Company News

Henkel Corporation

One Henkel Way, P.O. Box 4016, Rocky Hill, CT, 06067, USA

  • 860-571-5100

Latest New Product News from
Henkel Corporation

Adhesives & Sealants, Chemicals & Chemical Processing

Automotive Silicone Adhesive Sealant affords process flexibility.

Jul 29, 2016

Designed for automotive module applications, BERGQUIST TLB 400 SLT offers adaptable thermal cure profile that enables full cure, independent of ambient moisture, at temperatures from 25 to 180°C to accommodate various manufacturing protocols. This 2-part solution, with 400% elongation to break, creates environmentally protected enclosure resistant to degradation from exposure to common... Read More

Materials & Material Processing

Thermal Interface Material suits high power density systems.

Jul 05, 2016

Consisting of soft and compliant gap filling material, GAP PAD HC 5.0 has thermal conductivity of 5.0 W/m-K and is designed to manage heat generated by high power density components. Product allows for optimized interfacing and wet out, even to rough surfaces and topographies. Available in thickness from 0.508–3.175 mm, GAP PAD HC 5.0 is manufactured with natural tack on both sides, contains no... Read More

Adhesives & Sealants

Interior Adhesives target passenger vehicle applications.

May 13, 2016

Consisting of one-component, waterborne laminating adhesive, AQUENCE® PL 5101™ simplifies production by eliminating need to mix components, while curing on-command through heat activation. TECHNOMELT® AS 8383™, consisting of non-reactive APAO hot melt, offers multi-functional application capabilities, with effectiveness on various substrates, including acrylonitrile butadiene styrene and... Read More

Adhesives & Sealants

Hot Melt Encapsulant offers thermal conductivity.

Apr 01, 2016

With ability to transfer heat through encapsulating layer, Thermally Conductive Technomelt® offers dual-function performance in single material solution. Product can be melted, molded, and cooled under low pressure, delivering encapsulation technique that protects delicate circuitry and PCB assemblies, while forming self-enclosed housing and enabling heat dissipation. Offering thermal... Read More

Adhesives & Sealants, Material Handling & Storage, Paints & Coatings

Removable Hot Melt Material streamlines substrate coating.

Mar 31, 2016

Formulated to allow accelerated, precise deposition in small areas, slump-resistant Technomelt® AS 8998 is compatible with automated dispensing systems and offers peel-off approach to masking specific components or designated PCB areas that must remain free of any applied protective coatings. This silicone- and halogen-free, RoHS-compliant material, which solidifies upon cooling, ensures... Read More

Chemicals & Chemical Processing

Low-Viscosity Gap Filling Material has high thermal conductivity.

Dec 14, 2015

Viscosity of GAP FILLER 1400SL allows this 2-part, silicone-based, liquid gap filling material to flow in and around tight, uniquely shaped structures to fill small voids and provide thermal transfer to 1.4 W/m-K. When cured, soft material allows absorption of CTE stresses and provides mechanical shock dampening for fragile assemblies. Product cures at room temperature without any byproducts... Read More

Materials & Material Processing

Thermal Interface Material offers EMI absorption.

Aug 21, 2015

With thermal conductivity of 1.0 W/m-K and EMI absorption for frequencies above 1 GHz, GAP PAD EMI 1.0 offers electronic specialists critical heat and electromagnetic energy control in flexible, gap filling product designed to exhibit exceptionally low stress on solder joints. Thermal conductivity is optimized by material’s natural tack on one side, which eliminates requirement for any... Read More

Adhesives & Sealants, Green & Clean

Hybrid Adhesive features structural cyanoacrylate technology.

Oct 01, 2014

Combining bond strength of structural epoxy with speed of instant adhesive, Loctite® 4090™ offers rapid, high-strength bonding to range of substrates, including metals, most plastics, and rubbers. Product offers impact, moisture, and UV resistance, as well as temperature resistance to 300°F. Available as 50 ml cartridge packaged with 5 mix nozzles, gel adhesive fixtures in 3-5 min when... Read More

Adhesives & Sealants

Polyolefin-Based Hotmelt helps reduce interior auto weight.

May 30, 2013

Applied through roll coating process, TECHNOMELT XPO 1050 can bond range of interior-related substrates without requiring pretreatment of plastic surface. In addition to ability to reduce vehicle mass by 0.8–2.2 kg per vehicle, use of this product can eliminate need for heat ovens and tunnels and pretreatment flame equipment or additional surface primers. Interior applications include door... Read More

Adhesives & Sealants

Reactive Hotmelt Adhesive is intended for headlamp bonding.

Nov 09, 2012

Exhibiting properties that minimize bond failure and promote durable assemblies, PURmelt® QR 4511™ comes in gray or black, with respective flash points of 329°F and less than 325°F, and can bond range of substrates to meet various automotive specifications. This 100% solids adhesive has density of 8.8 lb/gal, viscosity of 22,000 cps at 250°F, and shelf life of 6 months at 77°F. Bond... Read More

Adhesives & Sealants

High-Tg Underfill balances reliability and reworkability.

