AZCO Corp.

New Heat Seal Station from AZCO Corp. Replaces Pre-Made Pouches
Adhesives & Sealants

New Heat Seal Station from AZCO Corp. Replaces Pre-Made Pouches

Heat Seal Station comes with custom cut-to-length knife assembly, controller and an idler roller for unwinding roll of material in to the station. Unit’s controller allows user to change the length and width for larger pouches and to control the impulse sealer. Mounted on 1/2 in. thick aluminum plate, seal station features HMI touch screen for set up and operation. Unit is designed with two...

Read More »
Desiccant Dispenser with Horizontal Discharge
Material Handling & Storage

Desiccant Dispenser with Horizontal Discharge

AZCO Corp.’s Off-the-Shelf Desiccant Dispenser Can be Easily Customized Fairfield, NJ - August 18, 2017 - AZCO Corp.’s 5D SUR-PAK™ desiccant dispenser has seen great popularity due to its compact size, ease of use, and affordability. Customers appreciate the fact that they can run product from all manufacturers, allowing them the freedom of choice to get the most competitive pricing for...

Read More »
Build Custom Solutions Using Standard Modules
Controls & Controllers

Build Custom Solutions Using Standard Modules

Configure Stock Components to Meet Your Requirements Fairfield, NJ - May 10, 2017 - At the recent ICE USA 2017 exhibition in Orlando, FL, AZCO Corp. revealed a custom system built with their standard dancer unwind, slitter station, roll feeder, knife assembly, and rewind modules. Highlighted by a display of colorful LED lighting, visitors to the booth were treated to a clear picture of how a...

Read More »
Pouch Dispenser features motor-fed precision cutting.
Food Processing & Preparation

Pouch Dispenser features motor-fed precision cutting.

Designed to cut and dispense variety of materials of varying thicknesses, fed from continuous web, SUR-PAK™ VIP-100 is suited for desiccant, oxygen absorbers, food packs, and promotional items. Design includes timing screw, ensuring controlled and accurate insertion into bottles at speed of 200 cycles/min. Requiring 110 Vac, 50/60 Hz, single phase, and 30–90 psi supply of compressed air,...

Read More »
AZCO Corp. Designs Sheeter with Automated Stacking System
Packaging Products & Equipment

AZCO Corp. Designs Sheeter with Automated Stacking System

Fairfield, NJ – AZCO Corp. has designed a custom sheeter system which is used to unwind, cut and stack a 29 wide roll of .003" thick aluminum material. The process begins with the roll of material loaded onto a motorized single shaft unwind.-  The unwind is equipped with a dancer attachment and idler roller to maintain web tension and alignment.  All rollers are urethane coated for uniform...

Read More »
Tubing Cutter makes accurate cuts at 45
Food Processing & Preparation

Tubing Cutter makes accurate cuts at 45

Offering accuracy of ±0.1 in. at 3.9 in. lengths, Tubing Cutter can cut heavy and thin plastic or rubber non-wire reinforced tubing up to 1 in. diameter. Tubing is indexed by servo motor with dual drive tractor belt system. Replaceable knife cartridges can be set up for different angled cuts as well as standard perpendicular cuts.- Operated via touchscreen, cutter is equipped with pneumatically...

Read More »
Modular Punch Assemblies feature one-piece design.
Machinery & Machining Tools

Modular Punch Assemblies feature one-piece design.

Featuring punch-and-die design to make custom-shaped cut-outs, Modular Punch Assemblies can punch holes in flexible materials such as films, foils, paper, nonwovens, hose, tubing, tape, foam, rubber, mesh, laminates, and medical devices. Units are also capable of creating virtually invisible micro punches. Available in pneumatic or electric configurations, punch units use hardened-steel tooling...

Read More »
Food Processing & Preparation

Rotary Shear Cutter delivers hundreds of cuts per minute.

Featuring bolt-in, modular design, Rotary Shear Cutter is equipped with through-hardened D-2 tool steel blades and precision bearings that are designed to take high load forces. Rotary knife assemblies can be incorporated into new machines or inserted into existing process. In addition to- output shaft made to customer requirements, cutter includes mounting holes to facilitate installation.

Read More »
Test Strip Cutter reduces waste and tooling expense.
Food Processing & Preparation

Test Strip Cutter reduces waste and tooling expense.

Using- rotary shear cut blades driven by digital motors, touchscreen-operated AZCO test strip cutter allows original format of diagnostic test sheets to be cut into individual strips. First station cuts diagnostic sheet into 10 individual cards, and second station cuts cards into 50, 6 mm strips. After diagnostic sheet/card is fed into unit, it automatically cuts to size and feeds strips...

Read More »
Desiccant Dispenser provides material choice flexibility.
Material Handling & Storage

Desiccant Dispenser provides material choice flexibility.

With dimensions of 7 x 12 x 14 in. and plug-and-play design, 5D dispenser is compatible with all types of materials and offers freedom of choice to run all desiccants. Self-teaching optic technology embedded into cutting head provides ability to run different types of material through dispenser. Self-threading to- facilitate alignment of material, unit also has cantilever design that offers full...

