SEVAAN GROUP Pty Ltd
Minto AUS
Share:
New Valvoline EV Performance Fluids Extend Battery Life and Vehicle Components
Heat transfer fluids optimized operational temperature which in turn helps to achieve preferred performance and sustained battery life. Drive system fluids provide anti-corrosion, churning loss reduction and electric motor cooling across four formulas. Brake fluid provides high boiling points (both wet and dry), noise elimination and brake fade reduction.
Read More »New Passive Filters with Wireless Access
Allows users to monitor power quality and control the passive filter using their Android device. Provides all information they need, right at their fingertips. Used with Android versions 5.0 or higher versions.
Read More »
New Tape Measures for Everyday Use
Available in 1-3/16 wide size with extra-large print 12 feet of standout. Matte finish reduces glare and protects blade, ensuring that it holds up through heavy use. 360-degree end hook is designed to grip material from all sides.
Read More »
New 1000Base-T1 Designed for Automotive and Industrial Data Transfer
Single pair ethernet push-pull connector available in the B series and in a watertight version. Operate over a single twisted-pair copper cable supporting an effective data rate of 1 Gbit/sec in each direction simultaneously. Provides two types of insulators 0B.511 and 1B.512 compatible with unshielded twisted pair and shielded twisted pairs.
Read More »
New HVI 2K-F6W Units Measure 254 x 65 x 349 mm, W x H x D
Operates between 700Vdc to 900Vdc input range, 800Vdc nominal input. Equipped with reverse polarity protection, inrush current limiting, output current limiting and short-circuit protection. Built-in redundancy diode allows for parallel and N+1 operation, or back-up battery connection.
Read More »
POREX® Antimicrobial Wound Care Innovation Reduces Healthcare-Associated Infections and Enhances Patient Comfort
Fairburn, GA (April 25, 2018) – Fast and effective wound healing is critical as part of continuing efforts to reduce healthcare-associated infections (HAIs) in clinical settings. To help wound dressing manufacturers improve infection control options for clinicians and provide enhanced patient comfort, Porex Corporation (“POREX®”) has introduced a broad-spectrum antimicrobial foam...
Read More »
POREX® Plastic Filter Housings Extend Life of Ergonomic Vacuum Lifting Systems, Reduce Overall Costs of Workplace Safety
(Fairburn, GA – December 6, 2018) –Porex has engineered plastic filter housings that offer enhanced longevity for ergonomic vacuum lifting systems through active filtration of debris within system vacuum pumps. Debuting in the U.S., the Porex technology helps to prevent box -handling equipment from malfunctioning or wearing out prematurely, making workplace safety more cost-effective for...
Read More »
New 4-Port USB 2.0 Extender Supports Plug-n-Play Specification
USB2-FOSC-4 extends four USB 2.0 devices up to 820 feet using single SC singlemode or multimode fiber optic cable. Ideal for extending self-powered and/or bus-powered USB peripheral devices, such as security cameras, printers, scanners and touch screen monitors. Supports high-speed (480 Mbps), full-speed (12 Mbps) or low-speed (1.5 Mbps) USB devices.
Read More »
New AU100-ER Two-Axis Gimbal Mount Features 360 Degree Continuous Rotation of Each Axis
Handles load up to 20 kg with a clearance of 300 mm x 300 mm about the roll axis of the stage. Pitch and roll axes are driven by bi-directional stepper motors with knobs. Offers travel speed of 12° per each axis, repeatability and positional accuracy of 18 arc seconds.
Read More »
New DockControl Software from Dockmate Used for Remote Control Customizability
Offers off-the-shelf remote control solution to real-world capabilities of vessel and boating style. Gives installer the ability to program the remote control by choosing any combination of engines and thrusters activations. Allows for adjusting the sensitivity and behavior of the Dockmate TWIST joystick, choosing which functions are activated by each joystick direction.
