The Lincoln Electric Company
Cleveland, OH 44117
Welding Helmets provide protection and style.
Auto-darkening UltrashadeÃ-® helmets eliminate need to lower or lift helmet at start or stop of weld. As welding arc is detected, helmets darken to appropriate level of shade protection within a fraction of milliseconds. Available with patriotic and motor-sports graphics, they protect users from UV light, spatter, and fumes. Features include solar power, Swiss optics, and fully adjustable...
Read More »Power Supply provides portable auxiliary power.
Ranger(TM) 3 Phase delivers up to 11,500 W peak, 10,500 W continuous 3-phase power for farm irrigation circles and pumps. It can also provide 10,500 W peak, 9,500 W continuous single phase power for back-up generators, plasma cutters, and inverter welders. At 100% duty cycle, power source is rated 225 A for AC, 210 A for DC, and 200 A for CV. Unit is powered by 20 hp, 2-cylinder, 4-cycle,...
Read More »Welding System has 30-250 A output range.
Suited for sheet metal fabrication, Power MIG(TM) 215 features 215 A @ 30% duty cycle and industrial drive system with tachometer regulated drive. Diamond Core(TM) Technology creates arc that delivers smooth starts and low spatter, while separate drive gear reduces pressure on drive motor shaft. Features include brass-to-brass connection from gun to wire drive system, 7 voltage tap ranges, 115...
Read More »Wire Feeder is digital and portable.
Power Feed(TM) 15M delivers multi-process performance in package that meets IP23 environmental rating. It works with Power WaveÃ-® power sources, which feature Nextweld(TM) Waveform Control TechnologyÃ-® and digital communications. Systems are pre-loaded with 60+ welding programs, selectable at wire feeder. Heavy-duty, cast aluminum wire drive system has 2 gear-driven rolls and split wire...
Read More »
Welder/Power Generator provides 10,000 W peak power.
Ranger(TM) 10,000 allows operators to simultaneously weld and use AC generator power. At 100% duty cycle, machine is rated 225 A for AC Stick welding, 210 A for DC Stick welding, and 200 A for CV wire welding. Full KVA 120/240 V outlet allows operators to run high-capacity motors, while four 120 V outlets provide auxiliary power. Unit is available with KohlerÃ-® or HondaÃ-® 2-cylinder,...
Read More »Welding Electrodes suit pipe welding environment.
Pipeliner(TM) Welding Consumables are available for stick, MIG, flux-cored, and submerged arc welding. All are lot-controlled and lot-tested with certified test results. Electrodes are packaged in moisture-resistant containers for consistent performance regardless of welding environment.
Read More »
Wire Feeder suits automated applications.
Digitally-controlled Power Feed(TM) 10R, part of modular, multi-process welding system, mounts to robot arm or can be used for hard automation. Four drive roll wire feeder operates on 40 Vdc input power, and features split wire guide that aligns and supports wire through feeding system. Brass-to-brass connections allow optimum connectivity between feeder and gun. Unit is capable of MIG, pulsed...
Read More »
Power Source powers stick and TIG welding.
Suited for construction site/outdoor use, Invertec V275-S is rated at up to 275 A to enable users to weld with up to 7/32 in. stick electrodes. Product employs weather-resistant features and meets IP23S environmental rating. Able to operate on input voltages from 208-575 Vac, single- or 3-phase power, unit does not require derating with single-phase input power. It offers Selectable Hot Start,...
Read More »
Welding Electrode suits out-of-position applications.
Innershield NR-233 self-shielded flux-cored wire electrode (AWS E71T-8) incorporates proprietary microflux(TM) technology and is available in 1/16 in. electrode diameter wound on 12.5 and 25 lb spools. Designed for high deposition rate welding, product offers minimized gas marking. Applications include seismic or general structural steel erection and ship and barge fabrication.
Read More »
Compact Welding System is available in Ready-Pak(TM) version.
Rated at 350 A, multi-process Power Wave(TM) 355 provides Waveform Control Technology(TM), which controls and shapes output waveform to produce optimal arc characteristics for MIG, Pulsed MIG, and flux-cored welding applications. Package supplies all components for operation, including Power Wave 355 inverter power source; Power Feed(TM) 10 wire feeder, with one-piece, split wire-guide system;...
Read More »