Read More »
New Heat Seal Station from AZCO Corp. Replaces Pre-Made Pouches
Adhesives & Sealants

New Heat Seal Station from AZCO Corp. Replaces Pre-Made Pouches

Heat Seal Station comes with custom cut-to-length knife assembly, controller and an idler roller for unwinding roll of material in to the station. Unit’s controller allows user to change the length and width for larger pouches and to control the impulse sealer. Mounted on 1/2 in. thick aluminum plate, seal station features HMI touch screen for set up and operation. Unit is designed with two...

Read More »
Desiccant Dispenser with Horizontal Discharge
Material Handling & Storage

Desiccant Dispenser with Horizontal Discharge

AZCO Corp.’s Off-the-Shelf Desiccant Dispenser Can be Easily Customized Fairfield, NJ - August 18, 2017 - AZCO Corp.’s 5D SUR-PAK™ desiccant dispenser has seen great popularity due to its compact size, ease of use, and affordability. Customers appreciate the fact that they can run product from all manufacturers, allowing them the freedom of choice to get the most competitive pricing for...

Read More »
Build Custom Solutions Using Standard Modules
Controls & Controllers

Build Custom Solutions Using Standard Modules

Configure Stock Components to Meet Your Requirements Fairfield, NJ - May 10, 2017 - At the recent ICE USA 2017 exhibition in Orlando, FL, AZCO Corp. revealed a custom system built with their standard dancer unwind, slitter station, roll feeder, knife assembly, and rewind modules. Highlighted by a display of colorful LED lighting, visitors to the booth were treated to a clear picture of how a...

Read More »
Company News

Small Business Leading National Movement to Feed the Hungry

Fairfield, New Jersey - Corporations Feeding America is asking organizations across the United States to band together in the month of March, collect non-perishable items, and help feed America. To date, this movement has donated over 106,000 pounds of non-perishable goods to local charities. Corporations Feeding America is being powered by AZCO Corp. After six years, founder Richard Bahr,...

Read More »
Pouch Dispenser features motor-fed precision cutting.
Food Processing & Preparation

Pouch Dispenser features motor-fed precision cutting.

Designed to cut and dispense variety of materials of varying thicknesses, fed from continuous web, SUR-PAK™ VIP-100 is suited for desiccant, oxygen absorbers, food packs, and promotional items. Design includes timing screw, ensuring controlled and accurate insertion into bottles at speed of 200 cycles/min. Requiring 110 Vac, 50/60 Hz, single phase, and 30–90 psi supply of compressed air,...

Read More »
AZCO Corp. Designs Sheeter with Automated Stacking System
Packaging Products & Equipment

AZCO Corp. Designs Sheeter with Automated Stacking System

Fairfield, NJ – AZCO Corp. has designed a custom sheeter system which is used to unwind, cut and stack a 29 wide roll of .003" thick aluminum material. The process begins with the roll of material loaded onto a motorized single shaft unwind.-  The unwind is equipped with a dancer attachment and idler roller to maintain web tension and alignment.  All rollers are urethane coated for uniform...

Read More »
Tubing Cutter makes accurate cuts at 45
Food Processing & Preparation

Tubing Cutter makes accurate cuts at 45

Offering accuracy of ±0.1 in. at 3.9 in. lengths, Tubing Cutter can cut heavy and thin plastic or rubber non-wire reinforced tubing up to 1 in. diameter. Tubing is indexed by servo motor with dual drive tractor belt system. Replaceable knife cartridges can be set up for different angled cuts as well as standard perpendicular cuts.- Operated via touchscreen, cutter is equipped with pneumatically...

Read More »
Modular Punch Assemblies feature one-piece design.
Machinery & Machining Tools

Modular Punch Assemblies feature one-piece design.

Featuring punch-and-die design to make custom-shaped cut-outs, Modular Punch Assemblies can punch holes in flexible materials such as films, foils, paper, nonwovens, hose, tubing, tape, foam, rubber, mesh, laminates, and medical devices. Units are also capable of creating virtually invisible micro punches. Available in pneumatic or electric configurations, punch units use hardened-steel tooling...

Read More »
Food Processing & Preparation

Rotary Shear Cutter delivers hundreds of cuts per minute.

Featuring bolt-in, modular design, Rotary Shear Cutter is equipped with through-hardened D-2 tool steel blades and precision bearings that are designed to take high load forces. Rotary knife assemblies can be incorporated into new machines or inserted into existing process. In addition to- output shaft made to customer requirements, cutter includes mounting holes to facilitate installation.

Read More »
Test Strip Cutter reduces waste and tooling expense.
Food Processing & Preparation

Test Strip Cutter reduces waste and tooling expense.

Using- rotary shear cut blades driven by digital motors, touchscreen-operated AZCO test strip cutter allows original format of diagnostic test sheets to be cut into individual strips. First station cuts diagnostic sheet into 10 individual cards, and second station cuts cards into 50, 6 mm strips. After diagnostic sheet/card is fed into unit, it automatically cuts to size and feeds strips...

Read More »

All Topics