Kin-Tek Laboratories Inc.

Gas Standards Generator features computer control.
Agricultural & Farming Products

Gas Standards Generator features computer control.

Featuring modular construction and expandability, 491Flex™ Calibration Gas Standards Generator uses permeation (or diffusion) tubes as component compound source for creating very low concentration mixtures. UnitÂ- replaces analog controls of 491M manual model with same controls developed for computer controlled FlexStream™ system. In addition, 491Flex utilizes electronic mass flow...

Read More »
Refillable Permeation Tubes accommodate light hydrocarbons.
Fluid & Gas Flow Equipment

Refillable Permeation Tubes accommodate light hydrocarbons.

Used in FlexStream™ calibration gas generatorÂ- to produce ppm and ppb mixtures directly from pure gases, Trace Source™ 57 Series only use gas phase of compound. Controlling pressure in tube allows high-vapor pressure compounds – methane, ethane, ethylene – to be dispensed by permeation. Emission rate is proportional to compound pressure in tube, and attainable...

Read More »
Permeation System suits trace gas calibration applications.
Test & Measurement

Permeation System suits trace gas calibration applications.

Offering manually operated standalone solutionÂ- for simple calibration applications, EcoFlex™ can use any Trace Source™ liquid source permeation or diffusion tube to give concentrations from low ppb to over 100 ppm. Up to 8 disposable tubes can be used simultaneously, or system can support one LFH refillable, high-rate tube. With calibration mixtures delivered at up to 40 psig,...

Read More »
Permeation Standards support trace light hydrocarbons.
Agricultural & Farming Products

Permeation Standards support trace light hydrocarbons.

Using FlexStream™ + Flex GF™ gas standards generator and Series 57 Gas Permeation Tubes, trace concentration mixtures of C1-C3 hydrocarbons can be prepared. Dynamically mixed concentrations from less than 10 ppb to over 1,000 ppm are available with single dilution for pure compounds. Series 57 tubes use controlled pressure of analyte vapor as permeate source to control extremely low flows of...

Read More »
Agricultural & Farming Products

Gas Standards Generator creates precision mixtures.

Diluting emission from permeation or diffusion tubes with inert gas, FlexStream™ Modular Gas Standards Generator creates trace concentration gas mixtures. Internal microprocessor is used to set operating mode and adjust dilution flows to achieve desired concentrations. System can have 1–6 modular channels and supports mixtures containing up to 48 components. Modules include Standard...

Read More »
HVAC

Humidification Module adds humidity to trace gas mixtures.

FlexStream™ can typically add adjustable humidity levelsÂ- from 20%–90% RH to trace gas mixtures produced by FlexStream™ system, but not all levels can be achieved at all flows. Trace Source™ permeation tubes are used to create trace concentration gas mixtures, and humidity is added by splitting dilution flow into 2 parts. Internal computer sets both dilution flow needed to...

Read More »
Two-Stage Dilution System generates PPB and PPT gas standards.
Fluid & Gas Flow Equipment

Two-Stage Dilution System generates PPB and PPT gas standards.

Using Trace Source™ Permeation Tubes, Span Pac™ I – SD dilution system adds precisely known flow of span vapor into controlled, adjustable flow of clean matrix gas to create PPM calibration standard. Second dilution stage further dilutes mixture with matrix gas to lower concentration. Output concentration can be varied over range of up to 10,000:1 from single tube. System can also be used...

Read More »
Calibration Gas Generator supports automated humidity control.
Agricultural & Farming Products

Calibration Gas Generator supports automated humidity control.

FlexStream™ Modular Gas Standards Generating System is available with Automated Humidity Control option,Â- which allows simulation of real sample streams. System dilutes emission from permeation or diffusion tubes with inert gas to create trace concentration gas mixtures. As end module, FlexStream™ HG saturates portion of inert dilution gas with water and mixes it with dry, trace...

Read More »
Calibration Standards for Acetaldehyde in Carbon Dioxide
Agricultural & Farming Products

Calibration Standards for Acetaldehyde in Carbon Dioxide

Trace concentration calibration standards of acetaldehyde in carbon dioxide are dynamically blended using the FlexStream™ Automated Gas Standards Generator and TraceSource™ Permeation Tubes. Acetaldehyde emitted by the permeation tube is added directly to a controlled flow of purified or beverage grade carbon dioxide to form the mixture.Â-  Mixture concentration is adjusted by varying to...

