Emerson
Saint Louis, MO 63136
Share:
New Ultrasonic Metal Spot Welder Programmed Through Touchscreen HMI
GMX-20MA bonds nonferrous metals, including bus bars, foils, switches and wire terminations. Ensures smooth vertical motion and more precise downforce control for maximum weld quality and repeatability. Built around rigid pneumatic actuator with dual linear bearings and a digital load cell.
Read More »
Emerson Motors and Drives Deliver Upgrade at Champagne Producer
Nicolas Feuillatte, the globally recognised champagne producer, has chosen Emerson to deliver improvements to its bottling line. The Centre Vinicole - Champagne Nicolas Feuillatte (CV-CNF) is the leading Champagne producers’ union. It comprises 80 cooperatives and represents over 5,000 wine-growers. Its facility in Chouilly, in the Marne region, is one of the most automated plants of its type,...
Read More »
The RIDGID® SeeSnake® Compact2 Camera Reel and CS6Pak Digital Recording Monitor Team up to Get Results Quicker
The RIDGID® SeeSnake® Compact2 Camera Reel and CS6Pak Digital Recording Monitor Team Up To Get Results Quicker ELYRIA, OHIO – The new RIDGID® SeeSnake® CS6Pak Digital Recording Monitor, combined with the Compact2 Camera Reel, allows users to generate high-quality multimedia for thorough and efficient reporting. The SeeSnake Compact2, which delivers a host of new features...
Read More »Stepper Motor comes in 35 and 42 mm sizes.
Direct drive Model LS offers step angle of 7.5°, positional accuracy of ±5% max, and 4 phase bi-filar. Unit is also available as geared motor, which includes Model A gearbox and offers up to 150 oz in. of torque. Model LS is suitable for use in medical lab equipment, agitating/stirring machines, mail metering machines, and small printing equipment.
Read More »Motors comply 100% with NEMA Premium(TM) efficiency levels.
Totally enclosed, fan-cooled (TEFC) and open drip-proof (ODP) motors include 3-phase ODP motors rated at 1 to 250 hp and general purpose, 3-phase TEFC motors rated at 1 to 200 hp. Motors include Unimount®, Hostile Duty®, Corro-Duty, and 841 PLUS®. TEFC and ODP motors in 200 to 500 hp range are also available. Motors are inverter ready, resistant to power quality problems, and...
Read More »Washdown Motors resist rust and corrosion.
Paint free motors are offered in 1/2, 3/4, 1, 1Â-½, and 2 HP, and operate at 1725 rpm on 208-230/460 Vac power. NEMA 56 HC frames are available for motors with ratings of 1/2 through 1 HP, and NEMA 145TC frames are matched with 1 through 2 HP rated motors. Washdown motors resist water entry and drain condensation via their VBX INPRO/SEAL® shaft seal, T drains, and nitrile conduit box...
Read More »Washdown Motors work in high humidity environments
Paint free, stainless steel motors resist water entry, drain condensation, and have smooth motor frame that will not trap food particles that could lead to foodborne illnesses. Motors are available in 1/2, 3/4, 1, 1 1/2, and 2 hp. All operate at 1725 rpm on 208-230/460 Vac power. All are equipped with NEMA C-Face and rigid base and meet National Electrical Manufacturers Associations' MG1, Part 31...
Read More »Cooling Tower Motors handle hostile environments.
Epact and NEMA Premium(TM) cooling tower duty replacement motors operate in extreme humidity conditions and corrosive environments. Motors have double-sealed bearings, potted leads, bearing caps on 280 Frame and above, heavy gasketed conduit box and cover, sealed lead openings, sealed bracket-to-frame registers, and umbrella-type seal for shaft-up mounting. Motors are available in 2 to 100 hp....
Read More »Vertical Pump Motor directly replaces less efficient motors.
Mod-Max meets NEMA premium motor efficiency standards, operates 0.8 to 4.0% more efficiently than company's older, less efficient motors, and can be used for VFD applications. Canopy cap requires no gasket and has 3 stand-offs to allow air circulation to help prevent moisture condensation. Winding includes pulse endurance wire. Each winding is also treated with 100% solids insulation material....
