Pulse Electronics
Suite #100
San Diego, CA 92128
Share:
Pulse Electronics Presents PM220X Series SMT Inductors That Meet IATF 16949 Manufacturing Standards
The PM220X Series SMT Inductors are designed for industrial and automotive applications. The devices can handle high transient current spikes without saturation and can be operated at temperature up to 155°C. They come with high current flat wires, composite material and large terminations for low DCR.
Read More »Pulse Electronics Presents PM220X Series SMT Inductors That Meet IATF 16949 Manufacturing Standards
The PM220X Series SMT Inductors are designed for industrial and automotive applications. The devices can handle high transient current spikes without saturation and can be operated at temperature up to 155°C. They come with high current flat wires, composite material and large terminations for low DCR.
Read More »New PA4470.XXXNL Wire Wound Transformers are Designed for Discontinuous Mode Flyback Circuits
The Pulse Electronics' PA4470.XXXNL High Frequency Wire Wound Transformers are offered in ER7.5 8-Pin SMD platform with power range up to 1.8 W. The units are suitable for datacom and industrial industries such as sensor interfaces, isolated telecom converters, Power over Ethernet, motor control and industrial control applications. They come with an isolation voltage of 1650 Vdc and used in low...
Read More »New PA4470.XXXNL Wire Wound Transformers are Designed for Discontinuous Mode Flyback Circuits
The Pulse Electronics' PA4470.XXXNL High Frequency Wire Wound Transformers are offered in ER7.5 8-Pin SMD platform with power range up to 1.8 W. The units are suitable for datacom and industrial industries such as sensor interfaces, isolated telecom converters, Power over Ethernet, motor control and industrial control applications. They come with an isolation voltage of 1650 Vdc and used in low...
Read More »New PA4339.XXXNLT Series Common Mode Chokes are Suitable for Switch Mode Power Supplies
PA4339.XXXNLT Series Common Mode Chokes are offered in 3.8 mm max package with current/impedance ranging from 140 ohms/9A to 1300 ohms/2.5A. The devices are used for suppressing conducted common mode EMI noise. They are suitable for low-voltage (
Read More »New PA4339.XXXNLT Series Common Mode Chokes are Suitable for Switch Mode Power Supplies
PA4339.XXXNLT Series Common Mode Chokes are offered in 3.8 mm max package with current/impedance ranging from 140 ohms/9A to 1300 ohms/2.5A. The devices are used for suppressing conducted common mode EMI noise. They are suitable for low-voltage (
Read More »New PA500X Series SMT Inductors are Designed for Applications Requiring Current up to 40Apk
The PA500X Series SMT Inductors are offered in PA5001, PA5002, PA5003, PA5004, PA5005, PA5006, and PA5007 models. The PA500X series inductors are available in five platform sizes in ranging from 4 x 4 to 8 x 8 mm with profile height down to 2.1 mm. The units feature shielded construction and are suitable for datacom, computing and industrial applications.
Read More »New PA500X Series SMT Inductors are Designed for Applications Requiring Current up to 40Apk
The PA500X Series SMT Inductors are offered in PA5001, PA5002, PA5003, PA5004, PA5005, PA5006, and PA5007 models. The PA500X series inductors are available in five platform sizes in ranging from 4 x 4 to 8 x 8 mm with profile height down to 2.1 mm. The units feature shielded construction and are suitable for datacom, computing and industrial applications.
Read More »NBase-T RJ45 Connectors come with EMI spring fingers.
Available in single port, 4-port, 8-port, 12-port and 16-port configurations, NBase-T RJ45 connectors are suitable for 2.5GBase-T and 5GBase-T applications. Used for boosting speed from 1 to 5 Gigabits for distances up to 100 m on Cat5e and Cat6 networks, connectors use through-hole technology and withstand lead-free solder reflow temperatures up to 260°C. Units meet RoHS and UL standards.
Read More »NBase-T RJ45 Connectors come with EMI spring fingers.
Available in single port, 4-port, 8-port, 12-port and 16-port configurations, NBase-T RJ45 connectors are suitable for 2.5GBase-T and 5GBase-T applications. Used for boosting speed from 1 to 5 Gigabits for distances up to 100 m on Cat5e and Cat6 networks, connectors use through-hole technology and withstand lead-free solder reflow temperatures up to 260°C. Units meet RoHS and UL standards.
