Artesyn Communication Products, LLC

Architectural & Civil Engineering Products

ATCA Packet Processing Blade features up to 6 processors.

KatanaPPB AdvancedTCA (ATCA) multiprocessor telecom blade combines PowerPC 7447A processors, multiprocessor interconnect with separate control and data planes, and redundant IPMI-based system management interfaces. It also features PICMG 3.1-compliant ATCA interface with 10 Gb Ethernet channels. PICMG 3.0 Intelligent Platform Management Interface enables shelf management controllers to monitor,...

Read More »
DC/DC Converters meet needs of processor-equipped loads.
Electrical Equipment & Systems

DC/DC Converters meet needs of processor-equipped loads.

Typhoon(TM) isolated Â-¼-brick converters include 1.2 V Model LQS100A48-1V2, offering full load efficiency of 84.5%, and 1.8 V Model LQS80A48-1V8 providing 89.7% efficiency at full load. Units operate from 48 V input over full 36-75 Vdc input voltage range, and offer adjustable output voltage from 110% down to 80% of nominal value. They include short circuit, over-voltage, and thermal...

Read More »
DC/DC Converters deliver VRM9.1 compliant CPU power management.
Electrical Equipment & Systems

DC/DC Converters deliver VRM9.1 compliant CPU power management.

Models NXI100 and NXI150 non-isolated, point-of-load DC/DC converters power Intel's Xeon(TM) and Pentium 4 processors. They deliver up to 75 A continuous, 81 A peak at user-programmable voltage from 1.10-1.85 V using standard 5-bit VID codes. Both operate from nominal 12 V input. Multi-phase synchronous rectification techniques with interleaving achieve switching frequency of 1MHz. Converters...

Read More »
DC/DC Converters operate without heatsink.
Electrical Equipment & Systems

DC/DC Converters operate without heatsink.

Typhoon(TM) open-frame, single-board converters use synchronous rectification, and employ surface-mount components and planar, in-the-board transformer structures to limit height to 0.3 in. Single-output, 1/8 brick model offers 1.8 V output and delivers up to 40 A with 89% efficiency at full load. Dual-output, Â-¼ brick models offer 3.3/1.2 V or 3.3/1.8 V independently regulated output...

Read More »
Point-of-Load Converter provides all-in-one power solution.
Electrical Equipment & Systems

Point-of-Load Converter provides all-in-one power solution.

Dual-output, non-isolated, point-of-load (POL) converter for DDR (double data rate) memory, DDR12, enables 2.5 V VDDQ supply for DDR logic and 1.25 V DDR termination voltage (VTT) to be derived from single module. Unit employs synchronous rectification techniques and has 85% conversion efficiency when operated at half-load or greater. The 2.5 V VDDQ output delivers up to 25 A, and 1.25 V VTT...

Read More »
Converters provide 95% efficiency.
Electrical Equipment & Systems

Converters provide 95% efficiency.

Non-isolated, point-of-load (POL), 10 A DC/DC Series SIL10, for use with 3.3 and 5.0 V on-board bus levels, employs synchronous-buck topology, using fixed-frequency switching and low on-resistance MOSFETs. Power density is 107 W/in3. Fixed-output converter provides 8 voltages from 0.8 to 3.3 V, and accommodates input voltage of 3.0 to 5.5 V. Wide-output trim model requires 4.5 to 5.5 V input....

Read More »
DC/DC Converters suit computer workstations and PCs.
Electrical Equipment & Systems

DC/DC Converters suit computer workstations and PCs.

Single-output, non-isolated, point-of-load (POL) converters employ open-frame single-board construction and fixed-frequency switching technology. All converters offer adjustable output and are suited for through-hole board mounting. SIL06 converters handle output currents up to 6A, with input voltages of 5 and 12 Vdc; SIL15 units handle output currents to 15A with input voltages of 5 and 12 Vdc,...

Read More »
DC/DC Converter Series has no minimum load requirement.
Electrical Equipment & Systems

DC/DC Converter Series has no minimum load requirement.

Surface-mount SXQ50 DC/DC converter series features outputs up to 50 W from quarter-brick, open-frame package which measures 2.3 x 1.46 x 0.4 in. Series employs fixed-frequency switching technology, and is available in four models with 5.0, 3.3, 2.5, or 1.8 V outputs (which can be trimmed from 90% to 110% of nominal). Units are rated to 20 A (1.8 and 2.5 V models), 15 A (3.3 V unit), and 10 A...

Read More »
DC/DC Converters have synchronous rectifier design.
Electrical Equipment & Systems

DC/DC Converters have synchronous rectifier design.

Half-brick EXB100 100 W modules, available with single outputs, include: 5 V model rated at 20 A; and 3.3 V and 1.8 V models rated at 30A. The 1.8 V model can be trimmed down to just 1.08 V, yet still deliver full 30 A rated output. Input voltages range from 36 to 75 Vdc, with 1500 Vdc isolation rating. Converters include remote on/off facility, and are protected against over-voltage,...

Read More »
Architectural & Civil Engineering Products

Conferencing Platform delivers unlimited scalability.

MediaBlade 2.0 N-Way high density, board-level, conferencing platform supports up to 240 conferees per board in any number of configurations, and allows up to 20 active speaking participants in each voice conference. N-Way conferencing platform provides support for both IP and PSTN participants. It delivers non-blocking and true N-way audio mixing conferencing, performs compression and...