Read More »
Gas Standards Generator features computer control.
Agricultural & Farming Products

Gas Standards Generator features computer control.

Featuring modular construction and expandability, 491Flex™ Calibration Gas Standards Generator uses permeation (or diffusion) tubes as component compound source for creating very low concentration mixtures. UnitÂ- replaces analog controls of 491M manual model with same controls developed for computer controlled FlexStream™ system. In addition, 491Flex utilizes electronic mass flow...

Read More »
Refillable Permeation Tubes accommodate light hydrocarbons.
Fluid & Gas Flow Equipment

Refillable Permeation Tubes accommodate light hydrocarbons.

Used in FlexStream™ calibration gas generatorÂ- to produce ppm and ppb mixtures directly from pure gases, Trace Source™ 57 Series only use gas phase of compound. Controlling pressure in tube allows high-vapor pressure compounds – methane, ethane, ethylene – to be dispensed by permeation. Emission rate is proportional to compound pressure in tube, and attainable...

Read More »
Permeation System suits trace gas calibration applications.
Test & Measurement

Permeation System suits trace gas calibration applications.

Offering manually operated standalone solutionÂ- for simple calibration applications, EcoFlex™ can use any Trace Source™ liquid source permeation or diffusion tube to give concentrations from low ppb to over 100 ppm. Up to 8 disposable tubes can be used simultaneously, or system can support one LFH refillable, high-rate tube. With calibration mixtures delivered at up to 40 psig,...

Read More »
Permeation Standards support trace light hydrocarbons.
Agricultural & Farming Products

Permeation Standards support trace light hydrocarbons.

Using FlexStream™ + Flex GF™ gas standards generator and Series 57 Gas Permeation Tubes, trace concentration mixtures of C1-C3 hydrocarbons can be prepared. Dynamically mixed concentrations from less than 10 ppb to over 1,000 ppm are available with single dilution for pure compounds. Series 57 tubes use controlled pressure of analyte vapor as permeate source to control extremely low flows of...

Read More »
Agricultural & Farming Products

Gas Standards Generator creates precision mixtures.

Diluting emission from permeation or diffusion tubes with inert gas, FlexStream™ Modular Gas Standards Generator creates trace concentration gas mixtures. Internal microprocessor is used to set operating mode and adjust dilution flows to achieve desired concentrations. System can have 1–6 modular channels and supports mixtures containing up to 48 components. Modules include Standard...

Read More »
HVAC

Humidification Module adds humidity to trace gas mixtures.

FlexStream™ can typically add adjustable humidity levelsÂ- from 20%–90% RH to trace gas mixtures produced by FlexStream™ system, but not all levels can be achieved at all flows. Trace Source™ permeation tubes are used to create trace concentration gas mixtures, and humidity is added by splitting dilution flow into 2 parts. Internal computer sets both dilution flow needed to...

Read More »
Two-Stage Dilution System generates PPB and PPT gas standards.
Fluid & Gas Flow Equipment

Two-Stage Dilution System generates PPB and PPT gas standards.

Using Trace Source™ Permeation Tubes, Span Pac™ I – SD dilution system adds precisely known flow of span vapor into controlled, adjustable flow of clean matrix gas to create PPM calibration standard. Second dilution stage further dilutes mixture with matrix gas to lower concentration. Output concentration can be varied over range of up to 10,000:1 from single tube. System can also be used...

Read More »
Calibration Gas Generator supports automated humidity control.
Agricultural & Farming Products

Calibration Gas Generator supports automated humidity control.

FlexStream™ Modular Gas Standards Generating System is available with Automated Humidity Control option,Â- which allows simulation of real sample streams. System dilutes emission from permeation or diffusion tubes with inert gas to create trace concentration gas mixtures. As end module, FlexStream™ HG saturates portion of inert dilution gas with water and mixes it with dry, trace...

Read More »
Calibration Standards for Acetaldehyde in Carbon Dioxide
Agricultural & Farming Products

Calibration Standards for Acetaldehyde in Carbon Dioxide

Trace concentration calibration standards of acetaldehyde in carbon dioxide are dynamically blended using the FlexStream™ Automated Gas Standards Generator and TraceSource™ Permeation Tubes. Acetaldehyde emitted by the permeation tube is added directly to a controlled flow of purified or beverage grade carbon dioxide to form the mixture.Â-  Mixture concentration is adjusted by varying to...

Read More »

All Topics