Kalenborn Abresist Corporation
Urbana, IN 46990
Epoxy Adhesives target pipeline coatings.
Designed for repairing high pressure pipelines, KALFIX 911 and KALFIX 913 are pressure transfer fillers offering extreme adhesion, even to underwater surfaces. For pipeline coating or cold weather use, KALFIX 563 epoxy and curing agent is able to displace water for permanent bond to all substrates with minimal substrate preparation. KALFIX 206, combining liquid epoxy resin and high temperature...
Read More »Kalenborn Abresist Exhibiting at AEP Bro Forum
Kalenborn Abresist Corporation will be exhibiting at AEP BRO Forum 2016 in Booth No. 118 from August 2nd – 5th at the Greater Columbus Convention Center in Columbus, OH. Kalenborn Abresist will be featuring its wear resistant linings at the forum. The company offers wear and abrasion resistant linings for a variety of hydraulic and pneumatic components and pipes handling abrasive bulk...
Read More »Epoxy Coating suits applications above or below water.
Based on blend of liquid epoxy polymer and aliphatic polyamine curing agents, KALCOAT™ 560 can displace water from wet surfaces to make permanent bond. High build 100% solids epoxy coating is solvent-free and incorporates Kevlar-® microfibers for reinforcement and viscosity management for high application rates. KALCOAT 560 can be used as anti-corrosive coating, repair compound, fairing...
Read More »
Kalpoxy NS Wear Compound
Abresist Kalenborn Corporation offers KALPOXY NS, a non-sagging epoxy bonded wear compound suitable for repairing almost any surface, including piping and pumps. This two component wear compound contains more than 70% fine grain silicon carbide (SiC) particles combined with DuPont Kevlar-® fibers for excellent abrasion resistance, toughness and adhesive properties. KALPOXY NS is easy to use and...
Read More »
Kalmetall-C Manganese Hard Castings
Abresist Kalenborn Corporation offers Kalmetall-C manganese hard castings for a wide range of applications including structural elements subject to wear or as replaceable wear parts. Manganese hard castings are known as impact hardening materials with the core remaining relatively tough. Kalmetall-C, a low carbon cast iron with a high manganese content, offers advantages for hammers, scrapers and...
Read More »
Wear Protection Systems reduce noise and damage.
Used in areas prone to combined abrasion and impact, KERAFLEX systems feature ALRESIST-® high alumina ceramics or KALMETALL-®W hard overlay welding plates vulcanized to steel base. Standard panels come in sizes up to 20 in.-² with welded studs or countersunk bolts. ALRESIST-based KERAFLEX-KRM offers -½ or 1 in. tile thickness, while KERAFLEX-WRM consists of KALMETALL-W hard overlay welded...
Read More »
Compound protects system components and pipes.
Made of hard aggregate material, cement binder, and micro and nano silica, KALCRET features mixing time of 5 min and can be applied overhead. Hard aggregate provides wear protection, while micro and nano silica fill pores between cement portions. Suitable for temperatures up to 2,192-
Read More »Pipe System eliminates vibration problems.
KALFLEX Flexible Wear Protection Pipe System connects structural components that move due to vibration, thermal expansion, or intended movement. KALMETALL hard cast iron segments are used in components to withstand impact wear and sliding abrasion, while ALRESIST alumina oxide ceramic segments with Moh's hardness of 9, are used for components exposed to extreme abrasive wear. Elbows are available...
Read More »
Tungsten Carbide Lining withstands impact and abrasion.
KALMETALL-®-TC utilizes chemically bonded elements of tungsten and carbon. Hard grains of tungsten carbide are combined through sintering process into tiles and shapes. Available in thin small tiles and larger thick pieces, KALMETALL-TC is suited for processing machinery components as well as pipes and elbows for pneumatic and gravity piping systems. It can be used for fan blades handling coal,...
Read More »
Spray System allows horizontal and vertical spraying.
Spray System applies KALCRET-S wear compound to large surfaces to achieve jointless lining. Wear and abrasion resistant KALCRET-S can be used at temperatures up to 2192-
Read More »New Regional Sales Manager for Kalenborn Abresist
James Dunchuck will take over as Regional Sales Manager of Kalenborn Abresist Corporation on January 6th and will have responsibility for the Illinois, Indiana, Ohio and Kentucky sales territory. Located in Urbana, IN, Kalenborn Abresist is a leader in the design and supply of wear solutions for a wide range of industries utilizing various mineral and metallic solutions. James Dunchuck- “In my...
