Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Cigarette Receptacle eliminates litter and safety concerns.
GroundsKeeper(TM) Cigarette Waste Collector is cone-shaped with restricted opening at top, which shields butts from weather that can scatter them. It also discourages depositing ignitable trash with smoldering cigarettes and reduces oxygen flow for quick smothering of lit materials. Inner galvanized canister lifts out for emptying. Collector is made of flame-retardant, injection-molded plastic...
Read More »
Surge Suppressors provide 3-way protection.
CritecÃ-® TDX100 and TDX150 SPD (TVSS) protect equipment from surges and lightning strikes with Transient Discriminating(TM) technology, thermal intimate MOVs, and over-current fusing. Surge ratings of 100 kA and 150 kA 8/20 microsecond meet requirements of IEEE C62.41.2 Scenario II Exposure 3 service entrance protection. Short-circuit rating of 65 kAIC enables them to be directly connected...
Read More »
Linear Sensor Arrays operate at 5 MHz clock.
Model TSL2014, 896 x l Linear Sensor Array measures 4.4 in. in length and is designed for scanning A6 format-size documents. It comes in 10-pin Glass Epoxy Substrate package with Cover Glass. Model TSL210, 640 x 1 Linear Sensor Array measures 3.15 in. in length, and comes in 18-pin Glass Epoxy Substrate package with Cover Glass. TSL210 can be configured in serial mode. TSL2014 can be configured...
Read More »
Control Unit controls and monitors vacuum systems.
Model AVM 5050 electro-pneumatic unit ensures rapid and safe handling of sheet metal. Unit, controlled via either PC or PLC, has built-in energy saving function and maintains vacuum level, should power outages occur. It can be used with smaller compressed air powered vacuum pumps, but can be provided with integrated pump. Capabilities also include control and measuring of blow-off as well as...
Read More »
Tube Cleaning System available in three configurations.
Wils-Away Pneumatic Systems include pneumatic drive unit, flexible shaft and casing, 6 spiral brushes or expanding brush and refill set, and foot pedal for hands-free On/Off and Forward/Reverse operation. Wils-Away 3000 is a 1 1/2 HP portable unit; Wils-Away 4000 4 HP dolly mounted unit is for heat exchangers, condensers, and small diameter pressure vessels; and Wils-Away 4500 4 HP dolly mounted...
Read More »
Dust Collector removes airborne sand.
TubeJetÃ-® dust collector handles 40,000 acfm at air-to-cloth ratios of 5.06:1. Singed polyester filter bags are replaced from top of collector with no-tools-needed process. Collected sand is removed via screw conveyor. TubeJet collector also features walk-in clean air plenum for ease of maintenance.
Read More »
Gantry Cranes lift and move bulky items.
Aluminum and Steel Gantry Cranes are available in capacities from 200 to 6,000 lbs. FHA Series features all-aluminum construction for corrosion resistance. Lightweight I-beam allows height adjustment without hoist or fork truck. Adjustable solid steel gantry cranes have 8 in. diameter, double-locking swivel phenolic casters with roller bearings. They are designed for portability with or without...
Read More »
Die Grinder operates at variable speeds.
Rated at 7.5 A and 900 W, GE900 Plus has 27 lb-in. of torque, making it suitable for grinding internal surfaces in polishing and finishing applications. It is geared to run at lower rpm, increasing number and type of usable accessories for sanding, polishing or buffing, such as flap wheels and non-woven abrasive finishing wheels. Variable speeds from 2,500 to 6,000 rpm allow it to grind and cut...
Read More »
Wire-to-Wire Connectors suit underwater applications.
JWPF Series connectors are designed for moisture and submersion applications. Housing lances allow confirmation of contact lock-in for secure insertion. Plug-to-receptacle interlock housing prevents accidental disconnection. Connectors are offered with 2 to 4 circuits on 2.0 mm pitch, and contacts are rated at 3.0 Amps, 100 V ac/dc. Temperature range is -25 to +85Ã-
Read More »
Wire Feeder provides remote voltage control.
UltrafeedÃ-® 4000 4-roll wire feeder is suitable for semi-automatic welding with solid and flux-cored wires from 0.024 to 1/8 in. Offering 50 to 875 ipm speed control with built-in compensation for changes in line voltage and feed roll load, it adjusts run-in speed and ramp up to match power source start characteristics. Features include no-tools, quick-change feed rolls, rotatable feed head,...
Read More »