Applied Motion Products, Inc.

Watsonville, CA 95076

MDX Integrated Servo Motors from Applied Motion Products are Now UL Recognized
Watsonville, CA… July 10, 2020… Applied Motion Products increases the acceptance of MDX Integrated Servo Motors into industrial motion control applications with UL Recognition on all models. This certification assures users in the United States and Canada that these motors meet high quality standards for electrical safety. The integrated motors were evaluated according to ANSI/UL standards...
Read More »
New Absolute Encoders with Ability to Track More Than 65,000 Revolutions of Motor Shaft
TruCount™ encoders make use of a energy harvesting technique to enable battery-less functionality. Reduces downtime by shortening machine power up sequences and eliminates the need for homing runs after power cycles and emergency stops. Do not require batteries or external power to track position when the motor is powered off.
Read More »
New SSDC Series StepSERVO Drives Feature Dual-Port Communications
Offer 8 digital inputs, 4 digital outputs, 2 analog inputs, encoder outputs and secondary encoder inputs. Comes with a range of communication options including EtherNet/IP, Modbus and SCL over Ethernet or RS-485. Available with two power levels SSDC03 and SSDC10 drives that provide 3.0 A/phase peak-of-sine to the motor and 10.0 A/phase peak-of sine to the motor respectively.
Read More »
New StepSERVO Closed Loop Integrated Motors are IP65 Rated
Features closed loop servo control of position, velocity and torque resulting in higher acceleration rates and faster machine cycles in food & beverage applications. Executes stored programs created with Q Programming language enables users to apply complicated logic and motion sequences. Comes with high-torque step motor with on-board drive, encoder, controller and closed-loop servo software.
Read More »
New ODVA Conformant Drives and Motors Perform Positioning, Velocity and Motion Control Tasks
SV200 Digital Servo Drives provides advanced performance and auto-tuning with multiple control options. ST Stepper Drives includes stall detection, stall prevention, microstep emulation and anti-resonance. StepServo™ Integrated Motors features high-resolution incremental encoders and closed-loop servo firmware.
Read More »
New NEMA 24 Frame Integrated Motors from Applied Motion Products are IP65 Rated
Comes in SWM24IP-3DE and TXM24IP-1DG variants with Dual-Port Communication. Each motor features mounting flange and built-in encoder. SWM24IP-3DE performs stall detection and stall prevention while TXM24IP-1DG utilizes StepSERVO™ Closed-Loop Stepper technology.
Read More »
Applied Motion Products Launches Frame Integrated Motors Which is Available in 60mm Size with Larger Shaft
Available in two models SWW24IP-3DE Integrated stepper motor and TXM24IP-IDG StepSERVO. Features include I/O, configuration, polling, math, register manipulation, and Q programming and 130 registers for controlling motion. Provides greater acceleration, increased efficiency, increased accuracy with reduced motor heating and noise.
Read More »
New Step Motors Offer High Torque up to 22 oz-in at Low Speed
Operate with high step accuracy and resolution as well as low vibration and noise. Compact motors available in NEMA sizes 8, 11 or 14 for medical devices, 3D printers and textile equipment applications. 1.8◦ step angle and RoHS compliant units are available in single and double-shaft versions.
Read More »
Applied Motion Presents Tools for Stepper and Servo Motors That Use Serial Command Language
Includes application note and sample code that guide Python programmers to send high-level motion commands to one or more stepper or servo motors. SCL provides commands to motion control that includes homing, absolute, relative and jog move types over Ethernet TCP or UDP, RS-485, and RS-232 connections. Establishes communications between motion control axes and Python application.
Read More »
Applied Motion Products' Launches MDX Integrated Servo Motors with CANopen, RS-485 and Modbus Command Interfaces
IP65 and IP20 rated motors have M12 connectors and pluggable connectors respectively. Offers enhanced solution to brushed DC and AC induction motors in serving as the main drive motors for forward/reverse motion. Provides design modularity and simplicity for a wide range of applications including automated guided vehicles and autonomous mobile robots.
