Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Transfer Pumps move wrapped materials without unraveling.
Powered by compressed air, modified material transfer pumps offer instantaneous vacuum flow and high air velocity, allowing material to pass through at high speeds without interference. They are available in anodized aluminum in 16 standard sizes, with internal diameters from 1/8 to 4 in., and vacuum flow rates from 3 SCFM to over 375 SCFM. Pumps are suitable for automating bulk-packaging...
Read More »
Incandescent Light features NEMA 4X/IP65 enclosure.
Streamline(TM) LP3I light is available in 3 mounting options and 5 colors with operating voltages of 12 Vdc, 24 Vdc and 120 Vac. LP3PI has integrated 1/2 in. pipe mount; LP3MI has 1 1/2 in. male-pipe mount; and LP3TI features 2-hole design for surface mounting. LP3I is UL and cUL listed, and available in amber, blue, clear, green and red.
Read More »
Braided Hoses are abrasion resistant.
451TC and 451ST multiple-wire braided hoses offer 1/2 SAE 100R1 minimum bend radius, making installation in tight spaces easy. Sizes range from 1/4 to 1 1/4 in. ID, with constant working pressure of 3000 psi through all sizes. MSHA-accepted Tough Cover of 451TC hose resists hose-to-hose and hose-to-object abrasion, while 451ST, with Super Tough polymeric cover, provides protection in highly...
Read More »Solid-State Switch allows mechanical operation.
Solid state switch can be supplied with maximum of 100 psi or 29.9 in. Hg. Adjustment ranges from 0.5 to 100 psi or 1 to 28 in. Hg. Integrated circuit, actuated by magnet located in operating plunger, produces digital output. Supply voltage is 4.5 to 24 Vdc. Mounting styles are flush mount, panel mount, pipe thread and manifold mount.
Read More »
Horizontal Machining Center produces near-dry chips.
HORKOS HFN-R40H machining center, with Minimum Quantity Lubrication (MQL), consumes just 20 to 50 mL per hour and minimizes concerns associated with cutting fluids when drilling, reaming, boring or tapping. It has 40-taper spindle and 20.8 x 22.0 x 20.8 in. work area travel. Rigid z-axis ram carries 5.5, 7.5, or 15 kW, 12,000 or 15,000 rpm direct-drive spindle. Machine has automatic tool changer...
Read More »
Optical Receivers suit narrowband applications.
Model R406 provides FWHM response over 18-34 GHz range with peak gain of 20dB. Model R407 provides same response over 34-49 GHz range with peak gain of 24dB, and Model R408 covers 39-64 GHz range with peak gain of 20dB. Hermetically sealed modules can be used for hybrid fiber/wireless systems, distribution of RF carriers, as well as optical phased-array radar. Units are available with choice of...
Read More »
Flexible Water Boilers come in sizes from 6 through 25 BHP.
DR Series steam and hot water boilers are available in forced draft gas, oil, or dual fuel (gas/oil) fired models. They utilize tube configuration, which provides water-cooled combustion chamber, and stimulates heat transfer. Removable/replaceable tubes require 24 in. for maintenance access. Largest size DR Series boiler is 33-7/8 in. wide, and will fit through most doors.
Read More »
Grinder includes built-in tramp trap.
TASKMASTER(R) Model TT grinder employs 2 counter-rotating banks of high shear intermeshing cutters that grind and shred solids to fine size. Unit has built-in, oversized, 2-stage tramp trap that lets heavy tramp solids drop out before reaching grinder cutters. Valve is provided for access and removal of collected tramp material. Inlet and outlet flanges are inline for installation and...
Read More »Geometric Modeling Software offers modeling automation.
Version 13.2 of Parasolid CAD/CAM/CAE software enables users to model complex parts and assemblies. Enhancements include support of IntelO Itaniuma 64-bit processor and Windows XP operating system; new patterning, tapering and editing capabilities; advanced blending and surfacing; and improved detail identification and removal to facilitate preparation of simplified models for downstream...
Read More »
CAD/CAM Software provides advanced machining methods.
SURFCAM 2002 enables CNC programming of 2-, 3-, 4, and 5-axis mills, lathes, wire EDM, laser, plasma, and water-jet machines. All machining parameters are associative to geometry. When changes are made to tool or cut information, system automatically regenerates toolpath. Automatic Depth of Cut feature adds machine tool passes to accommodate multiple island heights. File preview technology allows...
Read More »