Bell & Gossett
Morton Grove, IL 60053
Condition Monitor provides early warning of pump trouble.
Designed to continuously measure vibrations and temperature at pump power end, i-ALERT(TM) uses 2 red blinking LEDs to alert personnel when pump exceeds pre-set vibrations and temperature limits so that action can be taken before permanent damage occurs. Single green LED indicates when monitor is operational and has sufficient battery life. Operating in ambient temperatures of -40 to 212Ã-
Read More »Brazed Plate Heat Exchangers feature double-wall construction.
Designed with complete peripheral copper braze for strength and 4 dedicated leak ports for leak detection, BPX(TM) BPDW Series features design pressure of 435 psi and max design temperature of 450Ã-
Read More »Speed-Controlled Heating Circulator uses ECM technology.
Featuring spherical motor design, ecocircÃ-® pump uses ECM (Electronically Commutated Motor) technology to conserve energy while delivering hot water throughout commercial or residential properties. Control modes include auto for automatic proportional pressure control and vario for stepless speed control with constant curve. As sole moving part, rotor/impeller magnetically balanced on...
Read More »Submersible Pumps suit wastewater and drainage applications.
Featuring self-cleaning impeller and casing, Impact(TM) Series is designed for commercial and building services applications where wastewater or drainage must be disposed of quietly and efficiently. Impact MK model is equipped with air-filled motor, dual mechanical seal, and special seal chamber that optimizes pump efficiency. For low volume wastewater applications, Impact MV features vortex...
Read More »Bell & Gosset Introduces New Optiflo(TM) Control and Ultraset Valves at 2009 Ahr Expo
MORTON GROVE, Illinois, January 23, 2009 - Bell & Gossett introduces its new OPTIFLO(TM) Pressure Independent Control Valve and Circuit SetterÃ-® ULTRASET(TM) Valve at the 2009 AHR EXPO in Chicago, January 26th. Both the OPTIFLOW and ULTRASET feature integrated pressure/temperature ports to easily verify differential pressure and temperatures. The OPTIFLO Valve combines an externally...
Read More »Bypass Valve controls excess flow in hydronic systems.
Designed for systems where heating loads may be excluded from circuit as zone valves close, Differential Bypass Valve helps minimize velocity noise caused by excess flow through circuits while maintaining pump head at constant valve. Unit features all brass body with non-ferrous internals and Ã-¾ in. connection. Installed horizontally or vertically, valve has max working pressure of 150 psig...
Read More »Bell & Gossett Introduces New Line of Air Vents
Morton Grove, Illinois - December 11, 2006 - A complete line of new manual and automatic air vents designed to remove troublesome air in a variety of hydronic systems is available from Bell & Gossett. Ranging from rugged high-capacity air vents for liquid systems to compacted air vents for new types of radiators, the new line includes: 107A - a rugged high-capacity air vent that purges free air...
Read More »Bell & Gossett Introduces New Line of Wastewater Pumps for Residential & Commercial Markets
Morton Grove, Illinois - October 31, 2006 - Bell & Gossett, the leading manufacturer and marketer of pumps and other fluid handling products for the commercial and residential HVAC industry, has unveiled a new line of pumps for the Wastewater marketplace. The company enters this new marketplace with a complete line of pumps and accessories including: o Sump, Sewage and Effluent (SES) Wastewater...
Read More »Air Separator comes in wide range of sizes.
Designed to automatically remove entrained air in hydronic heating systems, EASB-Jr. is available in Ã-¾, 1, and 1Ã-¼ in. sizes with NPT and sweat connections, as well as 1Ã-½ and 2 in. sizes with NPT connections. Unit features non-clog venting design, max working pressure of 150 psi, and max operating temperature of 250Ã-
Read More »Bell & Gossett Announces New Enhancements To Award-Winning ESP-PLUS-® Pump Selection Program
Morton Grove, Illinois July 31, 2006 - Bell & Gossett has announced the addition of a comprehensive new CAD library to its popular ESP-PLUSÃ-® online pump selection program. The program now includes 3-dimensional drawings and other new, important features that allow engineers to: o Download 2D and 3D files in several file formats, or directly insert into leading CAD systems like Inventor,...
Read More »Condition Monitor provides early warning of pump trouble.