Read More »Applied Motion Products Breaks Ground on New Corporate Headquarters in Morgan Hill, CA
Morgan Hill, CA, August 6, 2020: Applied Motion Products , the motion control and automation solutions provider located in central California, broke ground for its new corporate headquarters on August 6, marking another important milestone in the construction phase of the new building. After delays related to the COVID-19 pandemic, the event took place at the site of the new building in the...
Read More »
MDX Integrated Servo Motors from Applied Motion Products are Now UL Recognized
Watsonville, CA… July 10, 2020… Applied Motion Products increases the acceptance of MDX Integrated Servo Motors into industrial motion control applications with UL Recognition on all models. This certification assures users in the United States and Canada that these motors meet high quality standards for electrical safety. The integrated motors were evaluated according to ANSI/UL standards...
Read More »
New Absolute Encoders with Ability to Track More Than 65,000 Revolutions of Motor Shaft
TruCount™ encoders make use of a energy harvesting technique to enable battery-less functionality. Reduces downtime by shortening machine power up sequences and eliminates the need for homing runs after power cycles and emergency stops. Do not require batteries or external power to track position when the motor is powered off.
Read More »
New SSDC Series StepSERVO Drives Feature Dual-Port Communications
Offer 8 digital inputs, 4 digital outputs, 2 analog inputs, encoder outputs and secondary encoder inputs. Comes with a range of communication options including EtherNet/IP, Modbus and SCL over Ethernet or RS-485. Available with two power levels SSDC03 and SSDC10 drives that provide 3.0 A/phase peak-of-sine to the motor and 10.0 A/phase peak-of sine to the motor respectively.
Read More »
New StepSERVO Closed Loop Integrated Motors are IP65 Rated
Features closed loop servo control of position, velocity and torque resulting in higher acceleration rates and faster machine cycles in food & beverage applications. Executes stored programs created with Q Programming language enables users to apply complicated logic and motion sequences. Comes with high-torque step motor with on-board drive, encoder, controller and closed-loop servo software.
Read More »
New ODVA Conformant Drives and Motors Perform Positioning, Velocity and Motion Control Tasks
SV200 Digital Servo Drives provides advanced performance and auto-tuning with multiple control options. ST Stepper Drives includes stall detection, stall prevention, microstep emulation and anti-resonance. StepServo™ Integrated Motors features high-resolution incremental encoders and closed-loop servo firmware.
Read More »
New NEMA 24 Frame Integrated Motors from Applied Motion Products are IP65 Rated
Comes in SWM24IP-3DE and TXM24IP-1DG variants with Dual-Port Communication. Each motor features mounting flange and built-in encoder. SWM24IP-3DE performs stall detection and stall prevention while TXM24IP-1DG utilizes StepSERVO™ Closed-Loop Stepper technology.
Read More »Applied Motion Products Buys Land in Silicon Valley to Construct New Corporate Headquarters for U.S. Operations
Watsonville, CA…July 9, 2019… Motion control and automation solutions provider Applied Motion Products recently purchased land to build its new corporate headquarters in Morgan Hill, CA, located in Santa Clara County at the southern tip of Silicon Valley. The new headquarters will consolidate all U.S. operations (now conducted in two separate buildings located in Watsonville, CA) including...
Read More »
Applied Motion Products Launches Frame Integrated Motors Which is Available in 60mm Size with Larger Shaft
Available in two models SWW24IP-3DE Integrated stepper motor and TXM24IP-IDG StepSERVO. Features include I/O, configuration, polling, math, register manipulation, and Q programming and 130 registers for controlling motion. Provides greater acceleration, increased efficiency, increased accuracy with reduced motor heating and noise.
Read More »
New Step Motors Offer High Torque up to 22 oz-in at Low Speed
Operate with high step accuracy and resolution as well as low vibration and noise. Compact motors available in NEMA sizes 8, 11 or 14 for medical devices, 3D printers and textile equipment applications. 1.8◦ step angle and RoHS compliant units are available in single and double-shaft versions.
Read More »