Cortec Corp.
Saint Paul, MN 55110
Share:
Microbial Cleaner is non-toxic and non-hazardous.
Blending coconut oil phospholipids, green corrosion inhibitors, and surfactants, BioClean Spray is designed to disperse and inhibit microbiological growth. It eliminates existing microbiological contamination as well as provides prevention of future growth. Biodegradable and manufactured from renewable resources, solution comes in EcoAirÃ-® spray cans without propellants, as BioClean Wipes...
Read More »Cleaner/Degreaser protects metal parts from corrosion.
VpCI(TM)-418 LM non-foaming, heavy-duty alkaline cleaner/degreaser is suited for cleaning industrial, oil field, commercial, marine equipment, and parts. It contains Vapor phase Corrosion Inhibitors (VpCI(TM)) and is nitrite-free, non-toxic, and silicate free. Able to remove heavy hydrocarbons, greases, drawing, and buffing compounds, as well as mill and machinery oils, it leaves no residual film...
Read More »Corrosion Inhibiting Powder protects ferrous metals.
Designed for wet or dry corrosion protection of ferrous metals and aluminum, VpCI 609Ã-® Biodegradable Powder creates monomolecular inhibiting layer on metal surface that lasts for up to 24 continuous months. Water-soluble Vapor phase Corrosion Inhibitor (VpCI(TM)) powder does not contain nitrites or phosphates and can be applied in dry form by dusting, fogging, or sprinkling or in aqueous...
Read More »
Bio-Based Soybean Chemistry Enhances Long-Term Rust Protection and Improves Safety
CortecÃ-® Corporation, in its continuing advancement in green chemistry, has enhanced its EcoLineÃ-® Long-Term Rust Preventive. The product is now verified as 85% bio-based by tests conducted at the Iowa State University as part of the EPA's Federal Bio-based Product Preferred Procurement Program (FB4P), dictated by the Farm Bill of 2002. EcoLineÃ-® Long-Term Rust Preventive is...
Read More »Additive fights scale deposits, sludge, and corrosion.
Combining organic phosphorous compounds, polymers, and aromatic azoles, VpCI(TM)-647 protects ferrous and non-ferrous metals. Designed for open-loop cooling water systems, product forms thin inhibiting film on metal to prevent corrosion and pitting to parts in direct contact with solution. Then, vapor phase action protects parts that are not in direct contact with solution. Non-toxic,...
Read More »
Packaging Film protects ultra-sensitive electronics.
Polyester-based Eco-CorrÃ-® ESD is suitable for shrouds, sheeting, and bags used for storage or transit protection of electronics. While in use, film continuously emits protective vapor of VpCI corrosion inhibitors that actively saturate air, providing clean, multi-metal corrosion protection. In less than 0.2 sec, product dissipates static, preventing damage to electronics. Film biodegrades...
Read More »
Powder offers treatment for cooling systems lay-up.
Based on Vapor Phase Corrosion Inhibitors, Cooling Loop GatorÃ-® diffuses through air or water towards metal surfaces, reaching inaccessible/recessed areas, and forming strong molecular layer. Biodegradable, non-toxic product is designed for seasonal, wet or dry, short- or long-term lay-up, providing corrosion protection for up to 12 months. Packaged in water-soluble PVA bag, Cooling Loop...
Read More »
Polyethylene Packaging prevents corrosion and ESD damage.
Suited for highly sensitive electronic components, VpCI(TM)-125 Film and Bags contain blend of Vapor Phase Corrosion Inhibitors and ultra-high ESD chemistries, providing dual-purpose protection. Products protect metal surfaces and contacts of electronic components, as well as actively passivate all enclosed void spaces within package. Self-healing, non-toxic packaging qualifies to MIL-PRF-81705D...
Read More »Acrylic Coating provides corrosion protection.
Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or...
Read More »
Rust Preventive is 85% bio-based.
Utilizing soybean derivative methyl esters in conjunction with Vapor Phase Corrosion Inhibitor chemistry, EcoLine(TM) Long Term Rust Preventive provides up to 24 months of indoor protection and up to 6 months outdoor protection for multi-metal parts. Product cuts through surface contamination and other fluids, helping to loosen frozen and rusted areas. Compatible with environmental and user...
Read More »Cortec-® Announces Laboratory Accreditation
CortecÃ-® is proud to announce the ISO/IEC 17025:2005 accreditation of Cortec's Laboratory by the Laboratory Accreditation Bureau. Cortec's Laboratory in St. Paul, Minnesota, has been in operation for over 20 years, and has dedicated its time to providing customers worldwide with a variety of testing; including analytical, electro-chemical, and corrosion analysis. With this accreditation,...
Read More »Microbial Cleaner is non-toxic and non-hazardous.
Blending coconut oil phospholipids, green corrosion inhibitors, and surfactants, BioClean Spray is designed to disperse and inhibit microbiological growth. It eliminates existing microbiological contamination as well as provides prevention of future growth. Biodegradable and manufactured from renewable resources, solution comes in EcoAirÃ-® spray cans without propellants, as BioClean Wipes...
Read More »Cleaner/Degreaser protects metal parts from corrosion.
VpCI(TM)-418 LM non-foaming, heavy-duty alkaline cleaner/degreaser is suited for cleaning industrial, oil field, commercial, marine equipment, and parts. It contains Vapor phase Corrosion Inhibitors (VpCI(TM)) and is nitrite-free, non-toxic, and silicate free. Able to remove heavy hydrocarbons, greases, drawing, and buffing compounds, as well as mill and machinery oils, it leaves no residual film...
Read More »Corrosion Inhibiting Powder protects ferrous metals.
Designed for wet or dry corrosion protection of ferrous metals and aluminum, VpCI 609Ã-® Biodegradable Powder creates monomolecular inhibiting layer on metal surface that lasts for up to 24 continuous months. Water-soluble Vapor phase Corrosion Inhibitor (VpCI(TM)) powder does not contain nitrites or phosphates and can be applied in dry form by dusting, fogging, or sprinkling or in aqueous...
Read More »
Bio-Based Soybean Chemistry Enhances Long-Term Rust Protection and Improves Safety
CortecÃ-® Corporation, in its continuing advancement in green chemistry, has enhanced its EcoLineÃ-® Long-Term Rust Preventive. The product is now verified as 85% bio-based by tests conducted at the Iowa State University as part of the EPA's Federal Bio-based Product Preferred Procurement Program (FB4P), dictated by the Farm Bill of 2002. EcoLineÃ-® Long-Term Rust Preventive is...
Read More »Additive fights scale deposits, sludge, and corrosion.
Combining organic phosphorous compounds, polymers, and aromatic azoles, VpCI(TM)-647 protects ferrous and non-ferrous metals. Designed for open-loop cooling water systems, product forms thin inhibiting film on metal to prevent corrosion and pitting to parts in direct contact with solution. Then, vapor phase action protects parts that are not in direct contact with solution. Non-toxic,...
Read More »
Packaging Film protects ultra-sensitive electronics.
Polyester-based Eco-CorrÃ-® ESD is suitable for shrouds, sheeting, and bags used for storage or transit protection of electronics. While in use, film continuously emits protective vapor of VpCI corrosion inhibitors that actively saturate air, providing clean, multi-metal corrosion protection. In less than 0.2 sec, product dissipates static, preventing damage to electronics. Film biodegrades...
Read More »
Powder offers treatment for cooling systems lay-up.
Based on Vapor Phase Corrosion Inhibitors, Cooling Loop GatorÃ-® diffuses through air or water towards metal surfaces, reaching inaccessible/recessed areas, and forming strong molecular layer. Biodegradable, non-toxic product is designed for seasonal, wet or dry, short- or long-term lay-up, providing corrosion protection for up to 12 months. Packaged in water-soluble PVA bag, Cooling Loop...
Read More »
Polyethylene Packaging prevents corrosion and ESD damage.
Suited for highly sensitive electronic components, VpCI(TM)-125 Film and Bags contain blend of Vapor Phase Corrosion Inhibitors and ultra-high ESD chemistries, providing dual-purpose protection. Products protect metal surfaces and contacts of electronic components, as well as actively passivate all enclosed void spaces within package. Self-healing, non-toxic packaging qualifies to MIL-PRF-81705D...
Read More »Acrylic Coating provides corrosion protection.
Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or...
Read More »