Aalborg Instruments & Controls, Inc.

Aalborg's New DPM Gas Flow Meter Comes with User-Defined Mixture Functionality
Test & Measurement

Aalborg's New DPM Gas Flow Meter Comes with User-Defined Mixture Functionality

Aalborg’s DPM Gas Flow Meter is used for measuring mass flow rates, pressure and temperature of clean, non-corrosive process gases. Unit features flow accuracy of ±0.5% RD+0.2% FS at calibration and a 200:1 turndown ratio. Meter comes with two programmable mass flow rate totalizers and OLED graphic display with joystick control. DPM provides RS-232 and RS-485 digital communication interfaces...

Read More »
Test & Measurement

PTFE/PFA Model L Rotameters feature safety shield.

Constructed using rigid frames and inert wetted parts, PTFE/PFA Model L Rotameter is suitable for measuring low to medium range ultra-pure or corrosive solutions. Enabling direct reading Metric/English system scale for liquids with specific gravity of 1.0, unit features virgin PTFE side panels and back plates. Designed with polypropylene fabricated upper and lower end fittings, device is easily...

Read More »
Non-Invasive Optical Sensor Switches detect high/low flow rates.
Sensors, Monitors & Transducers

Non-Invasive Optical Sensor Switches detect high/low flow rates.

Compatible with Aalborg® P, S, and T rotameters, Optical Sensor Switch Hi-Lo contains 2 sets of self-contained mini-slim photoelectric sensors located on 2 solid carriers. Sensors, consisting of transmitter and receiver, signal cut-off valve, alarm, or other device (not included) when float passes above or below the desired setting to facilitate monitoring of desired flow level....

Read More »
Intelligent Mass Flow Meters and Controllers
Agricultural & Farming Products

Intelligent Mass Flow Meters and Controllers

Aalborg® Instruments' ZFM Mass Flow Meters and Controllers combine intelligence, user convenience, and outstanding flow performance. Aalborg Instruments' ZFM Mass Flow Meters and Controllers are designed for multi-gas/multi-range functionality up to 8 bar (currently 6 gases) and a standard accuracy of ±(0.5% RD + 0.2% FS) based on actual calibration. By connecting the...

Read More »
Intelligent Mass Flow Meters offer multi-gas/-range functionality.
Test & Measurement

Intelligent Mass Flow Meters offer multi-gas/-range functionality.

Supporting 6 gases –Â- N2, Air, O2, Argon, Helium, and CO2 – at up to 8 bar, ZFM offers standard accuracy of ±(0.5% RD + 0.2% FS). Users can, by connecting to RS232/RS485 port of PC or laptop and running ZFM Configuration Utility software, select different gas types and flow ranges (3.5–10 sl/min FS) within minutes and without removing instrument from installation. Other...

Read More »
Peristaltic Pump offers user-selectable flow rates.
Fluid & Gas Flow Equipment

Peristaltic Pump offers user-selectable flow rates.

Occupying 5 x 4 in.Â- footprint, Model TPT Mini is self-priming and offers ON-OFF and CW-CCW reversible settings. Flow rates are user-selectable from 7–28 mL/min by selecting from 4 drives (8, 12, 17, or 25 rpm) and tubing sizes. Design facilitates loading and operation via 2 plastic slide on/off plastic tubing holders that accommodate tubing replacements or tubing size...

Read More »
Panel Mount Acrylic Flowmeters feature interchangeable scales.
Test & Measurement

Panel Mount Acrylic Flowmeters feature interchangeable scales.

Configured for in-line Â-¼ in. female NPT connections, ACRU series is offered with any one interchangeable direct reading scale for air, H2O, Ar, O2, CO2, N, He, or H. Dual scales display flow rates in metric and English units, and optional scales can be developed for diverse flow conditions. Along with 130°F max temperature and 100 psi max pressure, features include ±3%...

Read More »
Aalborg's New DPM Gas Flow Meter Comes with User-Defined Mixture Functionality
Test & Measurement

Aalborg's New DPM Gas Flow Meter Comes with User-Defined Mixture Functionality

Aalborg’s DPM Gas Flow Meter is used for measuring mass flow rates, pressure and temperature of clean, non-corrosive process gases. Unit features flow accuracy of ±0.5% RD+0.2% FS at calibration and a 200:1 turndown ratio. Meter comes with two programmable mass flow rate totalizers and OLED graphic display with joystick control. DPM provides RS-232 and RS-485 digital communication interfaces...

Read More »
Test & Measurement

PTFE/PFA Model L Rotameters feature safety shield.

Constructed using rigid frames and inert wetted parts, PTFE/PFA Model L Rotameter is suitable for measuring low to medium range ultra-pure or corrosive solutions. Enabling direct reading Metric/English system scale for liquids with specific gravity of 1.0, unit features virgin PTFE side panels and back plates. Designed with polypropylene fabricated upper and lower end fittings, device is easily...

Read More »
Non-Invasive Optical Sensor Switches detect high/low flow rates.
Sensors, Monitors & Transducers

Non-Invasive Optical Sensor Switches detect high/low flow rates.

Compatible with Aalborg® P, S, and T rotameters, Optical Sensor Switch Hi-Lo contains 2 sets of self-contained mini-slim photoelectric sensors located on 2 solid carriers. Sensors, consisting of transmitter and receiver, signal cut-off valve, alarm, or other device (not included) when float passes above or below the desired setting to facilitate monitoring of desired flow level....

Read More »
Intelligent Mass Flow Meters and Controllers
Agricultural & Farming Products

Intelligent Mass Flow Meters and Controllers

Aalborg® Instruments' ZFM Mass Flow Meters and Controllers combine intelligence, user convenience, and outstanding flow performance. Aalborg Instruments' ZFM Mass Flow Meters and Controllers are designed for multi-gas/multi-range functionality up to 8 bar (currently 6 gases) and a standard accuracy of ±(0.5% RD + 0.2% FS) based on actual calibration. By connecting the...

Read More »
Intelligent Mass Flow Meters offer multi-gas/-range functionality.
Test & Measurement

Intelligent Mass Flow Meters offer multi-gas/-range functionality.

Supporting 6 gases –Â- N2, Air, O2, Argon, Helium, and CO2 – at up to 8 bar, ZFM offers standard accuracy of ±(0.5% RD + 0.2% FS). Users can, by connecting to RS232/RS485 port of PC or laptop and running ZFM Configuration Utility software, select different gas types and flow ranges (3.5–10 sl/min FS) within minutes and without removing instrument from installation. Other...

Read More »
Peristaltic Pump offers user-selectable flow rates.
Fluid & Gas Flow Equipment

Peristaltic Pump offers user-selectable flow rates.

Occupying 5 x 4 in.Â- footprint, Model TPT Mini is self-priming and offers ON-OFF and CW-CCW reversible settings. Flow rates are user-selectable from 7–28 mL/min by selecting from 4 drives (8, 12, 17, or 25 rpm) and tubing sizes. Design facilitates loading and operation via 2 plastic slide on/off plastic tubing holders that accommodate tubing replacements or tubing size...

Read More »
Panel Mount Acrylic Flowmeters feature interchangeable scales.
Test & Measurement

Panel Mount Acrylic Flowmeters feature interchangeable scales.

Configured for in-line Â-¼ in. female NPT connections, ACRU series is offered with any one interchangeable direct reading scale for air, H2O, Ar, O2, CO2, N, He, or H. Dual scales display flow rates in metric and English units, and optional scales can be developed for diverse flow conditions. Along with 130°F max temperature and 100 psi max pressure, features include ±3%...

Read More »

All Topics