Read More »
Company News

Artesyn Communication Products and Surf Communication Solutions Partner to Offer Triple-Play Media Gateway and Server Blades

Madison, WI. - November 17, 2005 -- Artesyn Communication Products, a subsidiary of Artesyn Technologies (Nasdaq: ATSN), today announced that it has partnered with Surf Communications Solutions ( Surf ) to develop open architecture, Triple-Play voice, video, and data (fax/modem) media processing solutions. Artesyn will combine its PICMG 2.16 and AdvancedTCA blades with Surf's PTMC and AdvancedMC...

Read More »
Mergers & Acquisitions

Artesyn Partners with MontaVista to Offer Carrier Grade Linux for AdvancedTCA Telecom Blades and AdvancedMC modules

Madison, WI. -- September 20, 2005 -- Artesyn Communication Products, a subsidiary of Artesyn Technologies (Nasdaq: ATSN), today announced that it has partnered with MontaVista to offer MontaVista Linux Carrier Grade Edition (CGE) for its telecom blades and modules. Artesyn will offer bundled, certified MontaVista CGE solutions for its PICMG 2.16, AdvancedTCA, AdvancedMC, ProcessorPMC blades and...

Read More »
Architectural & Civil Engineering Products

ATCA Packet Processing Blade features up to 6 processors.

KatanaPPB AdvancedTCA (ATCA) multiprocessor telecom blade combines PowerPC 7447A processors, multiprocessor interconnect with separate control and data planes, and redundant IPMI-based system management interfaces. It also features PICMG 3.1-compliant ATCA interface with 10 Gb Ethernet channels. PICMG 3.0 Intelligent Platform Management Interface enables shelf management controllers to monitor,...

Read More »
DC/DC Converters meet needs of processor-equipped loads.
Electrical Equipment & Systems

DC/DC Converters meet needs of processor-equipped loads.

Typhoon(TM) isolated Â-¼-brick converters include 1.2 V Model LQS100A48-1V2, offering full load efficiency of 84.5%, and 1.8 V Model LQS80A48-1V8 providing 89.7% efficiency at full load. Units operate from 48 V input over full 36-75 Vdc input voltage range, and offer adjustable output voltage from 110% down to 80% of nominal value. They include short circuit, over-voltage, and thermal...

Read More »
DC/DC Converters deliver VRM9.1 compliant CPU power management.
Electrical Equipment & Systems

DC/DC Converters deliver VRM9.1 compliant CPU power management.

Models NXI100 and NXI150 non-isolated, point-of-load DC/DC converters power Intel's Xeon(TM) and Pentium 4 processors. They deliver up to 75 A continuous, 81 A peak at user-programmable voltage from 1.10-1.85 V using standard 5-bit VID codes. Both operate from nominal 12 V input. Multi-phase synchronous rectification techniques with interleaving achieve switching frequency of 1MHz. Converters...

Read More »
DC/DC Converters operate without heatsink.
Electrical Equipment & Systems

DC/DC Converters operate without heatsink.

Typhoon(TM) open-frame, single-board converters use synchronous rectification, and employ surface-mount components and planar, in-the-board transformer structures to limit height to 0.3 in. Single-output, 1/8 brick model offers 1.8 V output and delivers up to 40 A with 89% efficiency at full load. Dual-output, Â-¼ brick models offer 3.3/1.2 V or 3.3/1.8 V independently regulated output...

Read More »
Point-of-Load Converter provides all-in-one power solution.
Electrical Equipment & Systems

Point-of-Load Converter provides all-in-one power solution.

Dual-output, non-isolated, point-of-load (POL) converter for DDR (double data rate) memory, DDR12, enables 2.5 V VDDQ supply for DDR logic and 1.25 V DDR termination voltage (VTT) to be derived from single module. Unit employs synchronous rectification techniques and has 85% conversion efficiency when operated at half-load or greater. The 2.5 V VDDQ output delivers up to 25 A, and 1.25 V VTT...

Read More »
Converters provide 95% efficiency.
Electrical Equipment & Systems

Converters provide 95% efficiency.

Non-isolated, point-of-load (POL), 10 A DC/DC Series SIL10, for use with 3.3 and 5.0 V on-board bus levels, employs synchronous-buck topology, using fixed-frequency switching and low on-resistance MOSFETs. Power density is 107 W/in3. Fixed-output converter provides 8 voltages from 0.8 to 3.3 V, and accommodates input voltage of 3.0 to 5.5 V. Wide-output trim model requires 4.5 to 5.5 V input....

Read More »
DC/DC Converters suit computer workstations and PCs.
Electrical Equipment & Systems

DC/DC Converters suit computer workstations and PCs.

Single-output, non-isolated, point-of-load (POL) converters employ open-frame single-board construction and fixed-frequency switching technology. All converters offer adjustable output and are suited for through-hole board mounting. SIL06 converters handle output currents up to 6A, with input voltages of 5 and 12 Vdc; SIL15 units handle output currents to 15A with input voltages of 5 and 12 Vdc,...

Read More »
DC/DC Converter Series has no minimum load requirement.
Electrical Equipment & Systems

DC/DC Converter Series has no minimum load requirement.

Surface-mount SXQ50 DC/DC converter series features outputs up to 50 W from quarter-brick, open-frame package which measures 2.3 x 1.46 x 0.4 in. Series employs fixed-frequency switching technology, and is available in four models with 5.0, 3.3, 2.5, or 1.8 V outputs (which can be trimmed from 90% to 110% of nominal). Units are rated to 20 A (1.8 and 2.5 V models), 15 A (3.3 V unit), and 10 A...

Read More »

All Topics