Amprobe

Test & Measurement

Amprobe Introduces Five New True-RMS Clamp Meters

The AMP-200 Series general electrical and AMP-300 Series motor maintenance clamps offer a complete range of measuring functions EVERETT, Wash. -- Amprobe(®) introduces the AMP-200 Series and AMP-300 Series True-RMS clamps offering a complete range of measuring functions for today's modern electrical and motor maintenance applications. The AMP-200 and AMP-300 meters offer True-RMS for...

Read More »
Battery-Powered Milliohm Meter offers portable operation.
Test & Measurement

Battery-Powered Milliohm Meter offers portable operation.

Offering accurate 4-terminal measurement, portable MO-100 enables users to check windings opens/shorts in motors, generators, and transformers; wire-to-wire connection resistances; heating elements testing; and contact resistance in critical electrical connections. Range maximums vary from 200.0 mW to 2,000 W, with min resolution of 100 Â-µW. Protected against over-temperature and...

Read More »
Rugged Electrical Wiring Tester measures voltage drop under load.
Laboratory and Research Supplies and Equipment

Rugged Electrical Wiring Tester measures voltage drop under load.

Model INSP-3 verifies building wiring compliance to electrical code and shows test data such as voltage drop under load, hot and neutral voltage drop, voltage with load, and ground impedance on large display. Incorrect wiring or voltage drop test failure are indicated by flashing screen. Operating from voltage of 95-140 Vac ±2%, ±2 digits, unit offers user selectable 0, 10, 15, and 20...

Read More »
Swivel Clamp Meter allows easy viewing of measurements.
Test & Measurement

Swivel Clamp Meter allows easy viewing of measurements.

Featuring 180° rotating head, Model ACD-21SW provides unobstructed view of 3Â-½ digital LCD in hard-to-reach places. Unit measures AC current up to 400 ACA, AC/DC voltage up to 600 V, resistance, capacitance, temperature, and continuity with measurement rate of 2 times/sec. Accommodating conductors up to 1.18 in., meter includes auto power off, data hold, and low battery indication....

Read More »
Industrial True RMS Clamp Meter has CAT IV safety rating.
Test & Measurement

Industrial True RMS Clamp Meter has CAT IV safety rating.

With large jaw to accommodate wide diameter wires, Model ACDC-3400 IND suits industrial applications/utilities that require extra level of safety. Featuring True RMS sensing for accuracy, it measures AC current up to 1,000 ACA, voltage up to 750 Vac/1,000 Vdc, frequency, resistance, capacitance, and duty cycle. Unit has overload protection of 1,000 Vdc or 750 Vac rms. Safety CAT IV 600 V, CAT III...

Read More »
Battery Impedance Tester determines condition, remaining life.
Test & Measurement

Battery Impedance Tester determines condition, remaining life.

Without taking batteries off line, BAT-500 simultaneously measures resistance to 40 W with accuracy of ±1% of reading ±10 digits and voltage to 40 V with accuracy of ±0.1% of reading ±6 digits. Comparator function with pass/warning/fail indication accelerates testing of batteries up to 500 Ah. There are 99 memory locations to store results, and RS232 interface enables data...

Read More »
Test & Measurement

Amprobe Introduces Five New True-RMS Clamp Meters

The AMP-200 Series general electrical and AMP-300 Series motor maintenance clamps offer a complete range of measuring functions EVERETT, Wash. -- Amprobe(®) introduces the AMP-200 Series and AMP-300 Series True-RMS clamps offering a complete range of measuring functions for today's modern electrical and motor maintenance applications. The AMP-200 and AMP-300 meters offer True-RMS for...

Read More »
Battery-Powered Milliohm Meter offers portable operation.
Test & Measurement

Battery-Powered Milliohm Meter offers portable operation.

Offering accurate 4-terminal measurement, portable MO-100 enables users to check windings opens/shorts in motors, generators, and transformers; wire-to-wire connection resistances; heating elements testing; and contact resistance in critical electrical connections. Range maximums vary from 200.0 mW to 2,000 W, with min resolution of 100 Â-µW. Protected against over-temperature and...

Read More »
Rugged Electrical Wiring Tester measures voltage drop under load.
Laboratory and Research Supplies and Equipment

Rugged Electrical Wiring Tester measures voltage drop under load.

Model INSP-3 verifies building wiring compliance to electrical code and shows test data such as voltage drop under load, hot and neutral voltage drop, voltage with load, and ground impedance on large display. Incorrect wiring or voltage drop test failure are indicated by flashing screen. Operating from voltage of 95-140 Vac ±2%, ±2 digits, unit offers user selectable 0, 10, 15, and 20...

Read More »
Swivel Clamp Meter allows easy viewing of measurements.
Test & Measurement

Swivel Clamp Meter allows easy viewing of measurements.

Featuring 180° rotating head, Model ACD-21SW provides unobstructed view of 3Â-½ digital LCD in hard-to-reach places. Unit measures AC current up to 400 ACA, AC/DC voltage up to 600 V, resistance, capacitance, temperature, and continuity with measurement rate of 2 times/sec. Accommodating conductors up to 1.18 in., meter includes auto power off, data hold, and low battery indication....

Read More »
Industrial True RMS Clamp Meter has CAT IV safety rating.
Test & Measurement

Industrial True RMS Clamp Meter has CAT IV safety rating.

With large jaw to accommodate wide diameter wires, Model ACDC-3400 IND suits industrial applications/utilities that require extra level of safety. Featuring True RMS sensing for accuracy, it measures AC current up to 1,000 ACA, voltage up to 750 Vac/1,000 Vdc, frequency, resistance, capacitance, and duty cycle. Unit has overload protection of 1,000 Vdc or 750 Vac rms. Safety CAT IV 600 V, CAT III...

Read More »
Battery Impedance Tester determines condition, remaining life.
Test & Measurement

Battery Impedance Tester determines condition, remaining life.

Without taking batteries off line, BAT-500 simultaneously measures resistance to 40 W with accuracy of ±1% of reading ±10 digits and voltage to 40 V with accuracy of ±0.1% of reading ±6 digits. Comparator function with pass/warning/fail indication accelerates testing of batteries up to 500 Ah. There are 99 memory locations to store results, and RS232 interface enables data...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers