Aprima Medical Software, Inc

Computer Hardware & Peripherals

VME64 Processor Board suits military/scientific industries.

Single-slot Model VP 742/10x incorporates MPC7455 PowerPC G4 processor with speed options of 800 MHz or 1 GHz and up to 1 Gbyte SDRAM. With 128-bit AltiVec(TM) technology, system provides 256 Kbytes L2 cache, L1 cache locking, and block address translation registers. Processor connects to MPC107 (Chaparral) PCI bridge to interface to 2 Mbytes of backside L3 cache, PCI bus, SDRAM, and 16 Mbytes of...

Read More »
Embedded Board suits point-of-sale/kiosk applications.
Computer Hardware & Peripherals

Embedded Board suits point-of-sale/kiosk applications.

Model EBC-8300, 5.25 in. embedded board incorporates Intel's 845G Chipset, supporting Intel Pentium 4 processor with speeds of 1.3-3.06 GHz with 256 or 512 KB L2 cache. I/O functions are integrated onto built-in ICH4, and integrated graphics device provides 3D, 2D, and video capabilities. Its 4 USB ports utilize USB 1.1 and 2.0 standard. Available with Ethernet functionality, product also...

Read More »
Control Knobs feature aluminum body and skirt.
Fasteners & Hardware

Control Knobs feature aluminum body and skirt.

Skirted Knurled Control Knobs have anodized finish and decorative light gray, push-fit cover disk made of plastic. Arrow, graduations, and numbers are laser-engraved. Collet version provides easy way to position and lock control knob to shaft. Serrated-end, set-screw version secures control knob tightly to shaft.

Read More »
Height Adjustment Kits retrofit workbenches.
Fasteners & Hardware

Height Adjustment Kits retrofit workbenches.

Retrofit Kits reduce physical injury by enabling workstation users to adjust working surface to correspond with physical requirements. They provide 12 in. height adjustment travel and 700 lb lifting capacity. Each kit includes hydraulic lifting module for each leg and height controller that is manually or electrically actuated. Bolt-on systems install with common tools on 4-leg workbenches,...

Read More »
Level Transmitter employs SMT electronics.
Electrical Equipment & Systems

Level Transmitter employs SMT electronics.

Smart 2 Model L4620 provides 4-20 mA analog signal as well as digital FSK communications signal on same 2-wire signal loop. Based on RF impedance level sensing technology, transmitter provides level control of most non-coating water- or organic-based liquids and light bulk solids. One-piece unit is comprised of electronics and inert sensing probe. Configuration and calibration can be performed...

Read More »
Drill Crown chamfers and drills in one operation.
Mechanical Components and Assemblies

Drill Crown chamfers and drills in one operation.

M-geometry crown, for CrownLoc(TM) drill system, is optimized for hard-to-drill materials and incorporates chamfer module that utilizes 2 inserts, each with 2 cutting edges. Heat generation is minimized via small edge preparation. Sharp cutting edges and conical front rake clearance reduce workpiece work hardening, while cutting geometry reduces residual stress and minimizes burrs at hole exit....

Read More »
Foam Tape bonds automotive trim.
Adhesives & Sealants

Foam Tape bonds automotive trim.

Polyethylene DuofoamÂ-® S5589BA mounting tape is double coated with acrylic, pressure-sensitive adhesive. It offers resistance to dilute acids and alkalies, and meets Ford specifications WSK-M3G184 A1, WSK-M11P49 A, and WSK-M11P51 A. Supplied on blue, siliconized HDPE liner, UV-resistant tape provides clean edge finish and is suitable for bonding door step plates as well as other automotive...

Read More »
Bridge-Type Machining Center suits large-format applications.
Communication Systems & Equipment

Bridge-Type Machining Center suits large-format applications.

Model HSM 800 provides high-speed machining of heavy workpieces up to 2,200 lb, with up to 1.7 g acceleration in 3 dimensions. It features 4-position pallet changer, monoblock construction, concrete polymer base, and Heidenhain TNC 530 control. Liquid-cooled spindle motor with hybrid, ceramic ball bearings, delivers short run-up and braking times. Spindle choices include 30,000 rpm spindle,...

Read More »
Laser Emitter provides 5 different beam shapes.
Display & Presentation Equipment

Laser Emitter provides 5 different beam shapes.

QS18LE Series laser emitters are DC powered laser pointers as well as emitter half of opposed mode sensor pair. As a pointer, QS18LE provides spot, circle, vertical line, horizontal line, and cross for precise product or target location or vision system illumination. When paired with photoelectric receiver, emitter provides small object detection and position control as opposed mode sensor. Unit...

Read More »

All Topics