Deltrol Controls

Proportional Solenoid Valve controls flow of water.
Fluid & Gas Flow Equipment

Proportional Solenoid Valve controls flow of water.

Handling media at temperatures up to 200°F, proportional solenoid valve performs at operating pressures up to 90 psi and achieves flow rates up to 1.7 fluid oz/sec. Polyethersulfone valve body and EPDM seal meet requirements of beverage equipment applications, and valve can achieve flow rate from 0%-100% as regulated by power input to coil. With proper feedback mechanism and drive...

Read More »
New Valve Body Options for DSVP11 Dispensing Valve
Fluid & Gas Flow Equipment

New Valve Body Options for DSVP11 Dispensing Valve

Deltrol Controls has released new valve body options for their DSVP11 liquid dispensing valve. The DSVP11 will now be available with following new valve body options: o Right Angle flow with G1/2 threads on the inlet and outlet ports o Inline flow with barb fittings on the inlet and outlet ports Liquid Dispensing Valves are 2-way, direct-acting valves used to control the flow of low-pressure (

Read More »
Solenoids offer pulse width modulation.
Electronic Components & Devices

Solenoids offer pulse width modulation.

PWM Series increases force by up to 300% in continuous duty applications. Integral add-on module controls current to solenoid to provide high initial starting force. It then drops current back after predetermined time. PWM Solenoids are suitable where external solid-state control platform is not available to regulate current and for applications with 2.5 to 25 lb force requirement.

Read More »
Inlet Valves are available with straight or 90 deg bodies.
Fluid & Gas Flow Equipment

Inlet Valves are available with straight or 90 deg bodies.

DSVP40 Series handles water pressures from 3 to 145 psi with internal flow regulation. Plastic bodied units offer inlet screen and chloramine resistant components. 3 models are available covering single and dual output versions. Inlet connections consist of either external 3/4 in. hose thread or internal 3/8 NPT brass fitting. Outlets utilize barb connection or 7/16-20 UNF thread. Other features...

Read More »
Power Relay is compact alternative for many 2-pole uses.
Electrical Equipment & Systems

Power Relay is compact alternative for many 2-pole uses.

276 Series relay comes in SPST, SPDT, DPST, and DPDT contact configurations and is rated at 35 A, 250 Vac, 50 Hz for both UL and IEC codes (SEMKO) and all contact configurations (NO and NC). Coil voltages of 6-125 Vdc are available. Relay has molded coils for heat dissipation and resistance to dust and moisture; barrier-type 0.250 in. quick-connect terminals; plastic dust covers with flange...

Read More »
Dispense Valve offers twist apart design.
Fluid & Gas Flow Equipment

Dispense Valve offers twist apart design.

DSVP12 gravity fed valve dispenses water and water based media from non-pressurized tanks. Conical diaphragm uses surface wipe action to keep valve seat free of lime and mineral buildup. Unit features Class F molded coils and internal rectified AC coil that provides noise-free AC operation. Variety of diaphragm and body materials are available allowing valve to handle hot and cold as well as...

Read More »
Proportional Solenoid Valve controls flow of water.
Fluid & Gas Flow Equipment

Proportional Solenoid Valve controls flow of water.

Handling media at temperatures up to 200°F, proportional solenoid valve performs at operating pressures up to 90 psi and achieves flow rates up to 1.7 fluid oz/sec. Polyethersulfone valve body and EPDM seal meet requirements of beverage equipment applications, and valve can achieve flow rate from 0%-100% as regulated by power input to coil. With proper feedback mechanism and drive...

Read More »
New Valve Body Options for DSVP11 Dispensing Valve
Fluid & Gas Flow Equipment

New Valve Body Options for DSVP11 Dispensing Valve

Deltrol Controls has released new valve body options for their DSVP11 liquid dispensing valve. The DSVP11 will now be available with following new valve body options: o Right Angle flow with G1/2 threads on the inlet and outlet ports o Inline flow with barb fittings on the inlet and outlet ports Liquid Dispensing Valves are 2-way, direct-acting valves used to control the flow of low-pressure (

Read More »
Company News

Deltrol Controls at AVEX Show in April 2007!

January 16, 2007 Deltrol Controls will be exhibiting at the AVEX International Vending Exhibition in London April 24-26, 2007. Our stand will be located in space H10. We will be highlighting new products that will be announced early next year. Addtionally, we will be showcasing our existing product lines.

Read More »
Solenoids offer pulse width modulation.
Electronic Components & Devices

Solenoids offer pulse width modulation.

PWM Series increases force by up to 300% in continuous duty applications. Integral add-on module controls current to solenoid to provide high initial starting force. It then drops current back after predetermined time. PWM Solenoids are suitable where external solid-state control platform is not available to regulate current and for applications with 2.5 to 25 lb force requirement.

Read More »
Inlet Valves are available with straight or 90 deg bodies.
Fluid & Gas Flow Equipment

Inlet Valves are available with straight or 90 deg bodies.

DSVP40 Series handles water pressures from 3 to 145 psi with internal flow regulation. Plastic bodied units offer inlet screen and chloramine resistant components. 3 models are available covering single and dual output versions. Inlet connections consist of either external 3/4 in. hose thread or internal 3/8 NPT brass fitting. Outlets utilize barb connection or 7/16-20 UNF thread. Other features...

Read More »
Power Relay is compact alternative for many 2-pole uses.
Electrical Equipment & Systems

Power Relay is compact alternative for many 2-pole uses.

276 Series relay comes in SPST, SPDT, DPST, and DPDT contact configurations and is rated at 35 A, 250 Vac, 50 Hz for both UL and IEC codes (SEMKO) and all contact configurations (NO and NC). Coil voltages of 6-125 Vdc are available. Relay has molded coils for heat dissipation and resistance to dust and moisture; barrier-type 0.250 in. quick-connect terminals; plastic dust covers with flange...

Read More »
Dispense Valve offers twist apart design.
Fluid & Gas Flow Equipment

Dispense Valve offers twist apart design.

DSVP12 gravity fed valve dispenses water and water based media from non-pressurized tanks. Conical diaphragm uses surface wipe action to keep valve seat free of lime and mineral buildup. Unit features Class F molded coils and internal rectified AC coil that provides noise-free AC operation. Variety of diaphragm and body materials are available allowing valve to handle hot and cold as well as...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers