Cashco, Inc.

End-of-Line Flame Arrestor ensures explosion protection.
Electronic Components & Devices

End-of-Line Flame Arrestor ensures explosion protection.

Acting as independent safety system, 6E00 end-of-line deflagration flame arrestor is designed on quenching gap principle and comes in various sizes. Threaded or flanged connections are available to fit multiple applications, and solid-state design minimizes maintenance requirements. Along with crimped SST metal element, features include flame cell element can be easily removed for inspection and...

Read More »
Sanitary Vent operates as breather valve.
Fluid & Gas Flow Equipment

Sanitary Vent operates as breather valve.

Designed to be used with VCI Model 1088 sanitary blanketing valve, Model 1100 operates at multiple set points as breather valve to avoid vacuum or over pressurization inside tank or piping system. Pressure set points range from 0.43–3.42 psi, while vacuum ranges from 0.069–0.385 psi, depending on size of unit. Offered in 2, 3, 4, and 6 in. sizes, vent comes in choice of 316 or 304 stainless...

Read More »
Pressure Reducing Regulator has in-line, stainless steel design.
Controls & Controllers

Pressure Reducing Regulator has in-line, stainless steel design.

Designed for sanitary biotechnical process piping systems, PL1 is capable of withstanding inlet pressures up to 400 psig and outlet pressures up to 135 psig. Self-draining body design and trims comply with ASME BPE 2012 SF-4, while insertion of pin and lanyard provide necessary means for SIP and CIP processes. USP Class VI PTFE soft seal or 316L stainless steel plug are available options, and...

Read More »
In-Line Back Pressure Regulator offers broad media compatibility.
Controls & Controllers

In-Line Back Pressure Regulator offers broad media compatibility.

Available in globe or angular porting configuration, Model BR supports use with diverse gases and liquids. ValveÂ- controls inlet pressures up to 200 psig in multiple spring ranges and can be utilized for industrial pressure relief. There are 5 sizes available from 3/8–2 in., and appropriate body/spring chamber and trim material combinations enable material handling capabilities from 20 to...

Read More »
Fluid & Gas Flow Equipment

In-Line Regulator Valve is designed for clean gas applications.

Weighing as little as 7 lb, Model BL1 can control inlet pressures up to 135 psig and is available with Â-½ and ¾ in. Tri-Clamp® body connections. All wetted, metal parts are 316L stainless steel and machined to meet SFV-4, while all soft goods meet FDA code of Regulations Title 21, Part 177 USP Class VI. Standard offerings include 316L stainless steel metal plug and standard...

Read More »
Controls & Controllers

Pressure Reducing Regulator is designed for gaseous applications.

Offered in Â-½ and ¾ in. Tri-Clamp® body connections, PA1 has self-draining body design and trims that comply with ASME BPE 2012 SF-4. All wetted, metal parts are constructed of 316L stainless steel. Capable of withstanding inlet pressures up to 250 psig and outlet pressures up to 135 psig, regulator also has EPDM diaphragm and also comes with option of...

Read More »
Controls & Controllers

Auxiliary Loaded Regulator can replace pressure control valve.

Featuring back pressure regulator mounted onto it, Model ALR-1 uses auxiliary air supply, such as air from compressor, to feed cover dome. Supply air must be environmentally safe since it will be constantly bleeding to atmosphere. CustomersÂ- can adjust setting at point of use with airset or through control room when mounted with I/P transducer. Suitable for applications when set points vary...

Read More »
Architectural & Civil Engineering Products

Cashco Achieves ISO 14001 Environmental Certification

ELLSWORTH, KANSAS - September 2010 - Cashco Inc. has always prided itself in being a leading supplier of American-made control valves and regulators that meet ISO 9001/2000 Quality Assurance Program standards. Now, Cashco has added another feather to its cap with an International Organization of Standards (ISO) 14001 certification for designing and implementing an effective environmental...

Read More »
More Commonality, Higher Performance. New Cashco Actuator Offers Greater Adaptability.
Mechanical Power Transmission

More Commonality, Higher Performance. New Cashco Actuator Offers Greater Adaptability.

Ellsworth, Kansas, USA - Designed for a new level of conformity, the new C27 actuator release from Cashco, Inc. promises to be a win/win product for both the manufacturer and its customers. Basically, the C27 actuator is the first of a new line of actuators that Cashco is in the process of introducing, which can be coupled to any one of several body assemblies or valve body models," says Cole...

Read More »
End-of-Line Flame Arrestor ensures explosion protection.
Electronic Components & Devices

End-of-Line Flame Arrestor ensures explosion protection.