Read More »New Management for Kalenborn Abresist
Kalenborn Abresist Corporation announced on Friday, July 29, 2016, that Craig Frendewey, Senior Vice President, will take full responsibility of its North American operations. These operations include Kalenborn Abresist, Kalenborn Canada and Kalenborn Technologies. Craig Frendewey first joined the company in 2013 as Sales Manager and was later named Sr. VP of Sales and Marketing. He is a graduate...
Read More »
Epoxy Adhesives target pipeline coatings.
Designed for repairing high pressure pipelines, KALFIX 911 and KALFIX 913 are pressure transfer fillers offering extreme adhesion, even to underwater surfaces. For pipeline coating or cold weather use, KALFIX 563 epoxy and curing agent is able to displace water for permanent bond to all substrates with minimal substrate preparation. KALFIX 206, combining liquid epoxy resin and high temperature...
Read More »Kalenborn Abresist Exhibiting at AEP Bro Forum
Kalenborn Abresist Corporation will be exhibiting at AEP BRO Forum 2016 in Booth No. 118 from August 2nd – 5th at the Greater Columbus Convention Center in Columbus, OH. Kalenborn Abresist will be featuring its wear resistant linings at the forum. The company offers wear and abrasion resistant linings for a variety of hydraulic and pneumatic components and pipes handling abrasive bulk...
Read More »New Territory Sales Manager for Kalenborn Abresist
Mark Hudcovic has joined Kalenborn Abresist Corporation as a Territory Sales Manager for California, Arizona, Nevada, New Mexico, Utah, Colorado, Wyoming and parts of South Dakota. Hudcovic has over 20 years of industrial sales experience, including mining and power plants. He earned an associate’s degree from Great Basin College. Kalenborn Abresist is a leader in the design and supply of wear...
Read More »Accetta to Retire after over 32 Years with Kalenborn Abresist
Joe Accetta, President of Kalenborn Abresist Corporation, has announced that he will be retiring in May 2016. Mr. Accetta, a 1973 graduate of Northwestern University, was originally employed as Vice President of Sales in 1983 and was named President in 1990. He has served in that capacity for 26 years. For 10 years prior to 1983, Mr. Accetta was involved in the Sales and Abresist Product...
Read More »Frendewey Named Sr VP Sales and Marketing for Kalenborn Abresist
Kalenborn Abresist Corporation has named Craig Frendewey as Sr. VP Sales and Marketing. He is a graduate of Northern Michigan University and has over 30 years of experience in industrial distribution and specialty contracting within the power generation, mining, pulp and paper and oil and gas markets. Frendewey joined Kalenborn Abresist in 2013 as Sales Manager. Kalenborn Abresist is a leader in...
Read More »Scott Dietrich Named Production Manager for Both of Kalenborn Abresist's Manufacturing Plants
Scott Dietrich has recently been named Production Manager for both Kalenborn Abresist Corporation in Urbana, IN and its subsidiary plant, Kalenborn Technologies, in Soddy-Daisy, TN. Dietrich recently celebrated his 25th year with Kalenborn Abresist. Kalenborn Abresist is a leader in the design and supply of wear solutions for a wide range of industries utilizing various mineral and metallic...
Read More »Daniel Holthaus Joins Kalenborn Abresist as Field Sales Manager
Kalenborn Abresist Corporation has named Daniel Holthaus as Field Sales Manager. Holthaus, and the rest of the field service team at Kalenborn Abresist, provide customer support and on-site field service for abrasion resistant linings, corrosion control coatings, steel fabrication services and pipe installation. Holthaus comes to Kalenborn from the Spray Foam Insulation and Coatings side of the...
Read More »Mark Jones Named Supply Chain Manager for Kalenborn Abresist
Kalenborn Abresist Corporation recently named Mark Jones as Supply Chain Manager. Jones will be responsible for ordering all materials, locating any new suppliers and all purchasing activities, tracking and product shipping. Jones recently celebrated his 35th year with Kalenborn Abresist. Kalenborn Abresist is a leader in the design and supply of wear solutions for a wide range of industries...
Read More »