Anthro Corporation
Tualatin, OR 97062
Share:
Electric Lift Table raises/lowers to ergonomic heights.
Elevate(TM) Electric Lift Table raises and lowers via keypad control and is offered in 2 styles: single-surface, where desktop moves up and down, or dual-surface, where back and front surfaces move up and down independently. Each style comes in 48 or 60 in. width and can be placed at heights from 29-42 in. from ground. Features include control box, cable trough, 4 in. rhombus locking casters, 250...
Read More »
Cart maneuvers through laboratory aisles and hospitals.
Built with metal frame that holds up to 100 evenly-distributed pounds, Trolley Lite features handle, slotted bottom metal shelf, and 4 in. casters. Light gray top shelf is laminated, 1 in., industrial-grade particle board and measures 18Ã-½ x 19Ã-½ in. Cables from equipment can be routed around hooks and guided through trough between back legs. Accessories include additional top shelf and...
Read More »
All-Metal Cart transports instruments.
Able to transport instruments down aisles and around corners, Instrument Cart comes with 2 shelves on metal frame with 3 in. hard rubber casters and handle. Legs (2) feature 1Ã-¼ in. wide cable channels to conceal and protect cables. Shelves can be installed in cart at any height in 1 in. increments. Slotted lower shelves are ready for optional Strap and Buckle Set to secure equipment. Total...
Read More »Security Cart hides equipment safely out of sight.
Security Cart is fully enclosed on top, bottom, sides, and front with vented metal door featuring 2-point lock. Enclosure measures 27.5 in. high, 22 in. deep, and is offered in 24 in. wide and 30 in. wide versions. It comes standard with 2 vented side panels, metal rear panel, laminated top and bottom panels, and four 4 in. plate-mount casters. Handle, shelves, and drawers can be added. Cart is...
Read More »
Rack System accommodates various brands of equipment.
Offered in 9 model sizes, Rack System is available in 12, 24, and 36 Unit sizes with 24, 30, or 36 in. depths. Floating frame and modular rack-mount angles create hybrid rack configuration by holding equipment of various depths and mounting standards. Equipment can be rack-mounted with screws in tapped rails attached to front and back of rack. Sides, top, and bottom are not part of Rack...
Read More »
Enclosed Cart measures 24 x 28 in.
The eCart comes with 2 side panels, vented metal back panel, laminated top and bottom panels with ventilated metal corners, four 5 in. casters, and 8 vinyl corner guards. Vents create natural convection of releasing hot air through top, and inviting cool air from bottom. Cart can be customized by adding inboard shelves and drawers or 15U rack rails for rack equipment. Inside mounting holes are...
Read More »Hanging Rack attaches to any shelf.
Hanging Rack accessory screws into bottom of shelf and puts Rack equipment within reach on workstation. Available in 1, 3, and 9 unit sizes, and made of 11 gauge steel, assembly holds up to 100 lb. Height of 1 Unit Rack is 1.75 in., 3 Unit Rack is 5.25 in., and 9 Unit Rack is 18.25 in., all with width of 22 in. Two Hanging Racks can be used to securely hold extra long rack equipment.
Read More »Monitor Arm tilts display up to 200 deg.
LCD Arm lifts flat panel monitors off desktop. It extends 22 in. from where it is mounted and can be adjusted to counterbalance different weights of flat panel monitors ranging from 8-22 lb. With vertical travel range of 16 in. in height, arm adjusts at 3 joints and rotates 360Ã-
Read More »Computer/Instrument Cart supports up to 150 lb.
POC Cart holds laptops, pc-based computers, and instruments. Adjustable-height 20 x 20 in. shelf varies in height from 29.25 to 39.25 in. and is actuated via lever-controlled gas cylinder. Cart, with 25 in. diameter, includes shelf; base; 5 rubber, single-wheel, 4 in. casters; and integrated handle. Built-in cable management alleys along trunk keep wires organized and out of sight. Tilt-shelf...
