Anver Corp.
Hudson, MA 01749
Robotic Press Suction Cups safely handle thin sheets.
Suitable for use with high-speed, robotic, pick-and-place sheet metal handling equipment, slip-free Press Automation Cups (Panel Cups) series securely grips dry and oilyÃ- metal, plastic, or compositeÃ- materials. Silicon-free cups, molded from ANVER Nomathane™ 50 and 60, disperse existing surface oil on stamped panels, and exhibit non-marking as well as anti-slip properties. Sealing...
Read More »
Pneumatic Vacuum Lifter prevents damage to cylindrical loads.
Featuring rectangular suction pads that adjust to curvature of top surface, VPFL Air-Powered Vacuum Lifter lets one person handle cylindrical loads of up to 2,000 lb without blocking, chains, and slings. Full lengthwise support prevents bending and sagging, while 2 alignment guides facilitate attachment. Ergonomic, below-the-hook lifter also offers adjustable handlebar to accommodate loads of...
Read More »
Vacuum Lifter features redundant vacuum systems.
Featuring all-welded steel construction, fail-safe Dual Circuit Vacuum Lifter is powered by 2 independent vacuum system circuits, including check valves for each, 2 separate reservoirs, and filters. Unit is custom built in capacities to 60,000 lb and features hand-replaceable quick-change ring vacuum sealing cups. Powered by either compressed air or electric vacuum pumps, lifter is designed for...
Read More »
Mill-Duty Vacuum Lifter handles ferrous and non-ferrous metals.
Featuring all-welded steel frame and beam with 4-8 silicone sealing ring vacuum pads, E-Series has 16,000 capacity for handling ferrous and non-ferrous plates up to 8 x 12 ft. Below-the-hook vacuum powered lifter is designed for optimum safety, with control pendant that requires two-hand operation and if there is loss of power, it has self-contained vacuum reservoir, check valves, and leakage...
Read More »
Vacuum Lifter handles small off-center loads.
Custom-designed to match user requirements, VM-Series below-the-hook lifter features offset construction and is counterbalanced for use with off-center loads. Unit grips load from side and rotates full 360Ã-
Read More »
Hand Vacuum Suction Cups eliminates danger of handling edges.
Available in one- and two-finger styles and designed for horizontal handling, Hand Vacuum Suction Cups eliminate danger of holding materials by the edges, which can cause hand injury and damage. Vacuum cups feature all rubber construction and can lift non-porous, light sheet materials by being pressed onto surface, and are released by moving a tab. One-finger style cup measures 2.25 in. OD, while...
Read More »
Vacuum Tilters are powered by compressed air or electric.
Featuring front handlebar equipped with safety attach-and-release lock, Anver ET-AT Series, below-the-hook vacuum tilters are designed for handling horizontal to vertical sheet or plate from 5 x 10 ft to 8 x 10 ft. Available with 4 or 8 vacuum pads, these modular units are offered in 500-, 1,000-, or 2,000 lb capacities. Other features included are pump filter, check valve, battery powered...
Read More »
Vacuum Pads handle rough and uneven surfaces.
FP Foam Seal Rectangular Vacuum Pads handle surfaces such as concrete, stone, tread-plate, wood, and various composites during fabrication and on-site installation applications. They feature steel construction with welded steel lip, which secures neoprene rubber slip-on edge, and soft foam sealing edge. Designed for use with VPE1 Series electric vacuum generator, pads can be changed in field...
Read More »
Fork Lift Vacuum Attachment secures loads from top.
Designed to let one operator lift sensitive loads from top without hooks, grabs, or slings, Fork Lift Vacuum Attachment slides onto standard 26 in. forks and incorporates 16 spring-assisted vacuum pads, depending upon configuration. Attachment has all-welded steel frame and offers capacities to 5,000 lb. Powered by 12 V gel battery, unit includes remote pendant control and is suited for lifting...
Read More »
Vacuum Cups, Suspensions come in fully integrated packages.
Supplied as completely packaged assemblies, vacuum suction cups and suspensions let users create custom lifters and jigs using off-the-shelf components. Packages help ensure proper matching of components to application requirements. Available in flat and single- or multiple-bellows styles, Anver Vacuum Cups come in range of shapes, sizes, and materials. Suspensions can have spring-loaded tops and...