Designed to continuously measure vibrations and temperature at pump power end, i-ALERT(TM) uses 2 red blinking LEDs to alert personnel when pump exceeds pre-set vibrations and temperature limits so that action can be taken before permanent damage occurs. Single green LED indicates when monitor is operational and has sufficient battery life. Operating in ambient temperatures of -40 to 212Ã-
Read More »Brazed Plate Heat Exchangers feature double-wall construction.
Designed with complete peripheral copper braze for strength and 4 dedicated leak ports for leak detection, BPX(TM) BPDW Series features design pressure of 435 psi and max design temperature of 450Ã-
Read More »Speed-Controlled Heating Circulator uses ECM technology.
Featuring spherical motor design, ecocircÃ-® pump uses ECM (Electronically Commutated Motor) technology to conserve energy while delivering hot water throughout commercial or residential properties. Control modes include auto for automatic proportional pressure control and vario for stepless speed control with constant curve. As sole moving part, rotor/impeller magnetically balanced on...
Read More »Submersible Pumps suit wastewater and drainage applications.
Featuring self-cleaning impeller and casing, Impact(TM) Series is designed for commercial and building services applications where wastewater or drainage must be disposed of quietly and efficiently. Impact MK model is equipped with air-filled motor, dual mechanical seal, and special seal chamber that optimizes pump efficiency. For low volume wastewater applications, Impact MV features vortex...
Read More »Former Bell & Gossett Little Red Schoolhouse Instructor Passes
MORTON GROVE, Illinois, February 23, 2011 - Bob DeWyze, former Director of ITT Bell & Gossett's Little Red Schoolhouse in Morton Grove, Illinois, for more than 40 years, recently passed away. DeWyze trained tens of thousands of HVACR professionals at one of the industry's most venerable educational institutions from the mid-1950s until his retirement in 1997. An ex-Marine and World War II...
Read More »Bell & Gossett's Little Red Schoolhouse Announces 2nd Quarter Schedule
MORTON GROVE, Illinois, February 16, 2011 - Bell & Gossett, a leader in education for the hydronic heating and plumbing industries, has announced its training course schedule for the second quarter 2011. The free training seminars are offered at the Bell & Gossett Little Red Schoolhouse Education Center in Morton Grove, Illinois, a suburb of Chicago and are open to engineers, contractors and...
Read More »New Lead-Free Potable Water Products Bulletin Available from ITT Bell & Gossett
MORTON GROVE, Illinois, June 2, 2010 - A new bulletin (A-151) describing the full line of Bell & Gossett lead-free potable water products is now available at www.bellgossett.com. Ranging from pumps and boosters to tanks and valves, the potable water products are offered in lead-free brass materials and meet the requirements of California's AB1953 and Vermont's S152 legislation, as well as exceed...
Read More »Bell & Gossett Little Red Schoolhouse-® Instructor Earns LEED-® Accredited Professional Designation
Morton Grove, IL - August 13, 2009 - Larry Konopacz, Manager of Training and Education at ITT Bell & Gossett's Little Red SchoolhouseÃ-® in Morton Grove, Illinois, has passed the Leadership in Energy and Environmental Design (LEEDÃ-® Accredited Professional examination for New Construction v2.2 and is now a LEED AP. Konopacz joined ITT in 1983 and has served in a variety of training,...
Read More »New Courses Announced for 2nd Quarter at Bell & Gossett's Little Red Schoolhouse
MORTON GROVE, Illinois, March 10, 2009 - Bell & Gossett, a leader in education for the hydronic heating and plumbing industries, has announced its training course schedule for the spring of 2009. The free training seminars are offered at the Bell & Gossett Little Red Schoolhouse Education Center in Morton Grove, Illinois, a suburb of Chicago and are open to engineers, contractors and facility...
Read More »Bell & Gosset Introduces New Optiflo(TM) Control and Ultraset Valves at 2009 Ahr Expo
MORTON GROVE, Illinois, January 23, 2009 - Bell & Gossett introduces its new OPTIFLO(TM) Pressure Independent Control Valve and Circuit SetterÃ-® ULTRASET(TM) Valve at the 2009 AHR EXPO in Chicago, January 26th. Both the OPTIFLOW and ULTRASET feature integrated pressure/temperature ports to easily verify differential pressure and temperatures. The OPTIFLO Valve combines an externally...
Read More »