Intelligent Actuator, Inc.

Torrance, CA 90505

Rotating Joint WU Wrist Unit comes with battery-less absolute encoder.
Rotating Joint WU Wrist Unit is available in T-axis and the B-axis which can rotate ±360 degrees and ±100 respectively. Product is offered in small S type and medium M type which weighs 1.6 kg and 2.8 kg each. S type and M offers maximum payload of 1.0 kg and 2.0 kg respectively. Device is suitable for single-axis and Cartesian robot applications.
Read More »
RCP6-GRT7 Thin Gripper Series feature integrated body frame guide.
RCP6-GRT7 Thin Gripper Series come with battery-less absolute encoder. Unit can be used with orthogonal axis and gripper pick and place. Product offers overhang amount of 150 mm and grip force up to 300N. Gripper provides mounting freedom by selecting option from 1 to 4 surfaces to mount and select from 4 wiring exit directions.
Read More »
EC Series Elecylinder feature built-in controller.
Featuring battery-less absolute encoder and predictive maintenance function, EC Series Elecylinder can be operated using ON/OFF signals. Offering longer service life, unit adjusts acceleration and deceleration quickly. Product’s troubleshooting can be done using teaching pendant.
Read More »
Tabletop Robots support cell production applications.
Employing rigid base, ball screw, and servo control motor, TTA Series provides max speeds of 800, 800, and 400 mm/sec in X, Y, and Z axes, respectively. Large memory stores programs and positions, while additional data recovery function makes sure original data can be restored should writing to FLASH drive fail due to power failure. Offering 16 points/16 points I/O, expandable up to 48 points/48...
Read More »
RCP3/RCA2 Table Type Actuators
IAI's New RCP3/RCA2 Series Electric Actuators. The motor unit can be switched out simply by removing a single screw. This makes for easy maintenance if the motor should need to be replaced. Features: o Table Top Version Offers Increased Moment and Built-In Guide o Energy Efficient: Running Cost 1/10 that of an air cylinder o Low Cost: Improving our Technologies Mean Lower Cost to You o Space...
Read More »
Electric Actuators offer single and double guides.
Featuring short body design for narrow locations, RCP2/RCA-SRA Series is available with pulse type motor for push force and low-speed raising and lowering operations, as well as servo motor for stable transportation during high-speed operations. Guides can be selected if load is applied to end of rod, or if straight motion is required. Providing 5 installation surfaces, actuators are available...
Read More »
Teaching Pendant features interactive touch panel.
Facilitating configuration for first time users, CON-PT features 3-color LED display that shows all position information on one screen and has backlight that changes color to alert user of error. Functions include position data entry/editing, move function, input/output signal monitoring and testing, parameter editing, and password protection.
Read More »
Linear Servo Slider Actuator installs in narrow spaces.
Measuring 20 mm wide, ROBO Cylinder Micro Slider RCL-SA operates at max acceleration of 2 G and max speed of 600 mm/s. Sine-wave drive with 3-phase coil eliminates cogging, while built-in encoder enables actuator to perform positioning to maximum of 512 points when combined with ACON controller. Linear motor method, which has no rotational speed reduction mechanism, minimizes slider size while...
Read More »
Linear Actuators facilitate conversion from air cylinders.
Equipped with 200 V servo motor, ROBO Cylinder RCS2 Series comes in Rod or Slider types and utilizes SCON position controller as well as SSEL and XSEL program controllers. Units convert revolutions of electrical motor to linear motion force. AQ seals supply lubricating oil during operation to ensure maintenance-free period up to 2,700 miles, while servo standby modes and automatic servo off modes...
Read More »
Linear Actuators offer alternative to air cylinders.
Available in Slider or Standard Rod versions, ROBO Cylinder ERC2 Series includes built-in position controller that allows user to select from up to 3 operation patterns and 4 positioning methods. Actuators convert revolutions of electrical motor to linear motion force. AQ seals supply lubricating oil during operation to ensure maintenance-free period of up to 3,100 miles, while servo standby...
