Ashcroft, Inc.
Stratford, CT 06614
New Dual Sensor Thermometer Requires Single Process Connection Point
Available in stem length from 90 mm. to 2000 mm. and comes in 80, 100, 130, or 150 mm. diameter dial. Features multi-capable design that saves both installation time and cost of purchasing two separate instruments. Includes type K thermocouple to signal a remote readout, data acquisition device or control system.
Read More »
New V02 Monoflange Valve Assembly Provides Block and Bleed Capability for Process or Instrumentation Control
Compatible with ½ to 3 in. standard ASME raised face and ring joint flange connections that can easily mates to existing common flange couplings. Offers maximum pressure rating of 6092 psi at 428°F (420 bar at 220°C) that is Ideal for most severe applications. 316L stainless steel wetted parts along with optional alternate materials allow to stand-up to a wide variety of pressure media.
Read More »
New E2 Sanitary Pressure Transducer Designed with Tri-Clamp Connection
Offers accuracies up to ±0.25% of span at reference temperature and pressure ranges up to 1000 psi. 316L stainless steel housing guards against moisture penetration during wash-down. Eliminates the need for access holes or removing the connector to access the offset/span potentiometers.
Read More »
New TC Tank Level Gauge with Analog Dial Available in 160 mm Size
Provides liquid level measurement for any shape vented storage tank or vessel. 316 SS fittings and mounting configurations allow for either external or internal installation. Indication is separated by an integral capillary line, up to 90 feet facilitating the remote mounting of the seal housing.
Read More »
New Isolation Assemblies Equipped with Diaphragm Seals and Isolation Rings
Ideal for transmitters measuring aggressive media in water and wastewater treatment applications. Construction includes compatible isolation device, low volume fittings to control temperature error, liquid fill and a final calibration check of the complete system.
Read More »
New Capability Measures Higher Pressures
For high pressure installations, Ashcroft has expanded the range capability of the T6500 pressure gauge to 60,000 psi. This gauge is equipped with a solid front 304 stainless steel case and meets the ingress requirements of IP66 and NEMA 4X. Available in either a 100mm or 160mm diameter, the T6500 is ideally suited for water jetting and water blasting applications. For more information, please...
Read More »
New 1259 Pressure Gauge with Patented PLUS! Performance Option
PLUS! Performance feature dampens pointer flutter without the need for traditional liquid fill. Provides stable readings in process applications despite high vibration and pulsation.
Read More »
New 1140 Pressure Gauge Features Sturdy Glass Filled Nylon Front Case
Front case allows window to be removed and cleaned. Additional hardware is not required for either direct or panel mounting. Ideal for applications that do not require all stainless steel protection.
Read More »
Ashcroft Introduces KD41 Pressure Transducer with IP67 Sealed Housing
Offered in CANopen® 2.0A, CANopen® 2.0B and CAN SAE J1939 variants in ranges up to 20,000 psi. Meets CD and EC standards and comes with optional IP69 ingress protection. Features stainless steel housing with CANbus protocol and Ashcroft® sensor.
Read More »
Ashcroft Launches Pressure Gauges with Duravis Yellow-Green Dials for Enhanced Readability in Low Light
Ashcroft 1009, 1209, 1259, 1279, 1377, 1379 and T5500/T6500 pressure gauges are made from engineered 3M retroreflective sheeting. In diminished natural light, the dials enable operators to locate and read the gauge with flashlights.
Read More »
New Dual Sensor Thermometer Requires Single Process Connection Point
Available in stem length from 90 mm. to 2000 mm. and comes in 80, 100, 130, or 150 mm. diameter dial. Features multi-capable design that saves both installation time and cost of purchasing two separate instruments. Includes type K thermocouple to signal a remote readout, data acquisition device or control system.
Read More »
New V02 Monoflange Valve Assembly Provides Block and Bleed Capability for Process or Instrumentation Control
Compatible with ½ to 3 in. standard ASME raised face and ring joint flange connections that can easily mates to existing common flange couplings. Offers maximum pressure rating of 6092 psi at 428°F (420 bar at 220°C) that is Ideal for most severe applications. 316L stainless steel wetted parts along with optional alternate materials allow to stand-up to a wide variety of pressure media.
Read More »
New E2 Sanitary Pressure Transducer Designed with Tri-Clamp Connection
Offers accuracies up to ±0.25% of span at reference temperature and pressure ranges up to 1000 psi. 316L stainless steel housing guards against moisture penetration during wash-down. Eliminates the need for access holes or removing the connector to access the offset/span potentiometers.
Read More »
New TC Tank Level Gauge with Analog Dial Available in 160 mm Size
Provides liquid level measurement for any shape vented storage tank or vessel. 316 SS fittings and mounting configurations allow for either external or internal installation. Indication is separated by an integral capillary line, up to 90 feet facilitating the remote mounting of the seal housing.
Read More »
New Isolation Assemblies Equipped with Diaphragm Seals and Isolation Rings
Ideal for transmitters measuring aggressive media in water and wastewater treatment applications. Construction includes compatible isolation device, low volume fittings to control temperature error, liquid fill and a final calibration check of the complete system.
Read More »
New Capability Measures Higher Pressures
For high pressure installations, Ashcroft has expanded the range capability of the T6500 pressure gauge to 60,000 psi. This gauge is equipped with a solid front 304 stainless steel case and meets the ingress requirements of IP66 and NEMA 4X. Available in either a 100mm or 160mm diameter, the T6500 is ideally suited for water jetting and water blasting applications. For more information, please...
Read More »
New 1259 Pressure Gauge with Patented PLUS! Performance Option
PLUS! Performance feature dampens pointer flutter without the need for traditional liquid fill. Provides stable readings in process applications despite high vibration and pulsation.
Read More »
New 1140 Pressure Gauge Features Sturdy Glass Filled Nylon Front Case
Front case allows window to be removed and cleaned. Additional hardware is not required for either direct or panel mounting. Ideal for applications that do not require all stainless steel protection.
Read More »
Ashcroft Introduces KD41 Pressure Transducer with IP67 Sealed Housing
Offered in CANopen® 2.0A, CANopen® 2.0B and CAN SAE J1939 variants in ranges up to 20,000 psi. Meets CD and EC standards and comes with optional IP69 ingress protection. Features stainless steel housing with CANbus protocol and Ashcroft® sensor.
Read More »
Ashcroft Launches Pressure Gauges with Duravis Yellow-Green Dials for Enhanced Readability in Low Light
Ashcroft 1009, 1209, 1259, 1279, 1377, 1379 and T5500/T6500 pressure gauges are made from engineered 3M retroreflective sheeting. In diminished natural light, the dials enable operators to locate and read the gauge with flashlights.
Read More »
