Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Digital I/O Card expands available I/O in SBCs.
Suited for use with company's SBCs (BL2500) and operator interfaces (OP7200), RN1100 RabbitNet I/O expansion mechanism is based on 3-wire, full duplex technology. Product utilizes off-the-shelf Ethernet cables, transmitting data at rates to 1 Mbit/sec over maximum recommended distance of 33 ft. Mounted on 100 mm DIN rail tray, unit features I/O set consisting of 24 inputs and 16 sink/source...
Read More »
Wet/Dry Vacuum Cleaner has 13 gal capacity.
Bosch 3931 Airsweep maintains maximum airflow and suction power by utilizing U-shaped, electromagnetic Pulseclean(TM) filter cleaning system. Standard filters capture 99.93% of particles 3.0 microns and larger in diameter and are positioned out of direct flow of incoming debris and above reach of dust or liquid already collected in storage tank. Unit has 4 operating modes: vacuuming, Pulseclean,...
Read More »
Digital Torque Wrench has retightening torque technology.
Offered with interchangeable heads, CTB utilizes T-Point Retightening Torque Method, which measures minimum value of retightening torque and works to eliminate risk of human error. Suited for automotive and industrial quality control applications, tool incorporates green lamp/alarm that signals when operation is complete. Unit can also transfer RS232C and infrared torque data.
Read More »
Hydraulic Pump uses less energy without harming performance.
ECO-RICH series combines hydraulic and motor/inverter technology and offers response time of 0.1 sec or less. Offered on Mazak, Mori Seiki, and Enshu machines, product is adaptable to existing machines and requires user to connect unit to 200 V commercial power source in order to operate. Pressure and flow rate can be set on touch panel and are displayed digitally.
Read More »
General Purpose Relay has thin footprint.
Enclosed in UL 94V-0 rated housing that is RT III and wash-tight, 5 mm wide OEG PCN series relay has 1-form-A contact arrangement: single-pole, single throw, NO. Rated for 3 A, it handles switching voltages up to 250 Vac or 30 Vdc resistive. Bifurcated, gold-plated, nickel contacts are capable of switching loads as low as 1 mA @ 5 Vdc. Coil requires 120 mW of coil power, and may be ordered in 5...
Read More »
Linear Actuator withstands washdown applications.
Moisture- and corrosion-resistant, stainless steel, pneumatically driven Series CG5 uses FDA-approved grease and materials. Rod scraper minimizes water infiltration to rod seals, and end caps are screwed on. Available with nitrile-rubber or fluoro-rubber seals, series has 1.0 MPa max operating pressure and is available in 8 bore sizes from 20-100 mm with imperial or metric rod end/ports. Piston...
Read More »Software allows users to import, read, and machine solids.
Solids and Surfaces software system v19.0 lets users import and read in Solids, through IGES, STL, and Step formats and also lets users directly machine them. Additional features include ability to draw basic solid primitives such as cubes, spheres, cones, cylinders and torus. Through Boolean functions, solids can be manipulated and surfaces can be offset to compensate for material shrinkage.
Read More »Hot-Melt Butyl Sealant is suited for edge sealing IG units.
Suited for hand gunning applications, Edge Therm(TM) THM 3000 consists of one-component, 100% solids sealant system designed for edge sealing insulating glass (IG) units. Product does not require mixing, produces minimal waste, and adheres to glass and metal substrates. Available in black and gray, product meets/exceeds requirements of ASTM E773/774 and CAN/CGSB-12.8. Product is available in 5...
Read More »
Liquid Standards Generator handles highly reactive VOCs.
Model LSG-2-GF continuously blends flowing stream of calibration standards mixture. It uses permeation technology to add analyte to precisely known flow of clean water to form primary mixture, an aliquot of which is then diluted to form liquid standard. Dilution water flows are controlled by precision metering pumps. Concentrations ranging from sub ppb (w/w) to several ppm are possible, and...
Read More »
Laser Beam Profiler allows users to adjust laser at will.
Designed to measure beam profile and power of pulsed industrial Nd:YAG and Diode industrial lasers, BA100 displays laser beam intensity profile in real time. Instrument makes measurements at full or near full power levels (1,000 W max) and is useful for looking at focal spots. Beam profile can be shown in 3D form and rotated to different angles and elevations. Unit handles pulse energies to 30...
Read More »