Read More »
Electric Lift Table raises/lowers to ergonomic heights.
Elevate(TM) Electric Lift Table raises and lowers via keypad control and is offered in 2 styles: single-surface, where desktop moves up and down, or dual-surface, where back and front surfaces move up and down independently. Each style comes in 48 or 60 in. width and can be placed at heights from 29-42 in. from ground. Features include control box, cable trough, 4 in. rhombus locking casters, 250...
Read More »
Cart maneuvers through laboratory aisles and hospitals.
Built with metal frame that holds up to 100 evenly-distributed pounds, Trolley Lite features handle, slotted bottom metal shelf, and 4 in. casters. Light gray top shelf is laminated, 1 in., industrial-grade particle board and measures 18Ã-½ x 19Ã-½ in. Cables from equipment can be routed around hooks and guided through trough between back legs. Accessories include additional top shelf and...
Read More »
All-Metal Cart transports instruments.
Able to transport instruments down aisles and around corners, Instrument Cart comes with 2 shelves on metal frame with 3 in. hard rubber casters and handle. Legs (2) feature 1Ã-¼ in. wide cable channels to conceal and protect cables. Shelves can be installed in cart at any height in 1 in. increments. Slotted lower shelves are ready for optional Strap and Buckle Set to secure equipment. Total...
Read More »Security Cart hides equipment safely out of sight.
Security Cart is fully enclosed on top, bottom, sides, and front with vented metal door featuring 2-point lock. Enclosure measures 27.5 in. high, 22 in. deep, and is offered in 24 in. wide and 30 in. wide versions. It comes standard with 2 vented side panels, metal rear panel, laminated top and bottom panels, and four 4 in. plate-mount casters. Handle, shelves, and drawers can be added. Cart is...
Read More »
Rack System accommodates various brands of equipment.
Offered in 9 model sizes, Rack System is available in 12, 24, and 36 Unit sizes with 24, 30, or 36 in. depths. Floating frame and modular rack-mount angles create hybrid rack configuration by holding equipment of various depths and mounting standards. Equipment can be rack-mounted with screws in tapped rails attached to front and back of rack. Sides, top, and bottom are not part of Rack...
Read More »
Enclosed Cart measures 24 x 28 in.
The eCart comes with 2 side panels, vented metal back panel, laminated top and bottom panels with ventilated metal corners, four 5 in. casters, and 8 vinyl corner guards. Vents create natural convection of releasing hot air through top, and inviting cool air from bottom. Cart can be customized by adding inboard shelves and drawers or 15U rack rails for rack equipment. Inside mounting holes are...
Read More »Hanging Rack attaches to any shelf.
Hanging Rack accessory screws into bottom of shelf and puts Rack equipment within reach on workstation. Available in 1, 3, and 9 unit sizes, and made of 11 gauge steel, assembly holds up to 100 lb. Height of 1 Unit Rack is 1.75 in., 3 Unit Rack is 5.25 in., and 9 Unit Rack is 18.25 in., all with width of 22 in. Two Hanging Racks can be used to securely hold extra long rack equipment.
Read More »Monitor Arm tilts display up to 200 deg.
LCD Arm lifts flat panel monitors off desktop. It extends 22 in. from where it is mounted and can be adjusted to counterbalance different weights of flat panel monitors ranging from 8-22 lb. With vertical travel range of 16 in. in height, arm adjusts at 3 joints and rotates 360Ã-
Read More »Computer/Instrument Cart supports up to 150 lb.
POC Cart holds laptops, pc-based computers, and instruments. Adjustable-height 20 x 20 in. shelf varies in height from 29.25 to 39.25 in. and is actuated via lever-controlled gas cylinder. Cart, with 25 in. diameter, includes shelf; base; 5 rubber, single-wheel, 4 in. casters; and integrated handle. Built-in cable management alleys along trunk keep wires organized and out of sight. Tilt-shelf...
Read More »