Mar 16, 2012

Suited for handheld communication and entertainment applications, LOCTITE UF3810 delivers drop and shock protection and thermal cycling reliability for fine-pitch (0.5 mm and below) area array devices. Material is halogen-free, completely reworkable, and has glass transition (Tg) temperature of 100°C, delivering thermal cycling reliability for next-generation wafer-level CSP (WLCSP) and PoP... Read More

Adhesives & Sealants, Materials & Material Processing

Conductive Die Attach Films suit leadframe applications.

Apr 01, 2011

Ablestik C100 series conductive die attach films include Ablestik C130 formulation with 30 micron thickness and Ablestik C115 with 15 micron thickness. Suitable for use with die sizes ranging from 1 x 1 mm up to 6 x 6 mm for package types including QFNs and QFPs, films provide optimal wetting ability with lower bonding temperature for stable adhesion strength. This enables adhesion against... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Structural Acrylic Adhesives can replace welds and rivets.

Mar 08, 2011

Designed for structural assembly of metals, especially aluminum, Loctite® H8100 and H8110 Speedbonder(TM) Adhesives are green-colored, 2-component acrylic formulas that cure at room temperature. Loctite H8100 fixtures in 20 min, while Loctite H8110 fixtures in just 5 min. Both feature glass spacer beads that maximize toughness and prevent adhesive from squeezing out of joint during clamping.... Read More

Adhesives & Sealants, Materials & Material Processing

Anaerobic Threadlocker cures through contaminants.

Mar 01, 2011

Suited for metal fasteners from ¼-¾ in. in diameter, Loctite® 243(TM) withstands temperatures up to 360°F, cures without primers, and tolerates contamination from thread lubrication, anti-corrosion, and protection fluids. Removable-strength, medium-viscosity, thixotropic liquid will not migrate once applied to fastener's surface. Product fixtures in 5 min and achieves full cure in 24 hr.... Read More

Adhesives & Sealants

Light Curing Adhesives target medical device assembly.

Nov 16, 2010

Loctite® 4310(TM) Flashcure® Light Cure Instant Adhesive is low-viscosity formulation that fills gaps to 0.005 in. using moisture cure and up to 0.5 in. with exposure to light. High-viscosity Loctite® 4311(TM) Flashcure® Light Cure Instant Adhesive fills gaps to 0.008 in. with moisture cure, and with light, fills up to 0.5 in. gaps. Able to withstand temperatures from -65° to +180°F, both... Read More

Adhesives & Sealants

Two-Component, Instant Adhesive fills gaps up to 5 mm wide.

Jun 01, 2010

Loctite 3090 is able to bond metal, plastic, rubber, and ceramic materials as well as porous substrates such as wood, paper, and cork. Two-chamber syringe packaging enables precise and clean application, and transparent gel formulation facilitates application to vertical surfaces without dripping. Working time is rated at 90-180 sec after application, and integrated static mixer ensures curing is... Read More

Materials & Material Processing

Lead-free Solder Paste creates joints with smooth, shiny finish.

Dec 18, 2009

Multicore LF730 enables high-speed printing for extremely fine parts; apertures as small as 160 microns in diameter and stencils as thin as 80 microns have been successfully printed. Particle size distribution delivers more solder per aperture but with less risk of aperture clogging compared to traditional Type 4 pastes. Thermally stable product has shown consistent performance in environments as... Read More

Electrical Equipment & Systems, Materials & Material Processing

UV Cure System suits benchtop production.

Nov 30, 2009

Loctite® Focused 400 W UV Flood Lamp cures adhesives used for bonding, potting, tacking, and sealing and emits light in UVA and UVB regions. Designed to cure 4 in. square area, unit weights about 4 lb and measures 7.5 x 4.5 x 5.8 in. Metal halide lamp also includes energy-saving standby position switch that reduces its output power by half when it is not being used. System can be used as... Read More

Adhesives & Sealants

Semisolid Pipe Sealant Stick does not spill or leak.

Nov 20, 2009

Loctite QuickStix 5671(TM) PST® seals tapered pipe thread fittings made of stainless steel, aluminum, galvanized metal, and other inert metals. Single component sealant eliminates leak paths and ensures complete contact between threads to fully seal assembly. Designed to prevent corrosion and galling in threads, this off-white anaerobic paste will not shrink or crack, ensuring long-term... Read More

Material Handling & Storage

Anaerobic Adhesive Dispenser eliminates wasted material.

Oct 29, 2009

Used to dispense anaerobic flange and gasket sealants from 50 ml tubes, Loctite® 50 ml Tube Squeeze Dispenser provides smooth and consistent adhesive flow. Ergonomic, trigger-controlled dispense gun eliminates tube squeezing and provides controlled positioning of adhesives. Manually operated dispenser incorporates pivoting tray that facilitates tube changeover. Design completely empties tube,... Read More

Other Company News from
Henkel Corporation

May 12, 2014

Sep 26, 2011

May 31, 2011

Mar 08, 2011

Dec 01, 2009

x x

Aug 28, 2009

Aug 06, 2007

Oct 05, 2006

Jun 21, 2006

Nov 28, 2005