Read More »
Rotating Joint WU Wrist Unit comes with battery-less absolute encoder.
Rotating Joint WU Wrist Unit is available in T-axis and the B-axis which can rotate ±360 degrees and ±100 respectively. Product is offered in small S type and medium M type which weighs 1.6 kg and 2.8 kg each. S type and M offers maximum payload of 1.0 kg and 2.0 kg respectively. Device is suitable for single-axis and Cartesian robot applications.
Read More »
RCP6-GRT7 Thin Gripper Series feature integrated body frame guide.
RCP6-GRT7 Thin Gripper Series come with battery-less absolute encoder. Unit can be used with orthogonal axis and gripper pick and place. Product offers overhang amount of 150 mm and grip force up to 300N. Gripper provides mounting freedom by selecting option from 1 to 4 surfaces to mount and select from 4 wiring exit directions.
Read More »
EC Series Elecylinder feature built-in controller.
Featuring battery-less absolute encoder and predictive maintenance function, EC Series Elecylinder can be operated using ON/OFF signals. Offering longer service life, unit adjusts acceleration and deceleration quickly. Product’s troubleshooting can be done using teaching pendant.
Read More »
Tabletop Robots support cell production applications.
Employing rigid base, ball screw, and servo control motor, TTA Series provides max speeds of 800, 800, and 400 mm/sec in X, Y, and Z axes, respectively. Large memory stores programs and positions, while additional data recovery function makes sure original data can be restored should writing to FLASH drive fail due to power failure. Offering 16 points/16 points I/O, expandable up to 48 points/48...
Read More »
RCP3/RCA2 Table Type Actuators
IAI's New RCP3/RCA2 Series Electric Actuators. The motor unit can be switched out simply by removing a single screw. This makes for easy maintenance if the motor should need to be replaced. Features: o Table Top Version Offers Increased Moment and Built-In Guide o Energy Efficient: Running Cost 1/10 that of an air cylinder o Low Cost: Improving our Technologies Mean Lower Cost to You o Space...
Read More »
Electric Actuators offer single and double guides.
Featuring short body design for narrow locations, RCP2/RCA-SRA Series is available with pulse type motor for push force and low-speed raising and lowering operations, as well as servo motor for stable transportation during high-speed operations. Guides can be selected if load is applied to end of rod, or if straight motion is required. Providing 5 installation surfaces, actuators are available...
Read More »
Teaching Pendant features interactive touch panel.
Facilitating configuration for first time users, CON-PT features 3-color LED display that shows all position information on one screen and has backlight that changes color to alert user of error. Functions include position data entry/editing, move function, input/output signal monitoring and testing, parameter editing, and password protection.
Read More »
Linear Servo Slider Actuator installs in narrow spaces.
Measuring 20 mm wide, ROBO Cylinder Micro Slider RCL-SA operates at max acceleration of 2 G and max speed of 600 mm/s. Sine-wave drive with 3-phase coil eliminates cogging, while built-in encoder enables actuator to perform positioning to maximum of 512 points when combined with ACON controller. Linear motor method, which has no rotational speed reduction mechanism, minimizes slider size while...
Read More »
Linear Actuators facilitate conversion from air cylinders.
Equipped with 200 V servo motor, ROBO Cylinder RCS2 Series comes in Rod or Slider types and utilizes SCON position controller as well as SSEL and XSEL program controllers. Units convert revolutions of electrical motor to linear motion force. AQ seals supply lubricating oil during operation to ensure maintenance-free period up to 2,700 miles, while servo standby modes and automatic servo off modes...
Read More »
Linear Actuators offer alternative to air cylinders.
Available in Slider or Standard Rod versions, ROBO Cylinder ERC2 Series includes built-in position controller that allows user to select from up to 3 operation patterns and 4 positioning methods. Actuators convert revolutions of electrical motor to linear motion force. AQ seals supply lubricating oil during operation to ensure maintenance-free period of up to 3,100 miles, while servo standby...
Read More »