Read More »Pulse Electronics Presents PM220X Series SMT Inductors That Meet IATF 16949 Manufacturing Standards
The PM220X Series SMT Inductors are designed for industrial and automotive applications. The devices can handle high transient current spikes without saturation and can be operated at temperature up to 155°C. They come with high current flat wires, composite material and large terminations for low DCR.
Read More »Pulse Electronics Presents PM220X Series SMT Inductors That Meet IATF 16949 Manufacturing Standards
The PM220X Series SMT Inductors are designed for industrial and automotive applications. The devices can handle high transient current spikes without saturation and can be operated at temperature up to 155°C. They come with high current flat wires, composite material and large terminations for low DCR.
Read More »New PA4470.XXXNL Wire Wound Transformers are Designed for Discontinuous Mode Flyback Circuits
The Pulse Electronics' PA4470.XXXNL High Frequency Wire Wound Transformers are offered in ER7.5 8-Pin SMD platform with power range up to 1.8 W. The units are suitable for datacom and industrial industries such as sensor interfaces, isolated telecom converters, Power over Ethernet, motor control and industrial control applications. They come with an isolation voltage of 1650 Vdc and used in low...
Read More »New PA4470.XXXNL Wire Wound Transformers are Designed for Discontinuous Mode Flyback Circuits
The Pulse Electronics' PA4470.XXXNL High Frequency Wire Wound Transformers are offered in ER7.5 8-Pin SMD platform with power range up to 1.8 W. The units are suitable for datacom and industrial industries such as sensor interfaces, isolated telecom converters, Power over Ethernet, motor control and industrial control applications. They come with an isolation voltage of 1650 Vdc and used in low...
Read More »New PA4339.XXXNLT Series Common Mode Chokes are Suitable for Switch Mode Power Supplies
PA4339.XXXNLT Series Common Mode Chokes are offered in 3.8 mm max package with current/impedance ranging from 140 ohms/9A to 1300 ohms/2.5A. The devices are used for suppressing conducted common mode EMI noise. They are suitable for low-voltage (
Read More »New PA4339.XXXNLT Series Common Mode Chokes are Suitable for Switch Mode Power Supplies
PA4339.XXXNLT Series Common Mode Chokes are offered in 3.8 mm max package with current/impedance ranging from 140 ohms/9A to 1300 ohms/2.5A. The devices are used for suppressing conducted common mode EMI noise. They are suitable for low-voltage (
Read More »New PA500X Series SMT Inductors are Designed for Applications Requiring Current up to 40Apk
The PA500X Series SMT Inductors are offered in PA5001, PA5002, PA5003, PA5004, PA5005, PA5006, and PA5007 models. The PA500X series inductors are available in five platform sizes in ranging from 4 x 4 to 8 x 8 mm with profile height down to 2.1 mm. The units feature shielded construction and are suitable for datacom, computing and industrial applications.
Read More »New PA500X Series SMT Inductors are Designed for Applications Requiring Current up to 40Apk
The PA500X Series SMT Inductors are offered in PA5001, PA5002, PA5003, PA5004, PA5005, PA5006, and PA5007 models. The PA500X series inductors are available in five platform sizes in ranging from 4 x 4 to 8 x 8 mm with profile height down to 2.1 mm. The units feature shielded construction and are suitable for datacom, computing and industrial applications.
Read More »NBase-T RJ45 Connectors come with EMI spring fingers.
Available in single port, 4-port, 8-port, 12-port and 16-port configurations, NBase-T RJ45 connectors are suitable for 2.5GBase-T and 5GBase-T applications. Used for boosting speed from 1 to 5 Gigabits for distances up to 100 m on Cat5e and Cat6 networks, connectors use through-hole technology and withstand lead-free solder reflow temperatures up to 260°C. Units meet RoHS and UL standards.
Read More »NBase-T RJ45 Connectors come with EMI spring fingers.
Available in single port, 4-port, 8-port, 12-port and 16-port configurations, NBase-T RJ45 connectors are suitable for 2.5GBase-T and 5GBase-T applications. Used for boosting speed from 1 to 5 Gigabits for distances up to 100 m on Cat5e and Cat6 networks, connectors use through-hole technology and withstand lead-free solder reflow temperatures up to 260°C. Units meet RoHS and UL standards.
Read More »