic machines. A servo flag stop system is standard for...

Read More »
End Forming Systems handle tubes up to 1 ½ in. in diameter.
Food Processing & Preparation

End Forming Systems handle tubes up to 1 ½ in. in diameter.

Programmable through human machine interface, Model M71-E-6 featuresÂ- servo driven, 6-position rotary shuttle, while Model M71-E-3 has pneumatically driven, 3-position shuttle. Servo flag stop system is available for tool-free flag adjustments, which helps achieve quick, accurate setups. In addition to reduced noise, electric tube end forming systems also feature independent stroke...

Read More »
Servo Roll Former handles tube ODs up to 3/4 in. .
Food Processing & Preparation

Servo Roll Former handles tube ODs up to 3/4 in. .

Featuring servo driven ball screw unit, Servo Roll Former has max jaw opening of 1.25 in. and is driven by 5 hp variable speed Hause Head. Machine operates by advancing and closing spinning head containing either rolling or cutting tools over clamped tube. Through machine's HMI, depth of rolled or cut grooves can be adjusted. Measuring 48 x 72 x 72 in., ISO 9001:2008 Certified roll forming...

Read More »
Food Processing & Preparation

Manchester Tool & Die Exhibiting at Fabtech

Manchester Tool Die, Inc. is exhibiting at Fabtech 2013 in Booth No. S4045 from November 18-21 at McCormick Place in Chicago. Fabtech is North America's largest metal forming, fabricating, welding and finishing event. On display will be one of MTD’s M71End Forming Machines which is equipped with the new servo flag stop system. The new servo positioning flag stop system is designed to aid setup...

Read More »
New M11-E-6 Tube End Forming System
Food Processing & Preparation

New M11-E-6 Tube End Forming System

The new Model M11-E-6 Tube End Forming System is now available from Manchester Tool & Die, Inc. Several cost savings are available by going green" with the Model M11-E-6, including power, setup, production and maintenance savings. The M11-E-6 Tube End Forming System offers lower sound levels, an average power savings of 83% and setup savings of 67% with numerous end forms available for...

Read More »
Hydraulic Machine combines end forming and roll forming.
Food Processing & Preparation

Hydraulic Machine combines end forming and roll forming.

Featuring 72 x 96 in. footprint, Model M10-H3-R includes programmable control system and diagnostics for machine maintenance. Tube end forms that require both end forming and roll forming processes can be completed without staging of materials between processes. Model M10-H3-R can also be designed with 6-position end form station for tube end forms that require components to be assembled onto...

Read More »
Company News

Re-Engineered Business Model for Manchester Tool & Die

Manchester Tool & Die, Inc. has re-engineered its business model, including machining processes, purchasing procedures and manufacturing and assembly operations. These changes have led to significant reductions in lead times and in cost reductions for the customer for both machines and tooling. Machine components have been upgraded, including MTD's new programmable HMI (Human Machine Interface)...

Read More »
New Tube & Rod End-Finishing Machine from Manchester Tool & Die
Machinery & Machining Tools

New Tube & Rod End-Finishing Machine from Manchester Tool & Die

Manchester Tool & Die, Inc. now offers Pines Technology Model 660 Tube & Rod End-Finishing Machines for fast and simultaneous deburring, ID / OD chamfering, and facing. Model 660 includes two models, a manually operated and an air operated machine for finishing up to 1,500 ends per hour and 1,875 ends per hour, respectively. These end-finishing machines offer cost savings by freeing lathes and...

Read More »
Company News

New Tube End Forming Literature from Manchester Tool & Die

Manchester Tool & Die, Inc. now offers new literature featuring the company's tube end forming equipment and tooling capabilities. The brochure provides details and specifications on O.D. tube capacities, typical applications and specific benefits for each model of tube end forming machine, groover, crimper, crimp machine and autoloader. Manchester Tool & Die offers standard and custom-built tube...

Read More »
Company News

Steel Fabrication Now Available from Manchester Tool & Die

September 24, 2008 Manchester Tool & Die, Inc. announces a new fabricating plant offering steel fabrication services. The plant is currently equipped with two brake presses with capacities of 3/8 x 6', 5/16" x 8' and 1/4" x 10' and a Miller 452 MIG Welder for custom and production welding. A Dynatorch Plasma Table and a large slip plate metal roll are also being added to the equipment line....

Read More »

All Topics