Read More »Matter USA Formed to Service North American Metals Market
Major Italian supplier of intralogistic metal handling systems emerges here Matter SRL Managing Director Giuseppe Rotondi today announces the recent formation of Matter USA Corporation, the company’s new subsidiary for application engineering, sales, and service for this major Italian builder of custom and modular Automated Storage & Retrieval Systems (ASRS) for the metals industry. Matter...
Read More »Nordfab Has Completed Facility Expansion to Provide Faster Shipping
Thomasville, NC, USA – North America’s largest manufacturer of clamp-together ductwork for dust collection has just grown even larger. Construction is complete on an added 54,000 square feet of production and warehouse space, part of Nordfab Ducting’s $5.5 million expansion project, Nordfab Now®, which will allow Nordfab to very quickly ship their most commonly ordered ducting products....
Read More »Concurrent Technologies Corporation Named to U.S. Veterans Magazine's 2023 Top Veteran-Friendly Companies List
Johnstown, PA, November 29, 2023 - Concurrent Technologies Corporation (CTC) is honored to be included in U.S. Veterans Magazine’s (USVM’s) Top Veteran-Friendly Companies for 2023. This is the third year that CTC has made the list. USVM annually evaluates companies; schools; government and law enforcement agencies; and supplier diversity programs for veterans. The goal is to open...
Read More »Kooltronic's Product Testing Laboratory Gets An Upgrade
November 10, 2023 – Kooltronic, Inc. of Pennington, NJ recently completed an upgrade of its product performance and environmental testing laboratory. Kooltronic's previous data acquisition system has been replaced with new supervisory control and data acquisition (SCADA) hardware and software from National Instruments. The system automatically controls, collects, and analyzes data for two...
Read More »The Original With Cult Status - Visitors to HERMLE Open House Almost Back to Pre-Covid Levels
For four days, Maschinenfabrik Berthold HERMLE AG once again opened the doors to its traditional Open House exhibition. Over 1100 companies and 2500 visitors, including 800 international guests, gained a comprehensive understanding of products, automation solutions, digitalization, Industry 4.0 solutions, and HERMLE services, such as service competence, additive manufacturing, and the...
Read More »Umati - to Simplify Your Connectivity
The new interface will provide our customers with a simple means of integration in IT ecosystems. The semantic structure provides the basis for the manufacturer-independent plug-and-play networking of machine tools and could emerge as the machine tool industry standard in the future. umati is a component in HERMLE's portfolio of digital modules; its purpose is to open up additional potential for...
Read More »Fritz The Bull and Ben The Bear
Fritz the Bull” 109 kg, blank 600 kg, and 500 kg of chips (3.5 m3) After the bull Fritz already caused a sensation at the IMTS and numerous visitors had their photo snapped next to the spectacularly presented animal, “Fritz” now has a buddy: the bear Ben . They make a great pair because together they are the symbol of the ups and downs on the stock exchange. This will make them a perfect...
Read More »Sailing Boat Project - MPA Technology and Better Milling
Sailing boat in the workspace of the HERMLEC 400 with attached sail; the copper roof and deck areas have already been milled free, and the cabin windows have been milled into the generatively manufactured hollow space. The aluminum sail was anodized. Additive machining with MPA technology and better milling all rolled into one. To give an impressive and somewhat striking example of a component...
Read More »Machining Production Facility
Facts about the new production facility: Construction period January 2016 - end of 2017 The ceiling height increased from 5 m to approx. 12.50 m Overall height approx. 18.80 m Length approx. 66 m Width approx. 37 m Reconstructed space approx. 30300 m3 Floor space approx. 2330 m2 Plant room approx. 3700 m3 Floor space approx. 700 m2 Flexible manufacturing No “traditional process planning”...
Read More »Mineral Casting in Zimmern o.R., Germany
Facts about the building in Zimmern o.R. Construction period May 2016 - June 2017 Premises 4 hectares on the Inkom industrial estate Overall height approx. 23.50 m Length approx. 102 m Width approx. 32 m + 6 m administrative building Production area approx. 3200 m2 Site Excellent transport links A81/B27 Close to Gosheim, extended catchment area for employees Good infrastructure, favorable...
Read More »