Read More »
Robotic Press Suction Cups safely handle thin sheets.
Suitable for use with high-speed, robotic, pick-and-place sheet metal handling equipment, slip-free Press Automation Cups (Panel Cups) series securely grips dry and oilyÃ- metal, plastic, or compositeÃ- materials. Silicon-free cups, molded from ANVER Nomathane™ 50 and 60, disperse existing surface oil on stamped panels, and exhibit non-marking as well as anti-slip properties. Sealing...
Read More »ANVER Corp. Takes Steps Towards Going Green
User's Guides and supplemental information now provided on USB flash drives Hudson, MA - In efforts to reduce waste and save natural resources, ANVER Corporation has announced its enacting some basic, yet impactful, green initiatives. By eliminating the use of traditional paper User's Guides, ANVER customers will now receive USB flash drives with their vacuum lifter purchases. Each flash drive...
Read More »
Pneumatic Vacuum Lifter prevents damage to cylindrical loads.
Featuring rectangular suction pads that adjust to curvature of top surface, VPFL Air-Powered Vacuum Lifter lets one person handle cylindrical loads of up to 2,000 lb without blocking, chains, and slings. Full lengthwise support prevents bending and sagging, while 2 alignment guides facilitate attachment. Ergonomic, below-the-hook lifter also offers adjustable handlebar to accommodate loads of...
Read More »
Vacuum Lifter features redundant vacuum systems.
Featuring all-welded steel construction, fail-safe Dual Circuit Vacuum Lifter is powered by 2 independent vacuum system circuits, including check valves for each, 2 separate reservoirs, and filters. Unit is custom built in capacities to 60,000 lb and features hand-replaceable quick-change ring vacuum sealing cups. Powered by either compressed air or electric vacuum pumps, lifter is designed for...
Read More »
Mill-Duty Vacuum Lifter handles ferrous and non-ferrous metals.
Featuring all-welded steel frame and beam with 4-8 silicone sealing ring vacuum pads, E-Series has 16,000 capacity for handling ferrous and non-ferrous plates up to 8 x 12 ft. Below-the-hook vacuum powered lifter is designed for optimum safety, with control pendant that requires two-hand operation and if there is loss of power, it has self-contained vacuum reservoir, check valves, and leakage...
Read More »
Vacuum Lifter handles small off-center loads.
Custom-designed to match user requirements, VM-Series below-the-hook lifter features offset construction and is counterbalanced for use with off-center loads. Unit grips load from side and rotates full 360Ã-
Read More »
Hand Vacuum Suction Cups eliminates danger of handling edges.
Available in one- and two-finger styles and designed for horizontal handling, Hand Vacuum Suction Cups eliminate danger of holding materials by the edges, which can cause hand injury and damage. Vacuum cups feature all rubber construction and can lift non-porous, light sheet materials by being pressed onto surface, and are released by moving a tab. One-finger style cup measures 2.25 in. OD, while...
Read More »
Vacuum Tilters are powered by compressed air or electric.
Featuring front handlebar equipped with safety attach-and-release lock, Anver ET-AT Series, below-the-hook vacuum tilters are designed for handling horizontal to vertical sheet or plate from 5 x 10 ft to 8 x 10 ft. Available with 4 or 8 vacuum pads, these modular units are offered in 500-, 1,000-, or 2,000 lb capacities. Other features included are pump filter, check valve, battery powered...
Read More »
Vacuum Pads handle rough and uneven surfaces.
FP Foam Seal Rectangular Vacuum Pads handle surfaces such as concrete, stone, tread-plate, wood, and various composites during fabrication and on-site installation applications. They feature steel construction with welded steel lip, which secures neoprene rubber slip-on edge, and soft foam sealing edge. Designed for use with VPE1 Series electric vacuum generator, pads can be changed in field...
Read More »
Fork Lift Vacuum Attachment secures loads from top.
Designed to let one operator lift sensitive loads from top without hooks, grabs, or slings, Fork Lift Vacuum Attachment slides onto standard 26 in. forks and incorporates 16 spring-assisted vacuum pads, depending upon configuration. Attachment has all-welded steel frame and offers capacities to 5,000 lb. Powered by 12 V gel battery, unit includes remote pendant control and is suited for lifting...
Read More »