The Lincoln Electric Company
Cleveland, OH 44117
Welding Fume Extractor creates cleaner environment.
Designed for intermittent and continuous removal of welding dust, smoke, and fumes, Mobiflex(TM) securely filters contaminated air and re-circulates it into work area. Rear wheels and front casters promote portability, while 10 or 13 ft long extraction arms lend to application flexibility. Mobiflex(TM) 200-M captures welding fumes inside LongLifeÃ-® filter, which is changed out by hand....
Read More »Flux-Cored Wires deliver arc stability.
Gas-shielded, flux-cored AWS E71T-12 wires, UltraCore 712C and UltraCore 712A80, are used for mild steel welding. Suitable for tank and shipbuilding applications, UltraCore AWS E71T-12 wires exhibit high impact values regardless of notch location in weld joint. T-12 wires are tri-classified meeting AWS T-9 and T-1 requirements and suited to deliver impacts for low temperature or fracture critical...
Read More »Welder/Generator suits construction, pipe, and fleet work.
Powered by 4-cylinder, water-cooled, 1,800 rpm PerkinsÃ-® diesel engine, VantageÃ-® 400 provides 400 A of dc welding output, 19,000 W peak 3-phase ac generator power, and 12,000 W peak 1-phase ac auxiliary power. Housed in corrosion-resistant stainless steel case, unit includes Lincoln Chopper Technology(TM) for smooth arc, and Voltage Regulation Device(TM), which allows operator to...
Read More »Welding Guns feature insulated gooseneck design.
MagnumÃ-® semiautomatic welding guns are configured for use with .035-.045 in. or .052 to 1/16 in. MIG or OutershieldÃ-® gas-shielded flux-cored operations. Rated at 400 A at 40% duty cycle with CO2 shielding gas, guns are pre-assembled with contact tips, gas diffusers, insulated gas nozzles, and cable liners. Other features include handle grip with non-slip grooves and 15 ft gun cable...
Read More »Welding Power Source can be used in multiple applications.
Multi-process, inverter-based InvertecÃ-® V450-PRO is suited for shops welding with 1/16 in. or larger diameter welding wire electrodes that also require power for arc gouging repair with 3/8 in. carbon. Capable of stick, Touch-Start(TM) TIG, MIG, cored wire welding, and arc gouging, product features controls that include selectable Hot Start(TM) and variable Arc Force functions. Unit...
Read More »
Generator/Welder uses 3/32 and 1/8 in. diameter electrodes.
Power Arc(TM) 5500 provides 5,500 W of surge ac generator power and 125 A of ac welding amperage. Welding capacity is delivered by Robin/SubaruÃ-® overhead cam engine, or HondaÃ-® overhead valve engine, both rated at 9 hp. Single-range output control lets user dial in correct weld settings, while built-in circuit breakers protect tools and unit from power overload. Enclosed in tube-frame...
Read More »Submerged Arc Flux suits offshore welding applications.
Suited for submerged arc welding, LincolnweldÃ-® 888 highly basic flux is classified to AWS H4 requirements for diffusible hydrogen levels under 4 mL/100 g of weld metal. It exhibits weld metal toughness and features packaging properties that positively impact moisture resistance. Product is suited for pressure vessel, shipbuilding, and structural fabrication as well as narrow gap...
Read More »Wire Feeder uses MaxTrac(TM) heavy-duty wire drive system.
Suited for MIG and metal- or flux-cored wire welding, LF-74 delivers positive arc starting and feeding with stainless steel and aluminum. Its 4-roll MaxTrac(TM) cast aluminum wire drive system delivers consistent feeding force. Accommodating 0.023-1/16 in. MIG wire diameters and .030-5/64 in. flux-cored wire diameters, unit offers feed speeds of 50-800 ipm. Split wire guides provide full support...
Read More »Software enables remote weld data review.
Production Monitoring(TM) Software helps ensure welding systems are functioning and identifies problems as they occur. Welding machine faults can be logged and emailed, while diagnostic troubleshooting can be performed from remote location. Software provides functionality to collect and store long and short term weld history, monitor production tasks, set weld limits and tolerances, and track...
Read More »Welding System is available in various configurations.
Ready-Pak(TM) kits are available in 4 configurations with various power sources to meet application needs. All kits include LF-72 wire feeder featuring 2-roll MaxTrac(TM) drive system for accurate wire feeding. Other components are power source, drive rolls and wire guide, wire feeder control cable, welding gun, work lead and clamp, and HarrisÃ-® Flowmeter/Regulator and gas hose. Two kits...
Read More »