Acting as independent safety system, 6E00 end-of-line deflagration flame arrestor is designed on quenching gap principle and comes in various sizes. Threaded or flanged connections are available to fit multiple applications, and solid-state design minimizes maintenance requirements. Along with crimped SST metal element, features include flame cell element can be easily removed for inspection and...

Read More »
Sanitary Vent operates as breather valve.
Fluid & Gas Flow Equipment

Sanitary Vent operates as breather valve.

Designed to be used with VCI Model 1088 sanitary blanketing valve, Model 1100 operates at multiple set points as breather valve to avoid vacuum or over pressurization inside tank or piping system. Pressure set points range from 0.43–3.42 psi, while vacuum ranges from 0.069–0.385 psi, depending on size of unit. Offered in 2, 3, 4, and 6 in. sizes, vent comes in choice of 316 or 304 stainless...

Read More »
Pressure Reducing Regulator has in-line, stainless steel design.
Controls & Controllers

Pressure Reducing Regulator has in-line, stainless steel design.

Designed for sanitary biotechnical process piping systems, PL1 is capable of withstanding inlet pressures up to 400 psig and outlet pressures up to 135 psig. Self-draining body design and trims comply with ASME BPE 2012 SF-4, while insertion of pin and lanyard provide necessary means for SIP and CIP processes. USP Class VI PTFE soft seal or 316L stainless steel plug are available options, and...

Read More »
In-Line Back Pressure Regulator offers broad media compatibility.
Controls & Controllers

In-Line Back Pressure Regulator offers broad media compatibility.

Available in globe or angular porting configuration, Model BR supports use with diverse gases and liquids. ValveÂ- controls inlet pressures up to 200 psig in multiple spring ranges and can be utilized for industrial pressure relief. There are 5 sizes available from 3/8–2 in., and appropriate body/spring chamber and trim material combinations enable material handling capabilities from 20 to...

Read More »
Fluid & Gas Flow Equipment

In-Line Regulator Valve is designed for clean gas applications.

Weighing as little as 7 lb, Model BL1 can control inlet pressures up to 135 psig and is available with Â-½ and ¾ in. Tri-Clamp® body connections. All wetted, metal parts are 316L stainless steel and machined to meet SFV-4, while all soft goods meet FDA code of Regulations Title 21, Part 177 USP Class VI. Standard offerings include 316L stainless steel metal plug and standard...

Read More »
Controls & Controllers

Pressure Reducing Regulator is designed for gaseous applications.

Offered in Â-½ and ¾ in. Tri-Clamp® body connections, PA1 has self-draining body design and trims that comply with ASME BPE 2012 SF-4. All wetted, metal parts are constructed of 316L stainless steel. Capable of withstanding inlet pressures up to 250 psig and outlet pressures up to 135 psig, regulator also has EPDM diaphragm and also comes with option of...

Read More »
Controls & Controllers

Auxiliary Loaded Regulator can replace pressure control valve.

Featuring back pressure regulator mounted onto it, Model ALR-1 uses auxiliary air supply, such as air from compressor, to feed cover dome. Supply air must be environmentally safe since it will be constantly bleeding to atmosphere. CustomersÂ- can adjust setting at point of use with airset or through control room when mounted with I/P transducer. Suitable for applications when set points vary...

Read More »
People in the News

Cashco Announces New Leadership

Ellsworth, Kansas, USA April 2011 - Cashco, Inc. recently announced that Clint Rogers has been promoted to General Manager from his previous position of Executive Vice President of Sales, Marketing and Engineering, effective April 15, 2011. In his new role, Rogers will be responsible for all activities related to the valve division, which includes manufacturing, purchasing and finance, in...

Read More »
Architectural & Civil Engineering Products

Cashco Achieves ISO 14001 Environmental Certification

ELLSWORTH, KANSAS - September 2010 - Cashco Inc. has always prided itself in being a leading supplier of American-made control valves and regulators that meet ISO 9001/2000 Quality Assurance Program standards. Now, Cashco has added another feather to its cap with an International Organization of Standards (ISO) 14001 certification for designing and implementing an effective environmental...

Read More »
More Commonality, Higher Performance. New Cashco Actuator Offers Greater Adaptability.
Mechanical Power Transmission

More Commonality, Higher Performance. New Cashco Actuator Offers Greater Adaptability.

Ellsworth, Kansas, USA - Designed for a new level of conformity, the new C27 actuator release from Cashco, Inc. promises to be a win/win product for both the manufacturer and its customers. Basically, the C27 actuator is the first of a new line of actuators that Cashco is in the process of introducing, which can be coupled to any one of several body assemblies or valve body models," says Cole...

Read More »

All Topics