Read More »
New Ultrasonic Metal Spot Welder Programmed Through Touchscreen HMI
GMX-20MA bonds nonferrous metals, including bus bars, foils, switches and wire terminations. Ensures smooth vertical motion and more precise downforce control for maximum weld quality and repeatability. Built around rigid pneumatic actuator with dual linear bearings and a digital load cell.
Read More »Emerson Acquires IntelliSAW Business
Acquisition adds monitoring capabilities for critical electrical power transmission and distribution equipment ST. LOUISÂ- - Emerson has acquired IntelliSAW Inc., a leading provider of systems that protect electric power transmission and distribution equipment by measuring and monitoring temperature, humidity, and partial discharge using advanced sensor and analytic technologies. The...
Read More »
Emerson Motors and Drives Deliver Upgrade at Champagne Producer
Nicolas Feuillatte, the globally recognised champagne producer, has chosen Emerson to deliver improvements to its bottling line. The Centre Vinicole - Champagne Nicolas Feuillatte (CV-CNF) is the leading Champagne producers’ union. It comprises 80 cooperatives and represents over 5,000 wine-growers. Its facility in Chouilly, in the Marne region, is one of the most automated plants of its type,...
Read More »
The RIDGID® SeeSnake® Compact2 Camera Reel and CS6Pak Digital Recording Monitor Team up to Get Results Quicker
The RIDGID® SeeSnake® Compact2 Camera Reel and CS6Pak Digital Recording Monitor Team Up To Get Results Quicker ELYRIA, OHIO – The new RIDGID® SeeSnake® CS6Pak Digital Recording Monitor, combined with the Compact2 Camera Reel, allows users to generate high-quality multimedia for thorough and efficient reporting. The SeeSnake Compact2, which delivers a host of new features...
Read More »Stepper Motor comes in 35 and 42 mm sizes.
Direct drive Model LS offers step angle of 7.5°, positional accuracy of ±5% max, and 4 phase bi-filar. Unit is also available as geared motor, which includes Model A gearbox and offers up to 150 oz in. of torque. Model LS is suitable for use in medical lab equipment, agitating/stirring machines, mail metering machines, and small printing equipment.
Read More »Motors comply 100% with NEMA Premium(TM) efficiency levels.
Totally enclosed, fan-cooled (TEFC) and open drip-proof (ODP) motors include 3-phase ODP motors rated at 1 to 250 hp and general purpose, 3-phase TEFC motors rated at 1 to 200 hp. Motors include Unimount®, Hostile Duty®, Corro-Duty, and 841 PLUS®. TEFC and ODP motors in 200 to 500 hp range are also available. Motors are inverter ready, resistant to power quality problems, and...
Read More »Washdown Motors resist rust and corrosion.
Paint free motors are offered in 1/2, 3/4, 1, 1Â-½, and 2 HP, and operate at 1725 rpm on 208-230/460 Vac power. NEMA 56 HC frames are available for motors with ratings of 1/2 through 1 HP, and NEMA 145TC frames are matched with 1 through 2 HP rated motors. Washdown motors resist water entry and drain condensation via their VBX INPRO/SEAL® shaft seal, T drains, and nitrile conduit box...
Read More »Washdown Motors work in high humidity environments
Paint free, stainless steel motors resist water entry, drain condensation, and have smooth motor frame that will not trap food particles that could lead to foodborne illnesses. Motors are available in 1/2, 3/4, 1, 1 1/2, and 2 hp. All operate at 1725 rpm on 208-230/460 Vac power. All are equipped with NEMA C-Face and rigid base and meet National Electrical Manufacturers Associations' MG1, Part 31...
Read More »Cooling Tower Motors handle hostile environments.
Epact and NEMA Premium(TM) cooling tower duty replacement motors operate in extreme humidity conditions and corrosive environments. Motors have double-sealed bearings, potted leads, bearing caps on 280 Frame and above, heavy gasketed conduit box and cover, sealed lead openings, sealed bracket-to-frame registers, and umbrella-type seal for shaft-up mounting. Motors are available in 2 to 100 hp....
Read More »Vertical Pump Motor directly replaces less efficient motors.
Mod-Max meets NEMA premium motor efficiency standards, operates 0.8 to 4.0% more efficiently than company's older, less efficient motors, and can be used for VFD applications. Canopy cap requires no gasket and has 3 stand-offs to allow air circulation to help prevent moisture condensation. Winding includes pulse endurance wire. Each winding is also treated with 100% solids insulation material....
Read More »